Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 | // SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2016 Eckelmann AG. * Copyright (C) 2013 Freescale Semiconductor, Inc. */ /dts-v1/; #include <dt-bindings/gpio/gpio.h> #include "imx6dl.dtsi" / { model = "Eckelmann CI 4X10 Board"; compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl"; chosen { stdout-path = &uart3; }; memory@10000000 { device_type = "memory"; reg = <0x10000000 0x40000000>; }; rmii_clk: clock-rmii { /* This clock is provided by the phy (KSZ8091RNB) */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; }; reg_usb_h1_vbus: regulator-usb-h1-vbus { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>; compatible = "regulator-fixed"; regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; enable-active-high; }; siox { compatible = "eckelmann,siox-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_siox>; din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; }; }; &can1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; status = "okay"; }; &can2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2>; status = "okay"; }; &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; status = "okay"; flash@0 { compatible = "everspin,mr25h256"; reg = <0>; spi-max-frequency = <15000000>; }; }; &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; status = "okay"; tpm@0 { compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; reg = <0>; spi-max-frequency = <10000000>; }; }; &gpio2 { gpio-line-names = "buzzer", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", ""; }; &gpio4 { gpio-line-names = "", "", "", "", "", "", "", "in2", "prio2", "prio1", "aux", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", ""; }; &gpio6 { gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "in1", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", ""; }; &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; temperature-sensor@49 { compatible = "ad,ad7414"; reg = <0x49>; }; rtc@51 { compatible = "nxp,pcf2127"; reg = <0x51>; }; }; &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; pinctrl_hog: hog { fsl,pins = < MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00000018 /* buzzer */ MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x00000018 /* OUT_1 */ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x00000018 /* OUT_2 */ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x00000018 /* OUT_3 */ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x00000000 /* In1 */ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x00000000 /* In2 */ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x00000018 /* unused watchdog pin */ MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x00000018 /* unused watchdog pin */ >; }; pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x000100a0 MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x000100a0 MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x000100a0 MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000100a0 >; }; pinctrl_ecspi2: ecspi2grp { fsl,pins = < MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x000100b1 MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x000100b1 MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x000100b1 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000100b1 >; }; pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x0001b098 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x0001b098 MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098 MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098 MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x0001b0b0 MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x0001b0b0 MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x0001b0b0 MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x0001b0b0 MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x00000018 >; }; pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x0001b020 MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x0001b0b0 >; }; pinctrl_flexcan2: flexcan2grp { fsl,pins = < MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x0001b020 MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x0001b0b0 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < /* without SION i2c doesn't detect bus busy */ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b820 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b820 >; }; pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x00000018 >; }; pinctrl_reg_usb_h1_vbus: reg_usb_h1_vbusgrp { fsl,pins = < MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0001b0b0 >; }; pinctrl_siox: sioxgrp { fsl,pins = < MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x0001b010 /* DIN */ MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b010 /* DOUT */ MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0001b010 /* DCLK */ MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x0001b010 /* DLD */ >; }; pinctrl_uart1_dte: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x0001b010 MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x0001b010 MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x0001b010 MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x0001b010 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0001b010 /* DCD */ MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x0001b010 /* DTR */ MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x0001b010 /* DSR */ >; }; pinctrl_uart2_dte: uart2grp { fsl,pins = < MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x0001b010 MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x0001b010 MX6QDL_PAD_EIM_D28__UART2_RTS_B 0x0001b010 MX6QDL_PAD_EIM_D29__UART2_CTS_B 0x0001b010 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b010 /* DCD */ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b010 /* DTR */ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x0001b010 /* DSR */ >; }; pinctrl_uart3_dce: uart3grp { fsl,pins = < MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x0001b010 MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x0001b010 >; }; pinctrl_uart4_dce: uart4grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x0001b010 MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x0001b010 MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x0001b010 >; }; pinctrl_uart5_dce: uart5grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x0001b010 MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x0001b010 MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x0001b010 /* RTS */ >; }; pinctrl_usbh1: usbh1grp { fsl,pins = < MX6QDL_PAD_EIM_D30__USB_H1_OC 0x0001b0b0 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x00017059 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x00010059 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x00017059 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x00017059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x00017059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x00017059 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x00017059 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x00017059 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x00017059 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x00017059 >; }; }; &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; phy-handle = <&phy>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>, <&clks IMX6QDL_CLK_ENET_REF>; clock-names = "ipg", "ahb", "ptp", "enet_out"; status = "okay"; mdio { #address-cells = <1>; #size-cells = <0>; phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; }; }; }; &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>; status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_dte>; uart-has-rtscts; fsl,dte-mode; dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2_dte>; uart-has-rtscts; fsl,dte-mode; dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_dce>; status = "okay"; }; &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4_dce>; rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5_dce>; rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; vbus-supply = <®_usb_h1_vbus>; status = "okay"; }; &usbotg { dr_mode = "peripheral"; status = "okay"; }; &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <8>; non-removable; status = "okay"; }; |