Loading...
Qualcomm APQ8064 SATA PHY Controller ------------------------------------ SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers. Each SATA PHY controller should have its own node. Required properties: - compatible: compatible list, contains "qcom,apq8064-sata-phy". - reg: offset and length of the SATA PHY register set; - #phy-cells: must be zero - clocks: a list of phandles and clock-specifier pairs, one for each entry in clock-names. - clock-names: must be "cfg" for phy config clock. Example: sata_phy: sata-phy@1b400000 { compatible = "qcom,apq8064-sata-phy"; reg = <0x1b400000 0x200>; clocks = <&gcc SATA_PHY_CFG_CLK>; clock-names = "cfg"; #phy-cells = <0>; }; |