Loading...
/* $Id: ns87303.h,v 1.1 1997/10/14 13:30:37 ecd Exp $ * ns87303.h: Configuration Register Description for the * National Semiconductor PC87303 (SuperIO). * * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) */ #ifndef _SPARC_NS87303_H #define _SPARC_NS87303_H 1 /* * Controll Register Index Values */ #define FER 0x00 #define FAR 0x01 #define PTR 0x02 #define FCR 0x03 #define PCR 0x04 #define KRR 0x05 #define PMC 0x06 #define TUP 0x07 #define SID 0x08 #define ASC 0x09 #define CS0CF0 0x0a #define CS0CF1 0x0b #define CS1CF0 0x0c #define CS1CF1 0x0d /* Function Address Register (FAR) bits */ #define FAR_LPT_MASK 0x03 #define FAR_LPTB 0x00 #define FAR_LPTA 0x01 #define FAR_LPTC 0x02 /* Power and Test Register (PTR) bits */ #define PTR_LPTB_IRQ7 0x08 #define PTR_LEVEL_IRQ 0x80 /* When not ECP/EPP: Use level IRQ */ #define PTR_LPT_REG_DIR 0x80 /* When ECP/EPP: LPT CTR controlls direction */ /* of the parallel port */ /* Function Control Register (FCR) bits */ #define FCR_ZWS_ENA 0x20 /* Enable short host read/write in ECP/EPP */ /* Printer Controll Register (PCR) bits */ #define PCR_EPP_ENABLE 0x01 #define PCR_EPP_IEEE 0x02 /* Enable EPP Version 1.9 (IEEE 1284) */ #define PCR_ECP_ENABLE 0x04 #define PCR_ECP_CLK_ENA 0x08 /* If 0 ECP Clock is stopped on Power down */ #define PCR_IRQ_POLAR 0x20 /* If 0 IRQ is level high or negative pulse, */ /* if 1 polarity is inverted */ #define PCR_IRQ_ODRAIN 0x40 /* If 1, IRQ is open drain */ /* Tape UARTs and Parallel Port Config Register (TUP) bits */ #define TUP_EPP_TIMO 0x02 /* Enable EPP timeout IRQ */ /* Advanced SuperIO Config Register (ASC) bits */ #define ASC_LPT_IRQ7 0x01 /* Allways use IRQ7 for LPT */ #ifdef __KERNEL__ #include <asm/system.h> #include <asm/io.h> static __inline__ void ns87303_writeb(unsigned long port, int index, unsigned char value) { unsigned long flags; save_flags(flags); cli(); outb(index, port); outb(value, port + 1); outb(value, port + 1); restore_flags(flags); } static __inline__ unsigned char ns87303_readb(unsigned long port, int index) { outb(index, port); return inb(port + 1); } #endif /* __KERNEL__ */ #endif /* !(_SPARC_NS87303_H) */ |