Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 | // SPDX-License-Identifier: GPL-2.0 /* * Device Tree file for Cortina systems Gemini SoC */ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/cortina,gemini-clock.h> #include <dt-bindings/reset/cortina,gemini-reset.h> #include <dt-bindings/gpio/gpio.h> / { soc { #address-cells = <1>; #size-cells = <1>; ranges; compatible = "simple-bus"; interrupt-parent = <&intcon>; flash@30000000 { compatible = "cortina,gemini-flash", "cfi-flash"; syscon = <&syscon>; pinctrl-names = "default"; pinctrl-0 = <&pflash_default_pins>; bank-width = <2>; #address-cells = <1>; #size-cells = <1>; status = "disabled"; }; syscon: syscon@40000000 { compatible = "cortina,gemini-syscon", "syscon", "simple-mfd"; reg = <0x40000000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; syscon-reboot { compatible = "syscon-reboot"; regmap = <&syscon>; /* GLOBAL_RESET register */ offset = <0x0c>; /* RESET_GLOBAL | RESET_CPU1 */ mask = <0xC0000000>; }; pinctrl { compatible = "cortina,gemini-pinctrl"; regmap = <&syscon>; /* Hog the DRAM pins */ pinctrl-names = "default"; pinctrl-0 = <&dram_default_pins>, <&system_default_pins>, <&vcontrol_default_pins>; dram_default_pins: pinctrl-dram { mux { function = "dram"; groups = "dramgrp"; }; }; rtc_default_pins: pinctrl-rtc { mux { function = "rtc"; groups = "rtcgrp"; }; }; power_default_pins: pinctrl-power { mux { function = "power"; groups = "powergrp"; }; }; cir_default_pins: pinctrl-cir { mux { function = "cir"; groups = "cirgrp"; }; }; system_default_pins: pinctrl-system { mux { function = "system"; groups = "systemgrp"; }; }; vcontrol_default_pins: pinctrl-vcontrol { mux { function = "vcontrol"; groups = "vcontrolgrp"; }; }; ice_default_pins: pinctrl-ice { mux { function = "ice"; groups = "icegrp"; }; }; uart_default_pins: pinctrl-uart { mux { function = "uart"; groups = "uartrxtxgrp"; }; }; pflash_default_pins: pinctrl-pflash { mux { function = "pflash"; groups = "pflashgrp"; }; }; usb_default_pins: pinctrl-usb { mux { function = "usb"; groups = "usbgrp"; }; }; gmii_default_pins: pinctrl-gmii { /* * Only activate GMAC0 by default since * GMAC1 will overlap with 8 GPIO lines * gpio2a, gpio2b. Overlay groups with * "gmii_gmac0_grp", "gmii_gmac1_grp" for * both ethernet interfaces. */ mux { function = "gmii"; groups = "gmii_gmac0_grp"; }; }; pci_default_pins: pinctrl-pci { mux { function = "pci"; groups = "pcigrp"; }; }; sata_default_pins: pinctrl-sata { mux { function = "sata"; groups = "satagrp"; }; }; /* Activate both groups of pins for this state */ sata_and_ide_pins: pinctrl-sata-ide { mux0 { function = "sata"; groups = "satagrp"; }; mux1 { function = "ide"; groups = "idegrp"; }; }; tvc_default_pins: pinctrl-tvc { mux { function = "tvc"; groups = "tvcgrp"; }; }; }; }; watchdog@41000000 { compatible = "cortina,gemini-watchdog", "faraday,ftwdt010"; reg = <0x41000000 0x1000>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon GEMINI_RESET_WDOG>; clocks = <&syscon GEMINI_CLK_APB>; clock-names = "PCLK"; }; uart0: serial@42000000 { compatible = "ns16550a"; reg = <0x42000000 0x100>; resets = <&syscon GEMINI_RESET_UART>; clocks = <&syscon GEMINI_CLK_UART>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&uart_default_pins>; reg-shift = <2>; }; timer@43000000 { compatible = "faraday,fttmr010"; reg = <0x43000000 0x1000>; interrupt-parent = <&intcon>; interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */ <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */ <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */ resets = <&syscon GEMINI_RESET_TIMER>; /* APB clock or RTC clock */ clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>; clock-names = "PCLK", "EXTCLK"; syscon = <&syscon>; }; rtc@45000000 { compatible = "cortina,gemini-rtc"; reg = <0x45000000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon GEMINI_RESET_RTC>; clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>; clock-names = "PCLK", "EXTCLK"; pinctrl-names = "default"; pinctrl-0 = <&rtc_default_pins>; }; sata: sata@46000000 { compatible = "cortina,gemini-sata-bridge"; reg = <0x46000000 0x100>; resets = <&syscon GEMINI_RESET_SATA0>, <&syscon GEMINI_RESET_SATA1>; reset-names = "sata0", "sata1"; clocks = <&syscon GEMINI_CLK_GATE_SATA0>, <&syscon GEMINI_CLK_GATE_SATA1>; clock-names = "SATA0_PCLK", "SATA1_PCLK"; /* * This defines the special "ide" state that needs * to be explicitly enabled to enable the IDE pins, * as these pins are normally used for other things. */ pinctrl-names = "default", "ide"; pinctrl-0 = <&sata_default_pins>; pinctrl-1 = <&sata_and_ide_pins>; syscon = <&syscon>; status = "disabled"; }; intcon: interrupt-controller@48000000 { compatible = "faraday,ftintc010"; reg = <0x48000000 0x1000>; resets = <&syscon GEMINI_RESET_INTCON0>; interrupt-controller; #interrupt-cells = <2>; }; power-controller@4b000000 { compatible = "cortina,gemini-power-controller"; reg = <0x4b000000 0x100>; interrupts = <26 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&power_default_pins>; }; gpio0: gpio@4d000000 { compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; reg = <0x4d000000 0x100>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon GEMINI_RESET_GPIO0>; clocks = <&syscon GEMINI_CLK_APB>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio1: gpio@4e000000 { compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; reg = <0x4e000000 0x100>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon GEMINI_RESET_GPIO1>; clocks = <&syscon GEMINI_CLK_APB>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio2: gpio@4f000000 { compatible = "cortina,gemini-gpio", "faraday,ftgpio010"; reg = <0x4f000000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon GEMINI_RESET_GPIO2>; clocks = <&syscon GEMINI_CLK_APB>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; pci@50000000 { compatible = "cortina,gemini-pci", "faraday,ftpci100"; /* * The first 256 bytes in the IO range is actually used * to configure the host bridge. */ reg = <0x50000000 0x100>; resets = <&syscon GEMINI_RESET_PCI>; clocks = <&syscon GEMINI_CLK_GATE_PCI>, <&syscon GEMINI_CLK_PCI>; clock-names = "PCLK", "PCICLK"; pinctrl-names = "default"; pinctrl-0 = <&pci_default_pins>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; status = "disabled"; bus-range = <0x00 0xff>; /* PCI ranges mappings */ ranges = /* 1MiB I/O space 0x50000000-0x500fffff */ <0x01000000 0 0 0x50000000 0 0x00100000>, /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */ <0x02000000 0 0x58000000 0x58000000 0 0x08000000>; /* DMA ranges */ dma-ranges = /* 128MiB at 0x00000000-0x07ffffff */ <0x02000000 0 0x00000000 0x00000000 0 0x08000000>, /* 64MiB at 0x00000000-0x03ffffff */ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>, /* 64MiB at 0x00000000-0x03ffffff */ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>; /* * This PCI host bridge variant has a cascaded interrupt * controller embedded in the host bridge. */ pci_intc: interrupt-controller { interrupt-parent = <&intcon>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #address-cells = <0>; #interrupt-cells = <1>; }; }; ethernet@60000000 { compatible = "cortina,gemini-ethernet"; reg = <0x60000000 0x4000>, /* Global registers, queue */ <0x60004000 0x2000>, /* V-bit */ <0x60006000 0x2000>; /* A-bit */ pinctrl-names = "default"; pinctrl-0 = <&gmii_default_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <1>; ranges; gmac0: ethernet-port@0 { compatible = "cortina,gemini-ethernet-port"; reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */ <0x6000a000 0x2000>; /* Port 0 GMAC */ interrupt-parent = <&intcon>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon GEMINI_RESET_GMAC0>; clocks = <&syscon GEMINI_CLK_GATE_GMAC0>; clock-names = "PCLK"; }; gmac1: ethernet-port@1 { compatible = "cortina,gemini-ethernet-port"; reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */ <0x6000e000 0x2000>; /* Port 1 GMAC */ interrupt-parent = <&intcon>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon GEMINI_RESET_GMAC1>; clocks = <&syscon GEMINI_CLK_GATE_GMAC1>; clock-names = "PCLK"; }; }; ide@63000000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63000000 0x1000>; interrupts = <4 IRQ_TYPE_EDGE_RISING>; resets = <&syscon GEMINI_RESET_IDE>; clocks = <&syscon GEMINI_CLK_GATE_IDE>; clock-names = "PCLK"; sata = <&sata>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; ide@63400000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63400000 0x1000>; interrupts = <5 IRQ_TYPE_EDGE_RISING>; resets = <&syscon GEMINI_RESET_IDE>; clocks = <&syscon GEMINI_CLK_GATE_IDE>; clock-names = "PCLK"; sata = <&sata>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; dma-controller@67000000 { compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell"; /* Faraday Technology FTDMAC020 variant */ arm,primecell-periphid = <0x0003b080>; reg = <0x67000000 0x1000>; interrupts = <9 IRQ_TYPE_EDGE_RISING>; resets = <&syscon GEMINI_RESET_DMAC>; clocks = <&syscon GEMINI_CLK_AHB>; clock-names = "apb_pclk"; /* Bus interface AHB1 (AHB0) is totally tilted */ lli-bus-interface-ahb2; mem-bus-interface-ahb2; memcpy-burst-size = <256>; memcpy-bus-width = <32>; #dma-cells = <2>; }; display-controller@6a000000 { compatible = "cortina,gemini-tvc", "faraday,tve200"; reg = <0x6a000000 0x1000>; interrupts = <13 IRQ_TYPE_EDGE_RISING>; resets = <&syscon GEMINI_RESET_TVC>; clocks = <&syscon GEMINI_CLK_GATE_TVC>, <&syscon GEMINI_CLK_TVC>; clock-names = "PCLK", "TVE"; pinctrl-names = "default"; pinctrl-0 = <&tvc_default_pins>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; usb@68000000 { compatible = "cortina,gemini-usb", "faraday,fotg210"; reg = <0x68000000 0x1000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon GEMINI_RESET_USB0>; clocks = <&syscon GEMINI_CLK_GATE_USB0>; clock-names = "PCLK"; /* * This will claim pins for USB0 and USB1 at the same * time as they are using some common pins. If you for * some reason have a system using USB1 at 96000000 but * NOT using USB0 at 68000000 you wll have to add the * usb_default_pins to the USB controller at 96000000 * in your .dts for the board. */ pinctrl-names = "default"; pinctrl-0 = <&usb_default_pins>; syscon = <&syscon>; status = "disabled"; }; usb@69000000 { compatible = "cortina,gemini-usb", "faraday,fotg210"; reg = <0x69000000 0x1000>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon GEMINI_RESET_USB1>; clocks = <&syscon GEMINI_CLK_GATE_USB1>; clock-names = "PCLK"; syscon = <&syscon>; status = "disabled"; }; }; }; |