Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Open Menu / Documentation / devicetree / bindings / sound / qcom,wcd938x.yaml
Loading...
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/qcom,wcd938x.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm WCD9380/WCD9385 Audio Codec

maintainers:
  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

description: |
  Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC.
  It has RX and TX Soundwire slave devices.

allOf:
  - $ref: dai-common.yaml#
  - $ref: qcom,wcd93xx-common.yaml#

properties:
  compatible:
    enum:
      - qcom,wcd9380-codec
      - qcom,wcd9385-codec

  us-euro-gpios:
    description: GPIO spec for swapping gnd and mic segments
    maxItems: 1

required:
  - compatible

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    codec {
        compatible = "qcom,wcd9380-codec";
        reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
        #sound-dai-cells = <1>;
        qcom,tx-device = <&wcd938x_tx>;
        qcom,rx-device = <&wcd938x_rx>;
        qcom,micbias1-microvolt = <1800000>;
        qcom,micbias2-microvolt = <1800000>;
        qcom,micbias3-microvolt = <1800000>;
        qcom,micbias4-microvolt = <1800000>;
        qcom,hphl-jack-type-normally-closed;
        qcom,ground-jack-type-normally-closed;
        qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
        qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
    };

    /* ... */

    soundwire@3210000 {
        #address-cells = <2>;
        #size-cells = <0>;
        reg = <0x03210000 0x2000>;
        wcd938x_rx: codec@0,4 {
            compatible = "sdw20217010d00";
            reg = <0 4>;
            qcom,rx-port-mapping = <1 2 3 4 5>;
        };
    };

    soundwire@3230000 {
        #address-cells = <2>;
        #size-cells = <0>;
        reg = <0x03230000 0x2000>;
        wcd938x_tx: codec@0,3 {
            compatible = "sdw20217010d00";
            reg = <0 3>;
            qcom,tx-port-mapping = <2 3 4 5>;
        };
    };

...