Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 | // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2009 Extreme Engineering Solutions, Inc. * Based on TQM8548 device tree * * XPedite5200 PrPMC/XMC module based on MPC8548E. This dts is for the * xMon boot loader memory map which differs from U-Boot's. */ /dts-v1/; / { model = "xes,xpedite5200"; compatible = "xes,xpedite5200", "xes,MPC8548"; #address-cells = <1>; #size-cells = <1>; form-factor = "PMC/XMC"; boot-bank = <0x0>; aliases { ethernet0 = &enet0; ethernet1 = &enet1; ethernet2 = &enet2; ethernet3 = &enet3; serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; pci1 = &pci1; }; cpus { #address-cells = <1>; #size-cells = <0>; PowerPC,8548@0 { device_type = "cpu"; reg = <0>; d-cache-line-size = <32>; // 32 bytes i-cache-line-size = <32>; // 32 bytes d-cache-size = <0x8000>; // L1, 32K i-cache-size = <0x8000>; // L1, 32K next-level-cache = <&L2>; }; }; memory { device_type = "memory"; reg = <0x0 0x0>; // Filled in by boot loader }; soc@ef000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; ranges = <0x0 0xef000000 0x100000>; bus-frequency = <0>; compatible = "fsl,mpc8548-immr", "simple-bus"; ecm-law@0 { compatible = "fsl,ecm-law"; reg = <0x0 0x1000>; fsl,num-laws = <12>; }; ecm@1000 { compatible = "fsl,mpc8548-ecm", "fsl,ecm"; reg = <0x1000 0x1000>; interrupts = <17 2>; interrupt-parent = <&mpic>; }; memory-controller@2000 { compatible = "fsl,mpc8548-memory-controller"; reg = <0x2000 0x1000>; interrupt-parent = <&mpic>; interrupts = <18 2>; }; L2: l2-cache-controller@20000 { compatible = "fsl,mpc8548-l2-cache-controller"; reg = <0x20000 0x1000>; cache-line-size = <32>; // 32 bytes cache-size = <0x80000>; // L2, 512K interrupt-parent = <&mpic>; interrupts = <16 2>; }; /* On-card I2C */ i2c@3000 { #address-cells = <1>; #size-cells = <0>; cell-index = <0>; compatible = "fsl-i2c"; reg = <0x3000 0x100>; interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; /* * Board GPIO: * 0: BRD_CFG0 (1: P14 IO present) * 1: BRD_CFG1 (1: FP ethernet present) * 2: BRD_CFG2 (1: XMC IO present) * 3: XMC root complex indicator * 4: Flash boot device indicator * 5: Flash write protect enable * 6: PMC monarch indicator * 7: PMC EREADY */ gpio1: gpio@18 { compatible = "nxp,pca9556"; reg = <0x18>; #gpio-cells = <2>; gpio-controller; polarity = <0x00>; }; /* P14 GPIO */ gpio2: gpio@19 { compatible = "nxp,pca9556"; reg = <0x19>; #gpio-cells = <2>; gpio-controller; polarity = <0x00>; }; eeprom@50 { compatible = "atmel,at24c16"; reg = <0x50>; }; rtc@68 { compatible = "st,m41t00", "dallas,ds1338"; reg = <0x68>; }; dtt@34 { compatible = "maxim,max1237"; reg = <0x34>; }; }; /* Off-card I2C */ i2c@3100 { #address-cells = <1>; #size-cells = <0>; cell-index = <1>; compatible = "fsl-i2c"; reg = <0x3100 0x100>; interrupts = <43 2>; interrupt-parent = <&mpic>; dfsrr; }; dma@21300 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; reg = <0x21300 0x4>; ranges = <0x0 0x21100 0x200>; cell-index = <0>; dma-channel@0 { compatible = "fsl,mpc8548-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; interrupt-parent = <&mpic>; interrupts = <20 2>; }; dma-channel@80 { compatible = "fsl,mpc8548-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; interrupt-parent = <&mpic>; interrupts = <21 2>; }; dma-channel@100 { compatible = "fsl,mpc8548-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x100 0x80>; cell-index = <2>; interrupt-parent = <&mpic>; interrupts = <22 2>; }; dma-channel@180 { compatible = "fsl,mpc8548-dma-channel", "fsl,eloplus-dma-channel"; reg = <0x180 0x80>; cell-index = <3>; interrupt-parent = <&mpic>; interrupts = <23 2>; }; }; /* eTSEC1: Front panel port 0 */ enet0: ethernet@24000 { #address-cells = <1>; #size-cells = <1>; cell-index = <0>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; ranges = <0x0 0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 30 2 34 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy0>; mdio@520 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-mdio"; reg = <0x520 0x20>; phy0: ethernet-phy@1 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <0x1>; }; phy1: ethernet-phy@2 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <0x2>; }; phy2: ethernet-phy@3 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <0x3>; }; phy3: ethernet-phy@4 { interrupt-parent = <&mpic>; interrupts = <8 1>; reg = <0x4>; }; tbi0: tbi-phy@11 { reg = <0x11>; device_type = "tbi-phy"; }; }; }; /* eTSEC2: Front panel port 1 */ enet1: ethernet@25000 { #address-cells = <1>; #size-cells = <1>; cell-index = <1>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x25000 0x1000>; ranges = <0x0 