/*
 *  Copyright (c) 2013 Andrew Duggan <aduggan@synaptics.com>
 *  Copyright (c) 2013 Synaptics Incorporated
 *  Copyright (c) 2014 Benjamin Tissoires <benjamin.tissoires@gmail.com>
 *  Copyright (c) 2014 Red Hat, Inc
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option)
 * any later version.
 */

#include <linux/kernel.h>
#include <linux/hid.h>
#include <linux/input.h>
#include <linux/input/mt.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/sched.h>
#include "hid-ids.h"

#define RMI_MOUSE_REPORT_ID		0x01 /* Mouse emulation Report */
#define RMI_WRITE_REPORT_ID		0x09 /* Output Report */
#define RMI_READ_ADDR_REPORT_ID		0x0a /* Output Report */
#define RMI_READ_DATA_REPORT_ID		0x0b /* Input Report */
#define RMI_ATTN_REPORT_ID		0x0c /* Input Report */
#define RMI_SET_RMI_MODE_REPORT_ID	0x0f /* Feature Report */

/* flags */
#define RMI_READ_REQUEST_PENDING	0
#define RMI_READ_DATA_PENDING		1
#define RMI_STARTED			2

#define RMI_SLEEP_NORMAL		0x0
#define RMI_SLEEP_DEEP_SLEEP		0x1

/* device flags */
#define RMI_DEVICE			BIT(0)
#define RMI_DEVICE_HAS_PHYS_BUTTONS	BIT(1)

/*
 * retrieve the ctrl registers
 * the ctrl register has a size of 20 but a fw bug split it into 16 + 4,
 * and there is no way to know if the first 20 bytes are here or not.
 * We use only the first 12 bytes, so get only them.
 */
#define RMI_F11_CTRL_REG_COUNT		12

enum rmi_mode_type {
	RMI_MODE_OFF			= 0,
	RMI_MODE_ATTN_REPORTS		= 1,
	RMI_MODE_NO_PACKED_ATTN_REPORTS	= 2,
};

struct rmi_function {
	unsigned page;			/* page of the function */
	u16 query_base_addr;		/* base address for queries */
	u16 command_base_addr;		/* base address for commands */
	u16 control_base_addr;		/* base address for controls */
	u16 data_base_addr;		/* base address for datas */
	unsigned int interrupt_base;	/* cross-function interrupt number
					 * (uniq in the device)*/
	unsigned int interrupt_count;	/* number of interrupts */
	unsigned int report_size;	/* size of a report */
	unsigned long irq_mask;		/* mask of the interrupts
					 * (to be applied against ATTN IRQ) */
};

/**
 * struct rmi_data - stores information for hid communication
 *
 * @page_mutex: Locks current page to avoid changing pages in unexpected ways.
 * @page: Keeps track of the current virtual page
 *
 * @wait: Used for waiting for read data
 *
 * @writeReport: output buffer when writing RMI registers
 * @readReport: input buffer when reading RMI registers
 *
 * @input_report_size: size of an input report (advertised by HID)
 * @output_report_size: size of an output report (advertised by HID)
 *
 * @flags: flags for the current device (started, reading, etc...)
 *
 * @f11: placeholder of internal RMI function F11 description
 * @f30: placeholder of internal RMI function F30 description
 *
 * @max_fingers: maximum finger count reported by the device
 * @max_x: maximum x value reported by the device
 * @max_y: maximum y value reported by the device
 *
 * @gpio_led_count: count of GPIOs + LEDs reported by F30
 * @button_count: actual physical buttons count
 * @button_mask: button mask used to decode GPIO ATTN reports
 * @button_state_mask: pull state of the buttons
 *
 * @input: pointer to the kernel input device
 *
 * @reset_work: worker which will be called in case of a mouse report
 * @hdev: pointer to the struct hid_device
 */
struct rmi_data {
	struct mutex page_mutex;
	int page;

	wait_queue_head_t wait;

	u8 *writeReport;
	u8 *readReport;

	u32 input_report_size;
	u32 output_report_size;

	unsigned long flags;

	struct rmi_function f01;
	struct rmi_function f11;
	struct rmi_function f30;

	unsigned int max_fingers;
	unsigned int max_x;
	unsigned int max_y;
	unsigned int x_size_mm;
	unsigned int y_size_mm;
	bool read_f11_ctrl_regs;
	u8 f11_ctrl_regs[RMI_F11_CTRL_REG_COUNT];

	unsigned int gpio_led_count;
	unsigned int button_count;
	unsigned long button_mask;
	unsigned long button_state_mask;

	struct input_dev *input;

	struct work_struct reset_work;
	struct hid_device *hdev;

	unsigned long device_flags;
	unsigned long firmware_id;

	u8 f01_ctrl0;
	u8 interrupt_enable_mask;
	bool restore_interrupt_mask;
};

#define RMI_PAGE(addr) (((addr) >> 8) & 0xff)

static int rmi_write_report(struct hid_device *hdev, u8 *report, int len);

