Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Open Menu / arch / arm64 / boot / dts / rockchip / rk3568-fastrhino-r68s.dts
Loading...
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "rk3568-fastrhino-r66s.dtsi"

/ {
	model = "Lunzn FastRhino R68S";
	compatible = "lunzn,fastrhino-r68s", "rockchip,rk3568";

	aliases {
		ethernet0 = &gmac0;
		ethernet1 = &gmac1;
		mmc0 = &sdhci;
	};

	adc-keys {
		compatible = "adc-keys";
		io-channels = <&saradc 0>;
		io-channel-names = "buttons";
		keyup-threshold-microvolt = <1800000>;

		button-recovery {
			label = "Recovery";
			linux,code = <KEY_VENDOR>;
			press-threshold-microvolt = <1750>;
		};
	};
};

&gmac0 {
	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
	assigned-clock-rates = <0>, <125000000>;
	clock_in_out = "output";
	phy-handle = <&rgmii_phy0>;
	phy-mode = "rgmii-id";
	pinctrl-names = "default";
	pinctrl-0 = <&gmac0_miim
		     &gmac0_tx_bus2
		     &gmac0_rx_bus2
		     &gmac0_rgmii_clk
		     &gmac0_rgmii_bus>;
	snps,reset-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
	snps,reset-active-low;
	/* Reset time is 15ms, 50ms for rtl8211f */
	snps,reset-delays-us = <0 15000 50000>;
	tx_delay = <0x3c>;
	rx_delay = <0x2f>;
	status = "okay";
};

&gmac1 {
	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
	assigned-clock-rates = <0>, <125000000>;
	clock_in_out = "output";
	phy-handle = <&rgmii_phy1>;
	phy-mode = "rgmii-id";
	pinctrl-names = "default";
	pinctrl-0 = <&gmac1m1_miim
		     &gmac1m1_tx_bus2
		     &gmac1m1_rx_bus2
		     &gmac1m1_rgmii_clk
		     &gmac1m1_rgmii_bus>;
	snps,reset-gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
	snps,reset-active-low;
	/* Reset time is 15ms, 50ms for rtl8211f */
	snps,reset-delays-us = <0 15000 50000>;
	tx_delay = <0x4f>;
	rx_delay = <0x26>;
	status = "okay";
};

&mdio0 {
	rgmii_phy0: ethernet-phy@0 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <0>;
		pinctrl-0 = <&eth_phy0_reset_pin>;
		pinctrl-names = "default";
	};
};

&mdio1 {
	rgmii_phy1: ethernet-phy@0 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <0>;
		pinctrl-0 = <&eth_phy1_reset_pin>;
		pinctrl-names = "default";
	};
};

&pinctrl {
	gmac0 {
		eth_phy0_reset_pin: eth-phy0-reset-pin {
			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	gmac1 {
		eth_phy1_reset_pin: eth-phy1-reset-pin {
			rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};
};

&sdhci {
	bus-width = <8>;
	max-frequency = <200000000>;
	non-removable;
	pinctrl-names = "default";
	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
	status = "okay";
};