Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 | // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/interrupt-controller/arm-gic.h> / { #address-cells = <2>; #size-cells = <2>; model = "Broadcom STB (bcm7445)"; compatible = "brcm,bcm7445", "brcm,brcmstb"; interrupt-parent = <&gic>; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { compatible = "brcm,brahma-b15"; device_type = "cpu"; enable-method = "brcm,brahma-b15"; reg = <0>; }; cpu@1 { compatible = "brcm,brahma-b15"; device_type = "cpu"; enable-method = "brcm,brahma-b15"; reg = <1>; }; cpu@2 { compatible = "brcm,brahma-b15"; device_type = "cpu"; enable-method = "brcm,brahma-b15"; reg = <2>; }; cpu@3 { compatible = "brcm,brahma-b15"; device_type = "cpu"; enable-method = "brcm,brahma-b15"; reg = <3>; }; }; gic: interrupt-controller@ffd00000 { compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic"; reg = <0x00 0xffd01000 0x00 0x1000>, <0x00 0xffd02000 0x00 0x2000>, <0x00 0xffd04000 0x00 0x2000>, <0x00 0xffd06000 0x00 0x2000>; interrupt-controller; #interrupt-cells = <3>; }; timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>; }; rdb@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; ranges = <0 0x00 0xf0000000 0x1000000>; serial@40ab00 { compatible = "ns16550a"; reg = <0x40ab00 0x20>; reg-shift = <2>; reg-io-width = <4>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <81000000>; }; sun_top_ctrl: syscon@404000 { compatible = "brcm,bcm7445-sun-top-ctrl", "syscon"; reg = <0x404000 0x51c>; }; hif_cpubiuctrl: syscon@3e2400 { compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon"; reg = <0x3e2400 0x5b4>; }; hif_continuation: syscon@452000 { compatible = "brcm,bcm7445-hif-continuation", "syscon"; reg = <0x452000 0x100>; }; irq0_intc: interrupt-controller@40a780 { compatible = "brcm,bcm7120-l2-intc"; interrupt-parent = <&gic>; #interrupt-cells = <1>; reg = <0x40a780 0x8>; interrupt-controller; interrupts = <GIC_SPI 0x45 0x0>, <GIC_SPI 0x43 0x0>; brcm,int-map-mask = <0x25c>, <0x7000000>; brcm,int-fwd-mask = <0x70000>; }; irq0_aon_intc: interrupt-controller@417280 { compatible = "brcm,bcm7120-l2-intc"; reg = <0x417280 0x8>; interrupt-parent = <&gic>; #interrupt-cells = <1>; interrupt-controller; interrupts = <GIC_SPI 0x46 0x0>, <GIC_SPI 0x44 0x0>, <GIC_SPI 0x49 0x0>; brcm,int-map-mask = <0x1e3 0x18000000 0x100000>; brcm,int-fwd-mask = <0x0>; brcm,irq-can-wake; }; hif_intr2_intc: interrupt-controller@3e1000 { compatible = "brcm,l2-intc"; reg = <0x3e1000 0x30>; interrupt-controller; #interrupt-cells = <1>; interrupts = <GIC_SPI 0x20 0x0>; interrupt-parent = <&gic>; interrupt-names = "hif"; }; aon_pm_l2_intc: interrupt-controller@410640 { compatible = "brcm,l2-intc"; reg = <0x410640 0x30>; interrupt-controller; #interrupt-cells = <1>; interrupts = <GIC_SPI 0x40 0x0>; interrupt-parent = <&gic>; brcm,irq-can-wake; }; aon-ctrl@410000 { compatible = "brcm,brcmstb-aon-ctrl"; reg = <0x410000 0x200>, <0x410200 0x400>; reg-names = "aon-ctrl", "aon-sram"; }; nand_controller: nand-controller@3e2800 { status = "disabled"; #address-cells = <1>; #size-cells = <0>; compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand"; reg-names = "nand", "flash-dma"; reg = <0x3e2800 0x600>, <0x3e3000 0x2c>; interrupt-parent = <&hif_intr2_intc>; interrupts = <24>, <4>; interrupt-names = "nand_ctlrdy", "flash_dma_done"; }; sata@45a000 { compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci"; reg-names = "ahci", "top-ctrl"; reg = <0x45a000 0xa9c>, <0x458040 0x24>; interrupts = <GIC_SPI 30 0>; #address-cells = <1>; #size-cells = <0>; sata0: sata-port@0 { reg = <0>; phys = <&sata_phy0>; }; sata1: sata-port@1 { reg = <1>; phys = <&sata_phy1>; }; }; sata_phy: sata-phy@458100 { compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; reg = <0x458100 0x1f00>; reg-names = "phy"; #address-cells = <0x1>; #size-cells = <0x0>; sata_phy0: sata-phy@0 { reg = <0>; #phy-cells = <0>; }; sata_phy1: sata-phy@1 { reg = <1>; #phy-cells = <0>; }; }; upg_gio: gpio@40a700 { compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; reg = <0x40a700 0x80>; #gpio-cells = <2>; #interrupt-cells = <2>; gpio-controller; interrupt-controller; interrupt-parent = <&irq0_intc>; interrupts = <6>; brcm,gpio-bank-widths = <32 32 32 24>; }; upg_gio_aon: gpio@4172c0 { compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; reg = <0x4172c0 0x40>; #gpio-cells = <2>; #interrupt-cells = <2>; gpio-controller; interrupt-controller; interrupts-extended = <&irq0_aon_intc 0x6>, <&aon_pm_l2_intc 0x5>; wakeup-source; brcm,gpio-bank-widths = <18 4>; }; }; memory_controllers@f1100000 { compatible = "simple-bus"; ranges = <0x0 0x0 0xf1100000 0x200000>; #address-cells = <1>; #size-cells = <1>; memc@0 { compatible = "brcm,brcmstb-memc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x80000>; memc-ddr@2000 { compatible = "brcm,brcmstb-memc-ddr"; reg = <0x2000 0x800>; }; ddr-phy@6000 { compatible = "brcm,brcmstb-ddr-phy-v240.1"; reg = <0x6000 0x21c>; }; shimphy@8000 { compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; reg = <0x8000 0xe4>; }; }; memc@80000 { compatible = "brcm,brcmstb-memc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x80000 0x80000>; memc-ddr@2000 { compatible = "brcm,brcmstb-memc-ddr"; reg = <0x2000 0x800>; }; ddr-phy@6000 { compatible = "brcm,brcmstb-ddr-phy-v240.1"; reg = <0x6000 0x21c>; }; shimphy@8000 { compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; reg = <0x8000 0xe4>; }; }; memc@100000 { compatible = "brcm,brcmstb-memc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x100000 0x80000>; memc-ddr@2000 { compatible = "brcm,brcmstb-memc-ddr"; reg = <0x2000 0x800>; }; ddr-phy@6000 { compatible = "brcm,brcmstb-ddr-phy-v240.1"; reg = <0x6000 0x21c>; }; shimphy@8000 { compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; reg = <0x8000 0xe4>; }; }; }; sram@ffe00000 { compatible = "brcm,boot-sram", "mmio-sram"; reg = <0x0 0xffe00000 0x0 0x10000>; }; smpboot { compatible = "brcm,brcmstb-smpboot"; syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; syscon-cont = <&hif_continuation>; }; reboot { compatible = "brcm,brcmstb-reboot"; syscon = <&sun_top_ctrl 0x304 0x308>; }; }; |