Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/serial/ingenic,uart.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Ingenic SoCs UART controller maintainers: - Paul Cercueil <paul@crapouillou.net> allOf: - $ref: serial.yaml# properties: $nodename: pattern: "^serial@[0-9a-f]+$" compatible: oneOf: - enum: - ingenic,jz4740-uart - ingenic,jz4750-uart - ingenic,jz4760-uart - ingenic,jz4780-uart - ingenic,x1000-uart - items: - enum: - ingenic,jz4770-uart - ingenic,jz4775-uart - const: ingenic,jz4760-uart - items: - const: ingenic,jz4725b-uart - const: ingenic,jz4740-uart - items: - const: ingenic,jz4755-uart - const: ingenic,jz4750-uart reg: maxItems: 1 interrupts: maxItems: 1 clocks: items: - description: Baud clock - description: UART module clock clock-names: items: - const: baud - const: module dmas: items: - description: DMA controller phandle and request line for RX - description: DMA controller phandle and request line for TX dma-names: items: - const: rx - const: tx required: - compatible - reg - interrupts - clocks - clock-names - dmas - dma-names unevaluatedProperties: false examples: - | #include <dt-bindings/clock/ingenic,jz4780-cgu.h> #include <dt-bindings/dma/jz4780-dma.h> #include <dt-bindings/gpio/gpio.h> serial@10032000 { compatible = "ingenic,jz4780-uart"; reg = <0x10032000 0x100>; interrupt-parent = <&intc>; interrupts = <49>; clocks = <&ext>, <&cgu JZ4780_CLK_UART2>; clock-names = "baud", "module"; dmas = <&dma JZ4780_DMA_UART2_RX 0xffffffff>, <&dma JZ4780_DMA_UART2_TX 0xffffffff>; dma-names = "rx", "tx"; bluetooth { compatible = "brcm,bcm4330-bt"; reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>; vbat-supply = <&wlan0_power>; device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>; }; }; |