/**
 * rmi_set_page - Set RMI page
 * @hdev: The pointer to the hid_device struct
 * @page: The new page address.
 *
 * RMI devices have 16-bit addressing, but some of the physical
 * implementations (like SMBus) only have 8-bit addressing. So RMI implements
 * a page address at 0xff of every page so we can reliable page addresses
 * every 256 registers.
 *
 * The page_mutex lock must be held when this function is entered.
 *
 * Returns zero on success, non-zero on failure.
 */
static int rmi_set_page(struct hid_device *hdev, u8 page)
{
	struct rmi_data *data = hid_get_drvdata(hdev);
	int retval;

	data->writeReport[0] = RMI_WRITE_REPORT_ID;
	data->writeReport[1] = 1;
	data->writeReport[2] = 0xFF;
	data->writeReport[4] = page;

	retval = rmi_write_report(hdev, data->writeReport,
			data->output_report_size);
	if (retval != data->output_report_size) {
		dev_err(&hdev->dev,
			"%s: set page failed: %d.", __func__, retval);
		return retval;
	}

	data->page = page;
	return 0;
}

static int rmi_set_mode(struct hid_device *hdev, u8 mode)
{
	int ret;
	const u8 txbuf[2] = {RMI_SET_RMI_MODE_REPORT_ID, mode};
	u8 *buf;

	buf = kmemdup(txbuf, sizeof(txbuf), GFP_KERNEL);
	if (!buf)
		return -ENOMEM;

	ret = hid_hw_raw_request(hdev, RMI_SET_RMI_MODE_REPORT_ID, buf,
			sizeof(txbuf), HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
	kfree(buf);
	if (ret < 0) {
		dev_err(&hdev->dev, "unable to set rmi mode to %d (%d)\n", mode,
			ret);
		return ret;
	}

	return 0;
}

static int rmi_write_report(struct hid_device *hdev, u8 *report, int len)
{
	int ret;

	ret = hid_hw_output_report(hdev, (void *)report, len);
	if (ret < 0) {
		dev_err(&hdev->dev, "failed to write hid report (%d)\n", ret);
		return ret;
	}

	return ret;
}

static int rmi_read_block(struct hid_device *hdev, u16 addr, void *buf,
		const int len)
{
	struct rmi_data *data = hid_get_drvdata(hdev);
	int ret;
	int bytes_read;
	int bytes_needed;
	int retries;
	int read_input_count;

	mutex_lock(&data->page_mutex);

	if (RMI_PAGE(addr) != data->page) {
		ret = rmi_set_page(hdev, RMI_PAGE(addr));
		if (ret < 0)
			goto exit;
	}

	for (retries = 5; retries > 0; retries--) {
		data->writeReport[0] = RMI_READ_ADDR_REPORT_ID;
		data->writeReport[1] = 0; /* old 1 byte read count */
		data->writeReport[2] = addr & 0xFF;
		data->writeReport[3] = (addr >> 8) & 0xFF;
		data->writeReport[4] = len  & 0xFF;
		data->writeReport[5] = (len >> 8) & 0xFF;

		set_bit(RMI_READ_REQUEST_PENDING, &data->flags);

		ret = rmi_write_report(hdev, data->writeReport,
						data->output_report_size);
		if (ret != data->output_report_size) {
			clear_bit(RMI_READ_REQUEST_PENDING, &data->flags);
			dev_err(&hdev->dev,
				"failed to write request output report (%d)\n",
				ret);
			goto exit;
		}

		bytes_read = 0;
		bytes_needed = len;
		while (bytes_read < len) {
			if (!wait_event_timeout(data->wait,
				test_bit(RMI_READ_DATA_PENDING, &data->flags),
					msecs_to_jiffies(1000))) {
				hid_warn(hdev, "%s: timeout elapsed\n",
					 __func__);
				ret = -EAGAIN;
				break;
			}

			read_input_count = data->readReport[1];
			memcpy(buf + bytes_read, &data->readReport[2],
				read_input_count < bytes_needed ?
					read_input_count : bytes_needed);

			bytes_read += read_input_count;
			bytes_needed -= read_input_count;
			clear_bit(RMI_READ_DATA_PENDING, &data->flags);
		}

		if (ret >= 0) {
			ret = 0;
			break;
		}
	}

exit:
	clear_bit(RMI_READ_REQUEST_PENDING, &data->flags);
	mutex_unlock(&data->page_mutex);
	return ret;
}

static inline int rmi_read(struct hid_device *hdev, u16 addr, void *buf)
{
	return rmi_read_block(hdev, addr, buf, 1);
}

static int rmi_write_block(struct hid_device *hdev, u16 addr, void *buf,
		const int len)
{
	struct rmi_data *data = hid_get_drvdata(hdev);
	int ret;

	mutex_lock(&data->page_mutex);

	if (RMI_PAGE(addr) != data->page) {
		ret = rmi_set_page(hdev, RMI_PAGE(addr));
		if (ret < 0)
			goto exit;
	}

	data->writeReport[0] = RMI_WRITE_REPORT_ID;
	data->writeReport[1] = len;
	data->writeReport[2] = addr & 0xFF;
	data->writeReport[3] = (addr >> 8) & 0xFF;
	memcpy(&data->writeReport[4], buf, len);

	ret = rmi_write_report(hdev, data->writeReport,
					data->output_report_size);
	if (ret < 0) {
		dev_err(&hdev->dev,
			"failed to write request output report (%d)\n",
			ret);
		goto exit;
	}
	ret = 0;

exit:
	mutex_unlock(&data->page_mutex);
	return ret;
}

static inline int rmi_write(struct hid_device *hdev, u16 addr, void *buf)
{
	return rmi_write_block(hdev, addr, buf, 1);
}

static void rmi_f11_process_touch(struct rmi_data *hdata, int slot,
		u8 finger_state, u8 *touch_data)
{
	int x, y, wx, wy;
	int wide, major, minor;
	int z;

	input_mt_slot(hdata->input, slot);
	input_mt_report_slot_state(hdata->input, MT_TOOL_FINGER,
			finger_state == 0x01);
	if (finger_state == 0x01) {
		x = (touch_data[0] << 4) | (touch_data[2] & 0x0F);
		y = (touch_data[1] << 4) | (touch_data[2] >> 4);
		wx = touch_data[3] & 0x0F;
		wy = touch_data[3] >> 4;
		wide = (wx > wy);
		major = max(wx, wy);
		minor = min(wx, wy);
		z = touch_data[4];

