/*
 * sound/uart6850.c
 */
/*
 * Copyright (C) by Hannu Savolainen 1993-1997
 *
 * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
 * Version 2 (June 1991). See the "COPYING" file distributed with this software
 * for more info.
 * Extended by Alan Cox for Red Hat Software. Now a loadable MIDI driver.
 * 28/4/97 - (C) Copyright Alan Cox. Released under the GPL version 2.
 *
 */
#include <linux/config.h>
#include <linux/module.h>

/* Mon Nov 22 22:38:35 MET 1993 marco@driq.home.usn.nl:
 *      added 6850 support, used with COVOX SoundMaster II and custom cards.
 */

#include "sound_config.h"
#include "soundmodule.h"
#if defined(CONFIG_UART6850) && defined(CONFIG_MIDI) || defined(MODULE)

static int      uart6850_base = 0x330;

static int     *uart6850_osp;

#define	DATAPORT   (uart6850_base)
#define	COMDPORT   (uart6850_base+1)
#define	STATPORT   (uart6850_base+1)

static int
uart6850_status(void)
{
	return inb(STATPORT);
}
#define input_avail()		(uart6850_status()&INPUT_AVAIL)
#define output_ready()		(uart6850_status()&OUTPUT_READY)
static void
uart6850_cmd(unsigned char cmd)
{
	outb((cmd), COMDPORT);
}
static int
uart6850_read(void)
{
	return inb(DATAPORT);
}
static void
uart6850_write(unsigned char byte)
{
	outb((byte), DATAPORT);
}

#define	OUTPUT_READY	0x02	/* Mask for data ready Bit */
#define	INPUT_AVAIL	0x01	/* Mask for Data Send Ready Bit */

#define	UART_RESET	0x95
#define	UART_MODE_ON	0x03

static int      uart6850_opened = 0;
static int      uart6850_irq;
static int      uart6850_detected = 0;
static int      my_dev;

static int      reset_uart6850(void);
static void     (*midi_input_intr) (int dev, unsigned char data);
static void     poll_uart6850(unsigned long dummy);


static struct timer_list uart6850_timer =
{NULL, NULL, 0, 0, poll_uart6850};

static void
uart6850_input_loop(void)
{
	int             count;

	count = 10;

	while (count)		/*
				 * Not timed out
				 */
		if (input_avail())
		  {
			  unsigned char   c = uart6850_read();

			  count = 100;

			  if (uart6850_opened & OPEN_READ)
				  midi_input_intr(my_dev, c);
		} else
			while (!input_avail() && count)
				count--;
}

void
m6850intr(int irq, void *dev_id, struct pt_regs *dummy)
{
	if (input_avail())
		uart6850_input_loop();
}

/*
 * It looks like there is no input interrupts in the UART mode. Let's try
 * polling.
 */

static void
poll_uart6850(unsigned long dummy)
{
	unsigned long   flags;

	if (!(uart6850_opened & OPEN_READ))
		return;		/* Device has been closed */

	save_flags(flags);
	cli();

	if (input_avail())
		uart6850_input_loop();


	{
		uart6850_timer.expires = (1) + jiffies;
		add_timer(&uart6850_timer);
	};			/*
				   * Come back later
				 */

	restore_flags(flags);
}

static int
uart6850_open(int dev, int mode,
	      void            (*input) (int dev, unsigned char data),
	      void            (*output) (int dev)
)
{
	if (uart6850_opened)
	  {
		  printk("Midi6850: Midi busy\n");
		  return -EBUSY;
	  };

	MOD_INC_USE_COUNT;
	uart6850_cmd(UART_RESET);

	uart6850_input_loop();

	midi_input_intr = input;
	uart6850_opened = mode;
	poll_uart6850(0);	/*
				 * Enable input polling
				 */

	return 0;
}

static void
uart6850_close(int dev)
{
	uart6850_cmd(UART_MODE_ON);

	del_timer(&uart6850_timer);;
	uart6850_opened = 0;

