Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/rtc/ingenic,rtc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Ingenic SoCs Real-Time Clock maintainers: - Paul Cercueil <paul@crapouillou.net> allOf: - $ref: rtc.yaml# - if: not: properties: compatible: contains: enum: - ingenic,jz4770-rtc - ingenic,jz4780-rtc then: properties: "#clock-cells": false properties: compatible: oneOf: - enum: - ingenic,jz4740-rtc - ingenic,jz4760-rtc - items: - const: ingenic,jz4725b-rtc - const: ingenic,jz4740-rtc - items: - enum: - ingenic,jz4770-rtc - ingenic,jz4780-rtc - const: ingenic,jz4760-rtc reg: maxItems: 1 interrupts: maxItems: 1 clocks: maxItems: 1 clock-names: const: rtc "#clock-cells": const: 0 system-power-controller: description: | Indicates that the RTC is responsible for powering OFF the system. type: boolean ingenic,reset-pin-assert-time-ms: minimum: 0 maximum: 125 default: 60 description: | Reset pin low-level assertion time after wakeup (assuming RTC clock at 32 kHz) ingenic,min-wakeup-pin-assert-time-ms: minimum: 0 maximum: 2000 default: 100 description: | Minimum wakeup pin assertion time (assuming RTC clock at 32 kHz) required: - compatible - reg - interrupts - clocks - clock-names unevaluatedProperties: false examples: - | #include <dt-bindings/clock/ingenic,jz4740-cgu.h> rtc_dev: rtc@10003000 { compatible = "ingenic,jz4740-rtc"; reg = <0x10003000 0x40>; interrupt-parent = <&intc>; interrupts = <15>; clocks = <&cgu JZ4740_CLK_RTC>; clock-names = "rtc"; }; - | #include <dt-bindings/clock/ingenic,jz4780-cgu.h> rtc: rtc@10003000 { compatible = "ingenic,jz4780-rtc", "ingenic,jz4760-rtc"; reg = <0x10003000 0x4c>; interrupt-parent = <&intc>; interrupts = <32>; clocks = <&cgu JZ4780_CLK_RTCLK>; clock-names = "rtc"; #clock-cells = <0>; }; |