		/* y is inverted */
		y = hdata->max_y - y;

		input_event(hdata->input, EV_ABS, ABS_MT_POSITION_X, x);
		input_event(hdata->input, EV_ABS, ABS_MT_POSITION_Y, y);
		input_event(hdata->input, EV_ABS, ABS_MT_ORIENTATION, wide);
		input_event(hdata->input, EV_ABS, ABS_MT_PRESSURE, z);
		input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
		input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
	}
}

static int rmi_reset_attn_mode(struct hid_device *hdev)
{
	struct rmi_data *data = hid_get_drvdata(hdev);
	int ret;

	ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
	if (ret)
		return ret;

	if (data->restore_interrupt_mask) {
		ret = rmi_write(hdev, data->f01.control_base_addr + 1,
				&data->interrupt_enable_mask);
		if (ret) {
			hid_err(hdev, "can not write F01 control register\n");
			return ret;
		}
	}

	return 0;
}

static void rmi_reset_work(struct work_struct *work)
{
	struct rmi_data *hdata = container_of(work, struct rmi_data,
						reset_work);

	/* switch the device to RMI if we receive a generic mouse report */
	rmi_reset_attn_mode(hdata->hdev);
}

static inline int rmi_schedule_reset(struct hid_device *hdev)
{
	struct rmi_data *hdata = hid_get_drvdata(hdev);
	return schedule_work(&hdata->reset_work);
}

static int rmi_f11_input_event(struct hid_device *hdev, u8 irq, u8 *data,
		int size)
{
	struct rmi_data *hdata = hid_get_drvdata(hdev);
	int offset;
	int i;

	if (!(irq & hdata->f11.irq_mask) || size <= 0)
		return 0;

	offset = (hdata->max_fingers >> 2) + 1;
	for (i = 0; i < hdata->max_fingers; i++) {
		int fs_byte_position = i >> 2;
		int fs_bit_position = (i & 0x3) << 1;
		int finger_state = (data[fs_byte_position] >> fs_bit_position) &
					0x03;
		int position = offset + 5 * i;

		if (position + 5 > size) {
			/* partial report, go on with what we received */
			printk_once(KERN_WARNING
				"%s %s: Detected incomplete finger report. Finger reports may occasionally get dropped on this platform.\n",
				 dev_driver_string(&hdev->dev),
				 dev_name(&hdev->dev));
			hid_dbg(hdev, "Incomplete finger report\n");
			break;
		}

		rmi_f11_process_touch(hdata, i, finger_state, &data[position]);
	}
	input_mt_sync_frame(hdata->input);
	input_sync(hdata->input);
	return hdata->f11.report_size;
}

static int rmi_f30_input_event(struct hid_device *hdev, u8 irq, u8 *data,
		int size)
{
	struct rmi_data *hdata = hid_get_drvdata(hdev);
	int i;
	int button = 0;
	bool value;

	if (!(irq & hdata->f30.irq_mask))
		return 0;

	if (size < (int)hdata->f30.report_size) {
		hid_warn(hdev, "Click Button pressed, but the click data is missing\n");
		return 0;
	}

	for (i = 0; i < hdata->gpio_led_count; i++) {
		if (test_bit(i, &hdata->button_mask)) {
			value = (data[i / 8] >> (i & 0x07)) & BIT(0);
			if (test_bit(i, &hdata->button_state_mask))
				value = !value;
			input_event(hdata->input, EV_KEY, BTN_LEFT + button++,
					value);
		}
	}
	return hdata->f30.report_size;
}

static int rmi_input_event(struct hid_device *hdev, u8 *data, int size)
{
	struct rmi_data *hdata = hid_get_drvdata(hdev);
	unsigned long irq_mask = 0;
	unsigned index = 2;

	if (!(test_bit(RMI_STARTED, &hdata->flags)))
		return 0;

	irq_mask |= hdata->f11.irq_mask;
	irq_mask |= hdata->f30.irq_mask;

	if (data[1] & ~irq_mask)
		hid_dbg(hdev, "unknown intr source:%02lx %s:%d\n",
			data[1] & ~irq_mask, __FILE__, __LINE__);

	if (hdata->f11.interrupt_base < hdata->f30.interrupt_base) {
		index += rmi_f11_input_event(hdev, data[1], &data[index],
				size - index);
		index += rmi_f30_input_event(hdev, data[1], &data[index],
				size - index);
	} else {
		index += rmi_f30_input_event(hdev, data[1], &data[index],
				size - index);
		index += rmi_f11_input_event(hdev, data[1], &data[index],
				size - index);
	}

	return 1;
}

static int rmi_read_data_event(struct hid_device *hdev, u8 *data, int size)
{
	struct rmi_data *hdata = hid_get_drvdata(hdev);

	if (!test_bit(RMI_READ_REQUEST_PENDING, &hdata->flags)) {
		hid_dbg(hdev, "no read request pending\n");
		return 0;
	}

	memcpy(hdata->readReport, data, size < hdata->input_report_size ?
			size : hdata->input_report_size);
	set_bit(RMI_READ_DATA_PENDING, &hdata->flags);
	wake_up(&hdata->wait);

