Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 | # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- $id: http://devicetree.org/schemas/spi/spi-rockchip.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Rockchip SPI Controller description: The Rockchip SPI controller is used to interface with various devices such as flash and display controllers using the SPI communication interface. allOf: - $ref: "spi-controller.yaml#" maintainers: - Heiko Stuebner <heiko@sntech.de> # Everything else is described in the common file properties: compatible: oneOf: - const: rockchip,rk3036-spi - const: rockchip,rk3066-spi - const: rockchip,rk3228-spi - const: rockchip,rv1108-spi - items: - enum: - rockchip,px30-spi - rockchip,rk3188-spi - rockchip,rk3288-spi - rockchip,rk3308-spi - rockchip,rk3328-spi - rockchip,rk3368-spi - rockchip,rk3399-spi - rockchip,rk3568-spi - rockchip,rv1126-spi - const: rockchip,rk3066-spi reg: maxItems: 1 interrupts: maxItems: 1 clocks: items: - description: transfer-clock - description: peripheral clock clock-names: items: - const: spiclk - const: apb_pclk dmas: items: - description: TX DMA Channel - description: RX DMA Channel dma-names: items: - const: tx - const: rx rx-sample-delay-ns: default: 0 description: Nano seconds to delay after the SCLK edge before sampling Rx data (may need to be fine tuned for high capacitance lines). If not specified 0 will be used. pinctrl-names: minItems: 1 items: - const: default - const: sleep description: Names for the pin configuration(s); may be "default" or "sleep", where the "sleep" configuration may describe the state the pins should be in during system suspend. required: - compatible - reg - interrupts - clocks - clock-names unevaluatedProperties: false examples: - | #include <dt-bindings/clock/rk3188-cru-common.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> spi0: spi@ff110000 { compatible = "rockchip,rk3066-spi"; reg = <0xff110000 0x1000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; clock-names = "spiclk", "apb_pclk"; dmas = <&pdma1 11>, <&pdma1 12>; dma-names = "tx", "rx"; pinctrl-0 = <&spi1_pins>; pinctrl-1 = <&spi1_sleep>; pinctrl-names = "default", "sleep"; rx-sample-delay-ns = <10>; #address-cells = <1>; #size-cells = <0>; }; |