0x25000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 36 2 40 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy1>; mdio@520 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-tbi"; reg = <0x520 0x20>; tbi1: tbi-phy@11 { reg = <0x11>; device_type = "tbi-phy"; }; }; }; /* eTSEC3: Rear panel port 2 */ enet2: ethernet@26000 { #address-cells = <1>; #size-cells = <1>; cell-index = <2>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; ranges = <0x0 0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 32 2 33 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi2>; phy-handle = <&phy2>; mdio@520 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-tbi"; reg = <0x520 0x20>; tbi2: tbi-phy@11 { reg = <0x11>; device_type = "tbi-phy"; }; }; }; /* eTSEC4: Rear panel port 3 */ enet3: ethernet@27000 { #address-cells = <1>; #size-cells = <1>; cell-index = <3>; device_type = "network"; model = "eTSEC"; compatible = "gianfar"; reg = <0x27000 0x1000>; ranges = <0x0 0x27000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 2 38 2 39 2>; interrupt-parent = <&mpic>; tbi-handle = <&tbi3>; phy-handle = <&phy3>; mdio@520 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,gianfar-tbi"; reg = <0x520 0x20>; tbi3: tbi-phy@11 { reg = <0x11>; device_type = "tbi-phy"; }; }; }; serial0: serial@4500 { cell-index = <0>; device_type = "serial"; compatible = "fsl,ns16550", "ns16550"; reg = <0x4500 0x100>; clock-frequency = <0>; current-speed = <9600>; interrupts = <42 2>; interrupt-parent = <&mpic>; }; serial1: serial@4600 { cell-index = <1>; device_type = "serial"; compatible = "fsl,ns16550", "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; current-speed = <9600>; interrupts = <42 2>; interrupt-parent = <&mpic>; }; global-utilities@e0000 { // global utilities reg compatible = "fsl,mpc8548-guts"; reg = <0xe0000 0x1000>; fsl,has-rstcr; }; mpic: pic@40000 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; reg = <0x40000 0x40000>; compatible = "chrp,open-pic"; device_type = "open-pic"; }; }; localbus@ef005000 { compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus", "simple-bus"; #address-cells = <2>; #size-cells = <1>; reg = <0xef005000 0x100>; // BRx, ORx, etc. interrupt-parent = <&mpic>; interrupts = <19 2>; ranges = < 0 0x0 0xf8000000 0x08000000 // NOR boot flash 1 0x0 0xf0000000 0x08000000 // NOR expansion flash 2 0x0 0xe8000000 0x00010000 // NAND CE1 3 0x0 0xe8010000 0x00010000 // NAND CE2 >; nor-boot@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; reg = <0 0x0 0x4000000>; bank-width = <2>; partition@0 { label = "Primary OS"; reg = <0x00000000 0x180000>; }; partition@180000 { label = "Secondary OS"; reg = <0x00180000 0x180000>; }; partition@300000 { label = "User"; reg = <0x00300000 0x3c80000>; }; partition@3f80000 { label = "Boot firmware"; reg = <0x03f80000 0x80000>; }; }; nor-alternate@1,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; reg = <1 0x0 0x4000000>; bank-width = <2>; partition@0 { label = "Filesystem"; reg = <0x00000000 0x3f80000>; }; partition@3f80000 { label = "Alternate boot firmware"; reg = <0x03f80000 0x80000>; }; }; nand@2,0 { #address-cells = <1>; #size-cells = <1>; compatible = "xes,address-ctl-nand"; reg = <2 0x0 0x10000>; cle-line = <0x8>; /* CLE tied to A3 */ ale-line = <0x10>; /* ALE tied to A4 */ partition@0 { label = "NAND Filesystem"; reg = <0 0x40000000>; }; }; }; /* PMC interface */ pci0: pci@ef008000 { #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; device_type = "pci"; reg = <0xef008000 0x1000>; clock-frequency = <33333333>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL */ 0xe000 0 0 1 &mpic 2 1 0xe000 0 0 2 &mpic 3 1>; interrupt-parent = <&mpic>; interrupts = <24 2>; bus-range = <0 0>; ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 0x01000000 0 0x00000000 0xd0000000 0 0x01000000>; }; /* XMC PCIe */ pci1: pcie@ef00a000 { interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x0 */ 0x00000 0 0 1 &mpic 0 1 0x00000 0 0 2 &mpic 1 1 0x00000 0 0 3 &mpic 2 1 0x00000 0 0 4 &mpic 3 1>; interrupt-parent = <&mpic>; interrupts = <26 2>; bus-range = <0 0xff>; ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000 0x01000000 0 0x00000000 0xd1000000 0 0x01000000>; clock-frequency = <33333333>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; reg = <0xef00a000 0x1000>; compatible = "fsl,mpc8548-pcie"; device_type = "pci"; pcie@0 { reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; ranges = <0x02000000 0 0xc0000000 0x02000000 0 0xc0000000 0 0x20000000 0x01000000 0 0x00000000 0x01000000 0 0x00000000 0 0x08000000>; }; }; /* Needed for dtbImage boot wrapper compatibility */ chosen { stdout-path = &serial0; }; }; |