Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 | # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- $id: http://devicetree.org/schemas/phy/allwinner,sun50i-h6-usb-phy.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Allwinner H6 USB PHY maintainers: - Chen-Yu Tsai <wens@csie.org> - Maxime Ripard <mripard@kernel.org> properties: "#phy-cells": const: 1 compatible: const: allwinner,sun50i-h6-usb-phy reg: items: - description: PHY Control registers - description: PHY PMU0 registers - description: PHY PMU3 registers reg-names: items: - const: phy_ctrl - const: pmu0 - const: pmu3 clocks: items: - description: USB OTG PHY bus clock - description: USB Host PHY bus clock clock-names: items: - const: usb0_phy - const: usb3_phy resets: items: - description: USB OTG reset - description: USB Host Controller reset reset-names: items: - const: usb0_reset - const: usb3_reset usb0_id_det-gpios: maxItems: 1 description: GPIO to the USB OTG ID pin usb0_vbus_det-gpios: maxItems: 1 description: GPIO to the USB OTG VBUS detect pin usb0_vbus_power-supply: description: Power supply to detect the USB OTG VBUS usb0_vbus-supply: description: Regulator controlling USB OTG VBUS usb3_vbus-supply: description: Regulator controlling USB3 Host controller required: - "#phy-cells" - compatible - clocks - clock-names - reg - reg-names - resets - reset-names additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/sun50i-h6-ccu.h> #include <dt-bindings/reset/sun50i-h6-ccu.h> phy@5100400 { #phy-cells = <1>; compatible = "allwinner,sun50i-h6-usb-phy"; reg = <0x05100400 0x24>, <0x05101800 0x4>, <0x05311800 0x4>; reg-names = "phy_ctrl", "pmu0", "pmu3"; clocks = <&ccu CLK_USB_PHY0>, <&ccu CLK_USB_PHY3>; clock-names = "usb0_phy", "usb3_phy"; resets = <&ccu RST_USB_PHY0>, <&ccu RST_USB_PHY3>; reset-names = "usb0_reset", "usb3_reset"; usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */ usb0_vbus-supply = <®_vcc5v>; usb3_vbus-supply = <®_vcc5v>; }; |