/*
 * SAMSUNG EXYNOS5250 SoC device tree source
 *
 * Copyright (c) 2012 Samsung Electronics Co., Ltd.
 *		http://www.samsung.com
 *
 * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
 * EXYNOS5250 based board files can include this file and provide
 * values for board specfic bindings.
 *
 * Note: This file does not include device nodes for all the controllers in
 * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
 * additional nodes can be added to this file.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <dt-bindings/clock/exynos5250.h>
#include "exynos5.dtsi"
#include "exynos4-cpu-thermal.dtsi"
#include <dt-bindings/clock/exynos-audss-clk.h>

/ {
	compatible = "samsung,exynos5250", "samsung,exynos5";

	aliases {
		spi0 = &spi_0;
		spi1 = &spi_1;
		spi2 = &spi_2;
		gsc0 = &gsc_0;
		gsc1 = &gsc_1;
		gsc2 = &gsc_2;
		gsc3 = &gsc_3;
		mshc0 = &mmc_0;
		mshc1 = &mmc_1;
		mshc2 = &mmc_2;
		mshc3 = &mmc_3;
		i2c0 = &i2c_0;
		i2c1 = &i2c_1;
		i2c2 = &i2c_2;
		i2c3 = &i2c_3;
		i2c4 = &i2c_4;
		i2c5 = &i2c_5;
		i2c6 = &i2c_6;
		i2c7 = &i2c_7;
		i2c8 = &i2c_8;
		i2c9 = &i2c_9;
		pinctrl0 = &pinctrl_0;
		pinctrl1 = &pinctrl_1;
		pinctrl2 = &pinctrl_2;
		pinctrl3 = &pinctrl_3;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <0>;
			clock-frequency = <1700000000>;
			clocks = <&clock CLK_ARM_CLK>;
			clock-names = "cpu";
			clock-latency = <140000>;

			operating-points = <
				1700000 1300000
				1600000 1250000
				1500000 1225000
				1400000 1200000
				1300000 1150000
				1200000 1125000
				1100000 1100000
				1000000 1075000
				 900000 1050000
				 800000 1025000
				 700000 1012500
				 600000 1000000
				 500000  975000
				 400000  950000
				 300000  937500
				 200000  925000
			>;
			cooling-min-level = <15>;
			cooling-max-level = <9>;
			#cooling-cells = <2>; /* min followed by max */
		};
		cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a15";
			reg = <1>;
			clock-frequency = <1700000000>;
		};
	};

	sysram@02020000 {
		compatible = "mmio-sram";
		reg = <0x02020000 0x30000>;
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0 0x02020000 0x30000>;

		smp-sysram@0 {
			compatible = "samsung,exynos4210-sysram";
			reg = <0x0 0x1000>;
		};

		smp-sysram@2f000 {
			compatible = "samsung,exynos4210-sysram-ns";
			reg = <0x2f000 0x1000>;
		};
	};

	pd_gsc: gsc-power-domain@10044000 {
		compatible = "samsung,exynos4210-pd";
		reg = <0x10044000 0x20>;
		#power-domain-cells = <0>;
	};

	pd_mfc: mfc-power-domain@10044040 {
		compatible = "samsung,exynos4210-pd";
		reg = <0x10044040 0x20>;
		#power-domain-cells = <0>;
	};

	pd_disp1: disp1-power-domain@100440A0 {
		compatible = "samsung,exynos4210-pd";
		reg = <0x100440A0 0x20>;
		#power-domain-cells = <0>;
		clocks = <&clock CLK_FIN_PLL>,
			 <&clock CLK_MOUT_ACLK200_DISP1_SUB>,
			 <&clock CLK_MOUT_ACLK300_DISP1_SUB>;
		clock-names = "oscclk", "clk0", "clk1";
	};

	clock: clock-controller@10010000 {
		compatible = "samsung,exynos5250-clock";
		reg = <0x10010000 0x30000>;
		#clock-cells = <1>;
	};

	clock_audss: audss-clock-controller@3810000 {
		compatible = "samsung,exynos5250-audss-clock";
		reg = <0x03810000 0x0C>;
		#clock-cells = <1>;
		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
			 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
	};

	timer {
		compatible = "arm,armv7-timer";
		interrupts = <1 13 0xf08>,
			     <1 14 0xf08>,
			     <1 11 0xf08>,
			     <1 10 0xf08>;
		/* Unfortunately we need this since some versions of U-Boot
		 * on Exynos don't set the CNTFRQ register, so we need the
		 * value from DT.
		 */
		clock-frequency = <24000000>;
	};

	mct@101C0000 {
		compatible = "samsung,exynos4210-mct";
		reg = <0x101C0000 0x800>;
		interrupt-controller;
		#interrupt-cells = <2>;
		interrupt-parent = <&mct_map>;
		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
			     <4 0>, <5 0>;
		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
		clock-names = "fin_pll", "mct";

