Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 | /* SPDX-License-Identifier: GPL-1.0+ */ /* * Renesas USB driver * * Copyright (C) 2011 Renesas Solutions Corp. * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> */ #ifndef RENESAS_USB_DRIVER_H #define RENESAS_USB_DRIVER_H #include <linux/clk.h> #include <linux/extcon.h> #include <linux/platform_device.h> #include <linux/reset.h> #include <linux/usb/renesas_usbhs.h> struct usbhs_priv; #include "mod.h" #include "pipe.h" /* * * register define * */ #define SYSCFG 0x0000 #define BUSWAIT 0x0002 #define DVSTCTR 0x0008 #define TESTMODE 0x000C #define CFIFO 0x0014 #define CFIFOSEL 0x0020 #define CFIFOCTR 0x0022 #define D0FIFO 0x0100 #define D0FIFOSEL 0x0028 #define D0FIFOCTR 0x002A #define D1FIFO 0x0120 #define D1FIFOSEL 0x002C #define D1FIFOCTR 0x002E #define INTENB0 0x0030 #define INTENB1 0x0032 #define BRDYENB 0x0036 #define NRDYENB 0x0038 #define BEMPENB 0x003A #define INTSTS0 0x0040 #define INTSTS1 0x0042 #define BRDYSTS 0x0046 #define NRDYSTS 0x0048 #define BEMPSTS 0x004A #define FRMNUM 0x004C #define USBREQ 0x0054 /* USB request type register */ #define USBVAL 0x0056 /* USB request value register */ #define USBINDX 0x0058 /* USB request index register */ #define USBLENG 0x005A /* USB request length register */ #define DCPCFG 0x005C #define DCPMAXP 0x005E #define DCPCTR 0x0060 #define PIPESEL 0x0064 #define PIPECFG 0x0068 #define PIPEBUF 0x006A #define PIPEMAXP 0x006C #define PIPEPERI 0x006E #define PIPEnCTR 0x0070 #define PIPE1TRE 0x0090 #define PIPE1TRN 0x0092 #define PIPE2TRE 0x0094 #define PIPE2TRN 0x0096 #define PIPE3TRE 0x0098 #define PIPE3TRN 0x009A #define PIPE4TRE 0x009C #define PIPE4TRN 0x009E #define PIPE5TRE 0x00A0 #define PIPE5TRN 0x00A2 #define PIPEBTRE 0x00A4 #define PIPEBTRN 0x00A6 #define PIPECTRE 0x00A8 #define PIPECTRN 0x00AA #define PIPEDTRE 0x00AC #define PIPEDTRN 0x00AE #define PIPEETRE 0x00B0 #define PIPEETRN 0x00B2 #define PIPEFTRE 0x00B4 #define PIPEFTRN 0x00B6 #define PIPE9TRE 0x00B8 #define PIPE9TRN 0x00BA #define PIPEATRE 0x00BC #define PIPEATRN 0x00BE #define DEVADD0 0x00D0 /* Device address n configuration */ #define DEVADD1 0x00D2 #define DEVADD2 0x00D4 #define DEVADD3 0x00D6 #define DEVADD4 0x00D8 #define DEVADD5 0x00DA #define DEVADD6 0x00DC #define DEVADD7 0x00DE #define DEVADD8 0x00E0 #define DEVADD9 0x00E2 #define DEVADDA 0x00E4 #define D2FIFOSEL 0x00F0 /* for R-Car Gen2 */ #define D2FIFOCTR 0x00F2 /* for R-Car Gen2 */ #define D3FIFOSEL 0x00F4 /* for R-Car Gen2 */ #define D3FIFOCTR 0x00F6 /* for R-Car Gen2 */ #define SUSPMODE 0x0102 /* for RZ/A */ /* SYSCFG */ #define SCKE (1 << 10) /* USB Module Clock Enable */ #define CNEN (1 << 8) /* Single-ended receiver operation Enable */ #define HSE (1 << 7) /* High-Speed Operation Enable */ #define DCFM (1 << 6) /* Controller Function Select */ #define DRPD (1 << 5) /* D+ Line/D- Line Resistance Control */ #define DPRPU (1 << 4) /* D+ Line Resistance Control */ #define USBE (1 << 0) /* USB Module Operation Enable */ #define UCKSEL (1 << 2) /* Clock Select for RZ/A1 */ #define UPLLE (1 << 1) /* USB PLL Enable for RZ/A1 */ /* DVSTCTR */ #define EXTLP (1 << 10) /* Controls the EXTLP pin output state */ #define PWEN (1 << 9) /* Controls the PWEN pin output state */ #define USBRST (1 << 6) /* Bus Reset Output */ #define UACT (1 << 4) /* USB Bus Enable */ #define RHST (0x7) /* Reset Handshake */ #define RHST_LOW_SPEED 1 /* Low-speed connection */ #define RHST_FULL_SPEED 