	return 1;
}

static int rmi_check_sanity(struct hid_device *hdev, u8 *data, int size)
{
	int valid_size = size;
	/*
	 * On the Dell XPS 13 9333, the bus sometimes get confused and fills
	 * the report with a sentinel value "ff". Synaptics told us that such
	 * behavior does not comes from the touchpad itself, so we filter out
	 * such reports here.
	 */

	while ((data[valid_size - 1] == 0xff) && valid_size > 0)
		valid_size--;

	return valid_size;
}

static int rmi_raw_event(struct hid_device *hdev,
		struct hid_report *report, u8 *data, int size)
{
	size = rmi_check_sanity(hdev, data, size);
	if (size < 2)
		return 0;

	switch (data[0]) {
	case RMI_READ_DATA_REPORT_ID:
		return rmi_read_data_event(hdev, data, size);
	case RMI_ATTN_REPORT_ID:
		return rmi_input_event(hdev, data, size);
	default:
		return 1;
	}

	return 0;
}

static int rmi_event(struct hid_device *hdev, struct hid_field *field,
			struct hid_usage *usage, __s32 value)
{
	struct rmi_data *data = hid_get_drvdata(hdev);

	if ((data->device_flags & RMI_DEVICE) &&
	    (field->application == HID_GD_POINTER ||
	    field->application == HID_GD_MOUSE)) {
		if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) {
			if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON)
				return 0;

			if ((usage->hid == HID_GD_X || usage->hid == HID_GD_Y)
			    && !value)
				return 1;
		}

		rmi_schedule_reset(hdev);
		return 1;
	}

	return 0;
}

#ifdef CONFIG_PM
static int rmi_set_sleep_mode(struct hid_device *hdev, int sleep_mode)
{
	struct rmi_data *data = hid_get_drvdata(hdev);
	int ret;
	u8 f01_ctrl0;

	f01_ctrl0 = (data->f01_ctrl0 & ~0x3) | sleep_mode;

	ret = rmi_write(hdev, data->f01.control_base_addr,
			&f01_ctrl0);
	if (ret) {
		hid_err(hdev, "can not write sleep mode\n");
		return ret;
	}

	return 0;
}

static int rmi_suspend(struct hid_device *hdev, pm_message_t message)
{
	struct rmi_data *data = hid_get_drvdata(hdev);
	int ret;
	u8 buf[RMI_F11_CTRL_REG_COUNT];

	if (!(data->device_flags & RMI_DEVICE))
		return 0;

	ret = rmi_read_block(hdev, data->f11.control_base_addr, buf,
				RMI_F11_CTRL_REG_COUNT);
	if (ret)
		hid_warn(hdev, "can not read F11 control registers\n");
	else
		memcpy(data->f11_ctrl_regs, buf, RMI_F11_CTRL_REG_COUNT);


	if (!device_may_wakeup(hdev->dev.parent))
		return rmi_set_sleep_mode(hdev, RMI_SLEEP_DEEP_SLEEP);

	return 0;
}

static int rmi_post_reset(struct hid_device *hdev)
{
	struct rmi_data *data = hid_get_drvdata(hdev);
	int ret;

	if (!(data->device_flags & RMI_DEVICE))
		return 0;

	ret = rmi_reset_attn_mode(hdev);
	if (ret) {
		hid_err(hdev, "can not set rmi mode\n");
		return ret;
	}

	if (data->read_f11_ctrl_regs) {
		ret = rmi_write_block(hdev, data->f11.control_base_addr,
				data->f11_ctrl_regs, RMI_F11_CTRL_REG_COUNT);
		if (ret)
			hid_warn(hdev,
				"can not write F11 control registers after reset\n");
	}

	if (!device_may_wakeup(hdev->dev.parent)) {
		ret = rmi_set_sleep_mode(hdev, RMI_SLEEP_NORMAL);
		if (ret) {
			hid_err(hdev, "can not write sleep mode\n");
			return ret;
		}
	}

	return ret;
}

static int rmi_post_resume(struct hid_device *hdev)
{
	struct rmi_data *data = hid_get_drvdata(hdev);

	if (!(data->device_flags & RMI_DEVICE))
		return 0;

	return rmi_reset_attn_mode(hdev);
}
#endif /* CONFIG_PM */

#define RMI4_MAX_PAGE 0xff
#define RMI4_PAGE_SIZE 0x0100

#define PDT_START_SCAN_LOCATION 0x00e9
#define PDT_END_SCAN_LOCATION	0x0005
#define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff)

struct pdt_entry {
	u8 query_base_addr:8;
	u8 command_base_addr:8;
	u8 control_base_addr:8;
	u8 data_base_addr:8;
	u8 interrupt_source_count:3;
	u8 bits3and4:2;
	u8 function_version:2;
	u8 bit7:1;
	u8 function_number:8;
} __attribute__((__packed__));

static inline unsigned long rmi_gen_mask(unsigned irq_base, unsigned irq_count)
{
	return GENMASK(irq_count + irq_base - 1, irq_base);
}

static void rmi_register_function(struct rmi_data *data,
	struct pdt_entry *pdt_entry, int page, unsigned interrupt_count)
{
	struct rmi_function *f = NULL;
	u16 page_base = page << 8;

	switch (pdt_entry->function_number) {
	case 0x01:
		f = &data->f01;
		break;
	case 0x11:
		f = &data->f11;
		break;
	case 0x30:
		f = &data->f30;
		break;
	}