	MOD_DEC_USE_COUNT;
}

static int
uart6850_out(int dev, unsigned char midi_byte)
{
	int             timeout;
	unsigned long   flags;

	/*
	 * Test for input since pending input seems to block the output.
	 */

	save_flags(flags);
	cli();

	if (input_avail())
		uart6850_input_loop();

	restore_flags(flags);

	/*
	 * Sometimes it takes about 13000 loops before the output becomes ready
	 * (After reset). Normally it takes just about 10 loops.
	 */

	for (timeout = 30000; timeout > 0 && !output_ready(); timeout--);	/*
										 * Wait
										 */

	if (!output_ready())
	  {
		  printk("Midi6850: Timeout\n");
		  return 0;
	  }
	uart6850_write(midi_byte);
	return 1;
}

static int
uart6850_command(int dev, unsigned char *midi_byte)
{
	return 1;
}

static int
uart6850_start_read(int dev)
{
	return 0;
}

static int
uart6850_end_read(int dev)
{
	return 0;
}

static void
uart6850_kick(int dev)
{
}

static int
uart6850_buffer_status(int dev)
{
	return 0;		/*
				 * No data in buffers
				 */
}

#define MIDI_SYNTH_NAME	"6850 UART Midi"
#define MIDI_SYNTH_CAPS	SYNTH_CAP_INPUT
#include "midi_synth.h"

static struct midi_operations uart6850_operations =
{
	{"6850 UART", 0, 0, SNDCARD_UART6850},
	&std_midi_synth,
	{0},
	uart6850_open,
	uart6850_close,
	NULL, /* ioctl */
	uart6850_out,
	uart6850_start_read,
	uart6850_end_read,
	uart6850_kick,
	uart6850_command,
	uart6850_buffer_status
};


void
attach_uart6850(struct address_info *hw_config)
{
	int             ok, timeout;
	unsigned long   flags;

	if ((my_dev = sound_alloc_mididev()) == -1)
	  {
		  printk(KERN_INFO "uart6850: Too many midi devices detected\n");
		  return;
	  }
	uart6850_base = hw_config->io_base;
	uart6850_osp = hw_config->osp;
	uart6850_irq = hw_config->irq;

	if (!uart6850_detected)
	  {
		  sound_unload_mididev(my_dev);
		  return;
	  }
	save_flags(flags);
	cli();

	for (timeout = 30000; timeout > 0 && !output_ready(); timeout--);	/*
										 * Wait
										 */
	uart6850_cmd(UART_MODE_ON);

	ok = 1;

	restore_flags(flags);

	conf_printf("6850 Midi Interface", hw_config);

	std_midi_synth.midi_dev = my_dev;
	hw_config->slots[4] = my_dev;
	midi_devs[my_dev] = &uart6850_operations;
	sequencer_init();
}

static int
reset_uart6850(void)
{
	uart6850_read();
	return 1;		/*
				 * OK
				 */
}


int
probe_uart6850(struct address_info *hw_config)
{
	int             ok = 0;

	uart6850_osp = hw_config->osp;
	uart6850_base = hw_config->io_base;
	uart6850_irq = hw_config->irq;

	if (snd_set_irq_handler(uart6850_irq, m6850intr, "MIDI6850", uart6850_osp) < 0)
		return 0;

	ok = reset_uart6850();

	uart6850_detected = ok;
	return ok;
}

void
unload_uart6850(struct address_info *hw_config)
{
	snd_release_irq(hw_config->irq);
	sound_unload_mididev(hw_config->slots[4]);
}


#ifdef MODULE

int             io = -1;
int             irq = -1;

struct address_info cfg;

int 
init_module(void)
{
	if (io == -1 || irq == -1)
	  {
		  printk("uart6850: irq and io must be set.\n");
		  return -EINVAL;
	  }
	cfg.io_base = io;
	cfg.irq = irq;

	if (probe_uart6850(&cfg))
		return -ENODEV;

	SOUND_LOCK;
	return 0;
}

void 
cleanup_module(void)
{
	unload_uart6850(&cfg);
	SOUND_LOCK_END;
}
#endif
#endif