Loading...
/* SPDX-License-Identifier: GPL-2.0 */ #ifndef __ASM_SH_RENESAS_SH7785LCR_H #define __ASM_SH_RENESAS_SH7785LCR_H /* * This board has 2 physical memory maps. * It can be changed with DIP switch(S2-5). * * phys address | S2-5 = OFF | S2-5 = ON * -----------------------------+---------------+--------------- * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD * 0x06000000 - 0x07ffffff(CS1) | I2C | I2C * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 * 0x14000000 - 0x17ffffff(CS5) | reserved | USB * 0x18000000 - 0x1bffffff(CS6) | reserved | SD * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) * */ #define NOR_FLASH_ADDR 0x00000000 #define NOR_FLASH_SIZE 0x04000000 #define PLD_BASE_ADDR 0x04000000 #define PLD_PCICR (PLD_BASE_ADDR + 0x00) #define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02) #define PLD_LOCALCR (PLD_BASE_ADDR + 0x04) #define PLD_POFCR (PLD_BASE_ADDR + 0x06) #define PLD_LEDCR (PLD_BASE_ADDR + 0x08) #define PLD_SWSR (PLD_BASE_ADDR + 0x0a) #define PLD_VERSR (PLD_BASE_ADDR + 0x0c) #define PLD_MMSR (PLD_BASE_ADDR + 0x0e) #define PCA9564_ADDR 0x06000000 /* I2C */ #define PCA9564_SIZE 0x00000100 #define PCA9564_PROTO_32BIT_ADDR 0x14000000 #define SM107_MEM_ADDR 0x10000000 #define SM107_MEM_SIZE 0x00e00000 #define SM107_REG_ADDR 0x13e00000 #define SM107_REG_SIZE 0x00200000 #if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS) #define R8A66597_ADDR 0x14000000 /* USB */ #define CG200_ADDR 0x18000000 /* SD */ #else #define R8A66597_ADDR 0x08000000 #define CG200_ADDR 0x0c000000 #endif #define R8A66597_SIZE 0x00000100 #define CG200_SIZE 0x00010000 #endif /* __ASM_SH_RENESAS_SH7785LCR_H */ |