	if (f) {
		f->page = page;
		f->query_base_addr = page_base | pdt_entry->query_base_addr;
		f->command_base_addr = page_base | pdt_entry->command_base_addr;
		f->control_base_addr = page_base | pdt_entry->control_base_addr;
		f->data_base_addr = page_base | pdt_entry->data_base_addr;
		f->interrupt_base = interrupt_count;
		f->interrupt_count = pdt_entry->interrupt_source_count;
		f->irq_mask = rmi_gen_mask(f->interrupt_base,
						f->interrupt_count);
		data->interrupt_enable_mask |= f->irq_mask;
	}
}

static int rmi_scan_pdt(struct hid_device *hdev)
{
	struct rmi_data *data = hid_get_drvdata(hdev);
	struct pdt_entry entry;
	int page;
	bool page_has_function;
	int i;
	int retval;
	int interrupt = 0;
	u16 page_start, pdt_start , pdt_end;

	hid_info(hdev, "Scanning PDT...\n");

	for (page = 0; (page <= RMI4_MAX_PAGE); page++) {
		page_start = RMI4_PAGE_SIZE * page;
		pdt_start = page_start + PDT_START_SCAN_LOCATION;
		pdt_end = page_start + PDT_END_SCAN_LOCATION;

		page_has_function = false;
		for (i = pdt_start; i >= pdt_end; i -= sizeof(entry)) {
			retval = rmi_read_block(hdev, i, &entry, sizeof(entry));
			if (retval) {
				hid_err(hdev,
					"Read of PDT entry at %#06x failed.\n",
					i);
				goto error_exit;
			}

			if (RMI4_END_OF_PDT(entry.function_number))
				break;

			page_has_function = true;

			hid_info(hdev, "Found F%02X on page %#04x\n",
					entry.function_number, page);

			rmi_register_function(data, &entry, page, interrupt);
			interrupt += entry.interrupt_source_count;
		}

		if (!page_has_function)
			break;
	}

	hid_info(hdev, "%s: Done with PDT scan.\n", __func__);
	retval = 0;

error_exit:
	return retval;
}

#define RMI_DEVICE_F01_BASIC_QUERY_LEN	11

static int rmi_populate_f01(struct hid_device *hdev)
{
	struct rmi_data *data = hid_get_drvdata(hdev);
	u8 basic_queries[RMI_DEVICE_F01_BASIC_QUERY_LEN];
	u8 info[3];
	int ret;
	bool has_query42;
	bool has_lts;
	bool has_sensor_id;
	bool has_ds4_queries = false;
	bool has_build_id_query = false;
	bool has_package_id_query = false;
	u16 query_offset = data->f01.query_base_addr;
	u16 prod_info_addr;
	u8 ds4_query_len;

	ret = rmi_read_block(hdev, query_offset, basic_queries,
				RMI_DEVICE_F01_BASIC_QUERY_LEN);
	if (ret) {
		hid_err(hdev, "Can not read basic queries from Function 0x1.\n");
		return ret;
	}

	has_lts = !!(basic_queries[0] & BIT(2));
	has_sensor_id = !!(basic_queries[1] & BIT(3));
	has_query42 = !!(basic_queries[1] & BIT(7));

	query_offset += 11;
	prod_info_addr = query_offset + 6;
	query_offset += 10;

	if (has_lts)
		query_offset += 20;

	if (has_sensor_id)
		query_offset++;

	if (has_query42) {
		ret = rmi_read(hdev, query_offset, info);
		if (ret) {
			hid_err(hdev, "Can not read query42.\n");
			return ret;
		}
		has_ds4_queries = !!(info[0] & BIT(0));
		query_offset++;
	}

	if (has_ds4_queries) {
		ret = rmi_read(hdev, query_offset, &ds4_query_len);
		if (ret) {
			hid_err(hdev, "Can not read DS4 Query length.\n");
			return ret;
		}
		query_offset++;

		if (ds4_query_len > 0) {
			ret = rmi_read(hdev, query_offset, info);
			if (ret) {
				hid_err(hdev, "Can not read DS4 query.\n");
				return ret;
			}

			has_package_id_query = !!(info[0] & BIT(0));
			has_build_id_query = !!(info[0] & BIT(1));
		}
	}

	if (has_package_id_query)
		prod_info_addr++;

	if (has_build_id_query) {
		ret = rmi_read_block(hdev, prod_info_addr, info, 3);
		if (ret) {
			hid_err(hdev, "Can not read product info.\n");
			return ret;
		}

		data->firmware_id = info[1] << 8 | info[0];
		data->firmware_id += info[2] * 65536;
	}

	ret = rmi_read_block(hdev, data->f01.control_base_addr, info,
				2);

	if (ret) {
		hid_err(hdev, "can not read f01 ctrl registers\n");
		return ret;
	}

	data->f01_ctrl0 = info[0];

	if (!info[1]) {
		/*
		 * Do to a firmware bug in some touchpads the F01 interrupt
		 * enable control register will be cleared on reset.
		 * This will stop the touchpad from reporting data, so
		 * if F01 CTRL1 is 0 then we need to explicitly enable
		 * interrupts for the functions we want data for.
		 */
		data->restore_interrupt_mask = true;

		ret = rmi_write(hdev, data->f01.control_base_addr + 1,
				&data->interrupt_enable_mask);
		if (ret) {
			hid_err(hdev, "can not write to control reg 1: %d.\n",
				ret);
			return ret;
		}
	}

	return 0;
}

static int rmi_populate_f11(struct hid_device *hdev)
{
	struct rmi_data *data = hid_get_drvdata(hdev);
	u8 buf[20];
	int ret;
	bool has_query9;
	bool has_query10 = false;
	bool has_query11;
	bool has_query12;
	bool has_query27;
	bool has_query28;
	bool has_query36 = false;
	bool has_physical_props;
	bool has_gestures;
	bool has_rel;
	bool has_data40 = false;
	bool has_dribble = false;
	bool has_palm_detect = false;
	unsigned x_size, y_size;
	u16 query_offset;

	if (!data->f11.query_base_addr) {
		hid_err(hdev, "No 2D sensor found, giving up.\n");
		return -ENODEV;
	}