2 /* Full-speed connection */ #define RHST_HIGH_SPEED 3 /* High-speed connection */ /* CFIFOSEL */ #define DREQE (1 << 12) /* DMA Transfer Request Enable */ #define MBW_32 (0x2 << 10) /* CFIFO Port Access Bit Width */ /* CFIFOCTR */ #define BVAL (1 << 15) /* Buffer Memory Enable Flag */ #define BCLR (1 << 14) /* CPU buffer clear */ #define FRDY (1 << 13) /* FIFO Port Ready */ #define DTLN_MASK (0x0FFF) /* Receive Data Length */ /* INTENB0 */ #define VBSE (1 << 15) /* Enable IRQ VBUS_0 and VBUSIN_0 */ #define RSME (1 << 14) /* Enable IRQ Resume */ #define SOFE (1 << 13) /* Enable IRQ Frame Number Update */ #define DVSE (1 << 12) /* Enable IRQ Device State Transition */ #define CTRE (1 << 11) /* Enable IRQ Control Stage Transition */ #define BEMPE (1 << 10) /* Enable IRQ Buffer Empty */ #define NRDYE (1 << 9) /* Enable IRQ Buffer Not Ready Response */ #define BRDYE (1 << 8) /* Enable IRQ Buffer Ready */ /* INTENB1 */ #define BCHGE (1 << 14) /* USB Bus Change Interrupt Enable */ #define DTCHE (1 << 12) /* Disconnection Detect Interrupt Enable */ #define ATTCHE (1 << 11) /* Connection Detect Interrupt Enable */ #define EOFERRE (1 << 6) /* EOF Error Detect Interrupt Enable */ #define SIGNE (1 << 5) /* Setup Transaction Error Interrupt Enable */ #define SACKE (1 << 4) /* Setup Transaction ACK Interrupt Enable */ /* INTSTS0 */ #define VBINT (1 << 15) /* VBUS0_0 and VBUS1_0 Interrupt Status */ #define DVST (1 << 12) /* Device State Transition Interrupt Status */ #define CTRT (1 << 11) /* Control Stage Interrupt Status */ #define BEMP (1 << 10) /* Buffer Empty Interrupt Status */ #define BRDY (1 << 8) /* Buffer Ready Interrupt Status */ #define VBSTS (1 << 7) /* VBUS_0 and VBUSIN_0 Input Status */ #define VALID (1 << 3) /* USB Request Receive */ #define DVSQ_MASK (0x7 << 4) /* Device State */ #define POWER_STATE (0 << 4) #define DEFAULT_STATE (1 << 4) #define ADDRESS_STATE (2 << 4) #define CONFIGURATION_STATE (3 << 4) #define SUSPENDED_STATE (4 << 4) #define CTSQ_MASK (0x7) /* Control Transfer Stage */ #define IDLE_SETUP_STAGE 0 /* Idle stage or setup stage */ #define READ_DATA_STAGE 1 /* Control read data stage */ #define READ_STATUS_STAGE 2 /* Control read status stage */ #define WRITE_DATA_STAGE 3 /* Control write data stage */ #define WRITE_STATUS_STAGE 4 /* Control write status stage */ #define NODATA_STATUS_STAGE 5 /* Control write NoData status stage */ #define SEQUENCE_ERROR 6 /* Control transfer sequence error */ /* INTSTS1 */ #define OVRCR (1 << 15) /* OVRCR Interrupt Status */ #define BCHG (1 << 14) /* USB Bus Change Interrupt Status */ #define DTCH (1 << 12) /* USB Disconnection Detect Interrupt Status */ #define ATTCH (1 << 11) /* ATTCH Interrupt Status */ #define EOFERR (1 << 6) /* EOF Error Detect Interrupt Status */ #define SIGN (1 << 5) /* Setup Transaction Error Interrupt Status */ #define SACK (1 << 4) /* Setup Transaction ACK Response Interrupt Status */ /* PIPECFG */ /* DCPCFG */ #define TYPE_NONE (0 << 14) /* Transfer Type */ #define TYPE_BULK (1 << 14) #define TYPE_INT (2 << 14) #define TYPE_ISO (3 << 14) #define BFRE (1 << 10) /* BRDY Interrupt Operation Spec. */ #define DBLB (1 << 9) /* Double Buffer Mode */ #define SHTNAK (1 << 7) /* Pipe Disable in Transfer End */ #define DIR_OUT (1 << 4) /* Transfer Direction */ /* PIPEMAXP */ /* DCPMAXP */ #define DEVSEL_MASK (0xF << 12) /* Device Select */ #define DCP_MAXP_MASK (0x7F) #define PIPE_MAXP_MASK (0x7FF) /* PIPEBUF */ #define