	/* query 0 contains some useful information */
	ret = rmi_read(hdev, data->f11.query_base_addr, buf);
	if (ret) {
		hid_err(hdev, "can not get query 0: %d.\n", ret);
		return ret;
	}
	has_query9 = !!(buf[0] & BIT(3));
	has_query11 = !!(buf[0] & BIT(4));
	has_query12 = !!(buf[0] & BIT(5));
	has_query27 = !!(buf[0] & BIT(6));
	has_query28 = !!(buf[0] & BIT(7));

	/* query 1 to get the max number of fingers */
	ret = rmi_read(hdev, data->f11.query_base_addr + 1, buf);
	if (ret) {
		hid_err(hdev, "can not get NumberOfFingers: %d.\n", ret);
		return ret;
	}
	data->max_fingers = (buf[0] & 0x07) + 1;
	if (data->max_fingers > 5)
		data->max_fingers = 10;

	data->f11.report_size = data->max_fingers * 5 +
				DIV_ROUND_UP(data->max_fingers, 4);

	if (!(buf[0] & BIT(4))) {
		hid_err(hdev, "No absolute events, giving up.\n");
		return -ENODEV;
	}

	has_rel = !!(buf[0] & BIT(3));
	has_gestures = !!(buf[0] & BIT(5));

	ret = rmi_read(hdev, data->f11.query_base_addr + 5, buf);
	if (ret) {
		hid_err(hdev, "can not get absolute data sources: %d.\n", ret);
		return ret;
	}

	has_dribble = !!(buf[0] & BIT(4));

	/*
	 * At least 4 queries are guaranteed to be present in F11
	 * +1 for query 5 which is present since absolute events are
	 * reported and +1 for query 12.
	 */
	query_offset = 6;

	if (has_rel)
		++query_offset; /* query 6 is present */

	if (has_gestures) {
		/* query 8 to find out if query 10 exists */
		ret = rmi_read(hdev,
			data->f11.query_base_addr + query_offset + 1, buf);
		if (ret) {
			hid_err(hdev, "can not read gesture information: %d.\n",
				ret);
			return ret;
		}
		has_palm_detect = !!(buf[0] & BIT(0));
		has_query10 = !!(buf[0] & BIT(2));

		query_offset += 2; /* query 7 and 8 are present */
	}

	if (has_query9)
		++query_offset;

	if (has_query10)
		++query_offset;

	if (has_query11)
		++query_offset;

	/* query 12 to know if the physical properties are reported */
	if (has_query12) {
		ret = rmi_read(hdev, data->f11.query_base_addr
				+ query_offset, buf);
		if (ret) {
			hid_err(hdev, "can not get query 12: %d.\n", ret);
			return ret;
		}
		has_physical_props = !!(buf[0] & BIT(5));

		if (has_physical_props) {
			query_offset += 1;
			ret = rmi_read_block(hdev,
					data->f11.query_base_addr
						+ query_offset, buf, 4);
			if (ret) {
				hid_err(hdev, "can not read query 15-18: %d.\n",
					ret);
				return ret;
			}

			x_size = buf[0] | (buf[1] << 8);
			y_size = buf[2] | (buf[3] << 8);

			data->x_size_mm = DIV_ROUND_CLOSEST(x_size, 10);
			data->y_size_mm = DIV_ROUND_CLOSEST(y_size, 10);

			hid_info(hdev, "%s: size in mm: %d x %d\n",
				 __func__, data->x_size_mm, data->y_size_mm);

			/*
			 * query 15 - 18 contain the size of the sensor
			 * and query 19 - 26 contain bezel dimensions
			 */
			query_offset += 12;
		}
	}

	if (has_query27)
		++query_offset;

	if (has_query28) {
		ret = rmi_read(hdev, data->f11.query_base_addr
				+ query_offset, buf);
		if (ret) {
			hid_err(hdev, "can not get query 28: %d.\n", ret);
			return ret;
		}

		has_query36 = !!(buf[0] & BIT(6));
	}

	if (has_query36) {
		query_offset += 2;
		ret = rmi_read(hdev, data->f11.query_base_addr
				+ query_offset, buf);
		if (ret) {
			hid_err(hdev, "can not get query 36: %d.\n", ret);
			return ret;
		}

		has_data40 = !!(buf[0] & BIT(5));
	}


	if (has_data40)
		data->f11.report_size += data->max_fingers * 2;

	ret = rmi_read_block(hdev, data->f11.control_base_addr,
			data->f11_ctrl_regs, RMI_F11_CTRL_REG_COUNT);
	if (ret) {
		hid_err(hdev, "can not read ctrl block of size 11: %d.\n", ret);
		return ret;
	}

	/* data->f11_ctrl_regs now contains valid register data */
	data->read_f11_ctrl_regs = true;

	data->max_x = data->f11_ctrl_regs[6] | (data->f11_ctrl_regs[7] << 8);
	data->max_y = data->f11_ctrl_regs[8] | (data->f11_ctrl_regs[9] << 8);

	if (has_dribble) {
		data->f11_ctrl_regs[0] = data->f11_ctrl_regs[0] & ~BIT(6);
		ret = rmi_write(hdev, data->f11.control_base_addr,
				data->f11_ctrl_regs);
		if (ret) {
			hid_err(hdev, "can not write to control reg 0: %d.\n",
				ret);
			return ret;
		}
	}

	if (has_palm_detect) {
		data->f11_ctrl_regs[11] = data->f11_ctrl_regs[11] & ~BIT(0);
		ret = rmi_write(hdev, data->f11.control_base_addr + 11,
				&data->f11_ctrl_regs[11]);
		if (ret) {
			hid_err(hdev, "can not write to control reg 11: %d.\n",
				ret);
			return ret;
		}
	}

	return 0;
}

static int rmi_populate_f30(struct hid_device *hdev)
{
	struct rmi_data *data = hid_get_drvdata(hdev);
	u8 buf[20];
	int ret;
	bool has_gpio, has_led;
	unsigned bytes_per_ctrl;
	u8 ctrl2_addr;
	int ctrl2_3_length;
	int i;

	/* function F30 is for physical buttons */
	if (!data->f30.query_base_addr) {
		hid_err(hdev, "No GPIO/LEDs found, giving up.\n");
		return -ENODEV;
	}

	ret = rmi_read_block(hdev, data->f30.query_base_addr, buf, 2);
	if (ret) {
		hid_err(hdev, "can not get F30 query registers: %d.\n", ret);
		return ret;
	}

	has_gpio = !!(buf[0] & BIT(3));
	has_led = !!(buf[0] & BIT(2));
	data->gpio_led_count = buf[1] & 0x1f;

	/* retrieve ctrl 2 & 3 registers */
	bytes_per_ctrl = (data->gpio_led_count + 7) / 8;
	/* Ctrl0 is present only if both has_gpio and has_led are set*/
	ctrl2_addr = (has_gpio && has_led) ? bytes_per_ctrl : 0;
	/* Ctrl1 is always be present */
	ctrl2_addr += bytes_per_ctrl;
	ctrl2_3_length = 2 * bytes_per_ctrl;

	data->f30.report_size = bytes_per_ctrl;

	ret = rmi_read_block(hdev, data->f30.control_base_addr + ctrl2_addr,
				buf, ctrl2_3_length);
	if (ret) {
		hid_err(hdev, "can not read ctrl 2&3 block of size %d: %d.\n",
			ctrl2_3_length, ret);
		return ret;
	}

	for (i = 0; i < data->gpio_led_count; i++) {
		int byte_position = i >> 3;
		int bit_position = i & 0x07;
		u8 dir_byte = buf[byte_position];
		u8 data_byte = buf[byte_position + bytes_per_ctrl];
		bool dir = (dir_byte >> bit_position) & BIT(0);
		bool dat = (data_byte >> bit_position) & BIT(0);

		if (dir == 0) {
			/* input mode */
			if (dat) {
				/* actual buttons have pull up resistor */
				data->button_count++;
				set_bit(i, &data->button_mask);
				set_bit(i, &data->button_state_mask);
			}
		}

	}

	return 0;
}

static int rmi_populate(struct hid_device *hdev)
{
	struct rmi_data *data = hid_get_drvdata(hdev);
	int ret;

	ret = rmi_scan_pdt(hdev);
	if (ret) {
		hid_err(hdev, "PDT scan failed with code %d.\n", ret);
		return ret;
	}

	ret = rmi_populate_f01(hdev);
	if (ret) {
		hid_err(hdev, "Error while initializing F01 (%d).\n", ret);
		return ret;
	}

	ret = rmi_populate_f11(hdev);
	if (ret) {
		hid_err(hdev, "Error while initializing F11 (%d).\n", ret);
		return ret;
	}

	if (!(data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS)) {
		ret = rmi_populate_f30(hdev);
		if (ret)
			hid_warn(hdev, "Error while initializing F30 (%d).\n", ret);
	}

	return 0;
}

static int rmi_input_configured(struct hid_device *hdev, struct hid_input *hi)
{
	struct rmi_data *data = hid_get_drvdata(hdev);
	struct input_dev *input = hi->input;
	int ret;
	int res_x, res_y, i;

	data->input = input;

	hid_dbg(hdev, "Opening low level driver\n");
	ret = hid_hw_open(hdev);
	if (ret)
		return ret;

	if (!(data->device_flags & RMI_DEVICE))
		return 0;

	/* Allow incoming hid reports */
	hid_device_io_start(hdev);

	ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS);
	if (ret < 0) {
		dev_err(&hdev->dev, "failed to set rmi mode\n");
		goto exit;
	}

	ret = rmi_set_page(hdev, 0);
	if (ret < 0) {
		dev_err(&hdev->dev, "failed to set page select to 0.\n");
		goto exit;
	}

	ret = rmi_populate(hdev);
	if (ret)
		goto exit;

	hid_info(hdev, "firmware id: %ld\n", data->firmware_id);