BUFSIZE_SHIFT 10 #define BUFSIZE_MASK (0x1F << BUFSIZE_SHIFT) #define BUFNMB_MASK (0xFF) /* PIPEnCTR */ /* DCPCTR */ #define BSTS (1 << 15) /* Buffer Status */ #define SUREQ (1 << 14) /* Sending SETUP Token */ #define INBUFM (1 << 14) /* (PIPEnCTR) Transfer Buffer Monitor */ #define CSSTS (1 << 12) /* CSSTS Status */ #define ACLRM (1 << 9) /* Buffer Auto-Clear Mode */ #define SQCLR (1 << 8) /* Toggle Bit Clear */ #define SQSET (1 << 7) /* Toggle Bit Set */ #define SQMON (1 << 6) /* Toggle Bit Check */ #define PBUSY (1 << 5) /* Pipe Busy */ #define PID_MASK (0x3) /* Response PID */ #define PID_NAK 0 #define PID_BUF 1 #define PID_STALL10 2 #define PID_STALL11 3 #define CCPL (1 << 2) /* Control Transfer End Enable */ /* PIPEnTRE */ #define TRENB (1 << 9) /* Transaction Counter Enable */ #define TRCLR (1 << 8) /* Transaction Counter Clear */ /* FRMNUM */ #define FRNM_MASK (0x7FF) /* DEVADDn */ #define UPPHUB(x) (((x) & 0xF) << 11) /* HUB Register */ #define HUBPORT(x) (((x) & 0x7) << 8) /* HUB Port for Target Device */ #define USBSPD(x) (((x) & 0x3) << 6) /* Device Transfer Rate */ #define USBSPD_SPEED_LOW 0x1 #define USBSPD_SPEED_FULL 0x2 #define USBSPD_SPEED_HIGH 0x3 /* SUSPMODE */ #define SUSPM (1 << 14) /* SuspendM Control */ /* * struct */ struct usbhs_priv { void __iomem *base; unsigned int irq; const struct renesas_usbhs_platform_callback *pfunc; struct renesas_usbhs_driver_param dparam; struct delayed_work notify_hotplug_work; struct platform_device *pdev; struct extcon_dev *edev; spinlock_t lock; /* * module control */ struct usbhs_mod_info mod_info; /* * pipe control */ struct usbhs_pipe_info pipe_info; /* * fifo control */ struct usbhs_fifo_info fifo_info; struct phy *phy; struct reset_control *rsts; struct clk *clks[2]; }; /* * common */ u16 usbhs_read(struct usbhs_priv *priv, u32 reg); void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data); void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data); #define usbhs_lock(p, f) spin_lock_irqsave(usbhs_priv_to_lock(p), f) #define usbhs_unlock(p, f) spin_unlock_irqrestore(usbhs_priv_to_lock(p), f) int usbhs_get_id_as_gadget(struct platform_device *pdev); /* * sysconfig */ void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable); void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable); void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable); void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode); /* * usb request */ void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req); void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req); /* * bus */ void usbhs_bus_send_sof_enable(struct usbhs_priv *priv); void usbhs_bus_send_reset(struct usbhs_priv *priv); int usbhs_bus_get_speed(struct usbhs_priv *priv); int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable); int usbhsc_schedule_notify_hotplug(struct platform_device *pdev); /* * frame */ int usbhs_frame_get_num(struct usbhs_priv *priv); /* * device config */ int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, u16 upphub, u16 hubport, u16 speed); /* * interrupt functions */ void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit); /* * data */ struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev); #define usbhs_get_dparam(priv, param) (priv->dparam.param) #define usbhs_priv_to_pdev(priv) (priv->pdev) #define usbhs_priv_to_dev(priv) (&priv->pdev->dev) #define usbhs_priv_to_lock(priv) (&priv->lock) #endif /* RENESAS_USB_DRIVER_H */ |