	__set_bit(EV_ABS, input->evbit);
	input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->max_x, 0, 0);
	input_set_abs_params(input, ABS_MT_POSITION_Y, 1, data->max_y, 0, 0);

	if (data->x_size_mm && data->y_size_mm) {
		res_x = (data->max_x - 1) / data->x_size_mm;
		res_y = (data->max_y - 1) / data->y_size_mm;

		input_abs_set_res(input, ABS_MT_POSITION_X, res_x);
		input_abs_set_res(input, ABS_MT_POSITION_Y, res_y);
	}

	input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0);
	input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xff, 0, 0);
	input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0);
	input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0);

	ret = input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER);
	if (ret < 0)
		goto exit;

	if (data->button_count) {
		__set_bit(EV_KEY, input->evbit);
		for (i = 0; i < data->button_count; i++)
			__set_bit(BTN_LEFT + i, input->keybit);

		if (data->button_count == 1)
			__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
	}

	set_bit(RMI_STARTED, &data->flags);

exit:
	hid_device_io_stop(hdev);
	hid_hw_close(hdev);
	return ret;
}

static int rmi_input_mapping(struct hid_device *hdev,
		struct hid_input *hi, struct hid_field *field,
		struct hid_usage *usage, unsigned long **bit, int *max)
{
	struct rmi_data *data = hid_get_drvdata(hdev);

	/*
	 * we want to make HID ignore the advertised HID collection
	 * for RMI deivces
	 */
	if (data->device_flags & RMI_DEVICE) {
		if ((data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) &&
		    ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON))
			return 0;

		return -1;
	}

	return 0;
}

static int rmi_check_valid_report_id(struct hid_device *hdev, unsigned type,
		unsigned id, struct hid_report **report)
{
	int i;

	*report = hdev->report_enum[type].report_id_hash[id];
	if (*report) {
		for (i = 0; i < (*report)->maxfield; i++) {
			unsigned app = (*report)->field[i]->application;
			if ((app & HID_USAGE_PAGE) >= HID_UP_MSVENDOR)
				return 1;
		}
	}

	return 0;
}

static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
	struct rmi_data *data = NULL;
	int ret;
	size_t alloc_size;
	struct hid_report *input_report;
	struct hid_report *output_report;
	struct hid_report *feature_report;

	data = devm_kzalloc(&hdev->dev, sizeof(struct rmi_data), GFP_KERNEL);
	if (!data)
		return -ENOMEM;

	INIT_WORK(&data->reset_work, rmi_reset_work);
	data->hdev = hdev;

	hid_set_drvdata(hdev, data);

	hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;

	ret = hid_parse(hdev);
	if (ret) {
		hid_err(hdev, "parse failed\n");
		return ret;
	}

	if (id->driver_data)
		data->device_flags = id->driver_data;

	/*
	 * Check for the RMI specific report ids. If they are misisng
	 * simply return and let the events be processed by hid-input
	 */
	if (!rmi_check_valid_report_id(hdev, HID_FEATURE_REPORT,
	    RMI_SET_RMI_MODE_REPORT_ID, &feature_report)) {
		hid_dbg(hdev, "device does not have set mode feature report\n");
		goto start;
	}

	if (!rmi_check_valid_report_id(hdev, HID_INPUT_REPORT,
	    RMI_ATTN_REPORT_ID, &input_report)) {
		hid_dbg(hdev, "device does not have attention input report\n");
		goto start;
	}

	data->input_report_size = hid_report_len(input_report);

	if (!rmi_check_valid_report_id(hdev, HID_OUTPUT_REPORT,
	    RMI_WRITE_REPORT_ID, &output_report)) {
		hid_dbg(hdev,
			"device does not have rmi write output report\n");
		goto start;
	}

	data->output_report_size = hid_report_len(output_report);

	data->device_flags |= RMI_DEVICE;
	alloc_size = data->output_report_size + data->input_report_size;

	data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL);
	if (!data->writeReport) {
		ret = -ENOMEM;
		return ret;
	}

	data->readReport = data->writeReport + data->output_report_size;

	init_waitqueue_head(&data->wait);

	mutex_init(&data->page_mutex);

start:
	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
	if (ret) {
		hid_err(hdev, "hw start failed\n");
		return ret;
	}

	if ((data->device_flags & RMI_DEVICE) &&
	    !test_bit(RMI_STARTED, &data->flags))
		/*
		 * The device maybe in the bootloader if rmi_input_configured
		 * failed to find F11 in the PDT. Print an error, but don't
		 * return an error from rmi_probe so that hidraw will be
		 * accessible from userspace. That way a userspace tool
		 * can be used to reload working firmware on the touchpad.
		 */
		hid_err(hdev, "Device failed to be properly configured\n");

	return 0;
}

static void rmi_remove(struct hid_device *hdev)
{
	struct rmi_data *hdata = hid_get_drvdata(hdev);

	clear_bit(RMI_STARTED, &hdata->flags);

	hid_hw_stop(hdev);
}

static const struct hid_device_id rmi_id[] = {
	{ HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14),
		.driver_data = RMI_DEVICE_HAS_PHYS_BUTTONS },
	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID) },
	{ }
};
MODULE_DEVICE_TABLE(hid, rmi_id);

static struct hid_driver rmi_driver = {
	.name = "hid-rmi",
	.id_table		= rmi_id,
	.probe			= rmi_probe,
	.remove			= rmi_remove,
	.event			= rmi_event,
	.raw_event		= rmi_raw_event,
	.input_mapping		= rmi_input_mapping,
	.input_configured	= rmi_input_configured,
#ifdef CONFIG_PM
	.suspend		= rmi_suspend,
	.resume			= rmi_post_resume,
	.reset_resume		= rmi_post_reset,
#endif
};

module_hid_driver(rmi_driver);

MODULE_AUTHOR("Andrew Duggan <aduggan@synaptics.com>");
MODULE_DESCRIPTION("RMI HID driver");
MODULE_LICENSE("GPL");