		mct_map: mct-map {
			#interrupt-cells = <2>;
			#address-cells = <0>;
			#size-cells = <0>;
			interrupt-map = <0x0 0 &combiner 23 3>,
					<0x1 0 &combiner 23 4>,
					<0x2 0 &combiner 25 2>,
					<0x3 0 &combiner 25 3>,
					<0x4 0 &gic 0 120 0>,
					<0x5 0 &gic 0 121 0>;
		};
	};

	pmu {
		compatible = "arm,cortex-a15-pmu";
		interrupt-parent = <&combiner>;
		interrupts = <1 2>, <22 4>;
	};

	pinctrl_0: pinctrl@11400000 {
		compatible = "samsung,exynos5250-pinctrl";
		reg = <0x11400000 0x1000>;
		interrupts = <0 46 0>;

		wakup_eint: wakeup-interrupt-controller {
			compatible = "samsung,exynos4210-wakeup-eint";
			interrupt-parent = <&gic>;
			interrupts = <0 32 0>;
		};
	};

	pinctrl_1: pinctrl@13400000 {
		compatible = "samsung,exynos5250-pinctrl";
		reg = <0x13400000 0x1000>;
		interrupts = <0 45 0>;
	};

	pinctrl_2: pinctrl@10d10000 {
		compatible = "samsung,exynos5250-pinctrl";
		reg = <0x10d10000 0x1000>;
		interrupts = <0 50 0>;
	};

	pinctrl_3: pinctrl@03860000 {
		compatible = "samsung,exynos5250-pinctrl";
		reg = <0x03860000 0x1000>;
		interrupts = <0 47 0>;
	};

	pmu_system_controller: system-controller@10040000 {
		compatible = "samsung,exynos5250-pmu", "syscon";
		reg = <0x10040000 0x5000>;
		clock-names = "clkout16";
		clocks = <&clock CLK_FIN_PLL>;
		#clock-cells = <1>;
		interrupt-controller;
		#interrupt-cells = <3>;
		interrupt-parent = <&gic>;
	};

	sysreg_system_controller: syscon@10050000 {
		compatible = "samsung,exynos5-sysreg", "syscon";
		reg = <0x10050000 0x5000>;
	};

	watchdog@101D0000 {
		compatible = "samsung,exynos5250-wdt";
		reg = <0x101D0000 0x100>;
		interrupts = <0 42 0>;
		clocks = <&clock CLK_WDT>;
		clock-names = "watchdog";
		samsung,syscon-phandle = <&pmu_system_controller>;
	};

	g2d@10850000 {
		compatible = "samsung,exynos5250-g2d";
		reg = <0x10850000 0x1000>;
		interrupts = <0 91 0>;
		clocks = <&clock CLK_G2D>;
		clock-names = "fimg2d";
		iommus = <&sysmmu_g2d>;
	};

	mfc: codec@11000000 {
		compatible = "samsung,mfc-v6";
		reg = <0x11000000 0x10000>;
		interrupts = <0 96 0>;
		power-domains = <&pd_mfc>;
		clocks = <&clock CLK_MFC>;
		clock-names = "mfc";
		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
		iommu-names = "left", "right";
	};

	tmu: tmu@10060000 {
		compatible = "samsung,exynos5250-tmu";
		reg = <0x10060000 0x100>;
		interrupts = <0 65 0>;
		clocks = <&clock CLK_TMU>;
		clock-names = "tmu_apbif";
		#include "exynos4412-tmu-sensor-conf.dtsi"
	};

	thermal-zones {
		cpu_thermal: cpu-thermal {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-sensors = <&tmu 0>;

			cooling-maps {
				map0 {
				     /* Corresponds to 800MHz at freq_table */
				     cooling-device = <&cpu0 9 9>;
				};
				map1 {
				     /* Corresponds to 200MHz at freq_table */
				     cooling-device = <&cpu0 15 15>;
			       };
		       };
		};
	};

	sata: sata@122F0000 {
		compatible = "snps,dwc-ahci";
		samsung,sata-freq = <66>;
		reg = <0x122F0000 0x1ff>;
		interrupts = <0 115 0>;
		clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
		clock-names = "sata", "sclk_sata";
		phys = <&sata_phy>;
		phy-names = "sata-phy";
		status = "disabled";
	};

	sata_phy: sata-phy@12170000 {
		compatible = "samsung,exynos5250-sata-phy";
		reg = <0x12170000 0x1ff>;
		clocks = <&clock CLK_SATA_PHYCTRL>;
		clock-names = "sata_phyctrl";
		#phy-cells = <0>;
		samsung,syscon-phandle = <&pmu_system_controller>;
		status = "disabled";
	};

	i2c_0: i2c@12C60000 {
		compatible = "samsung,s3c2440-i2c";
		reg = <0x12C60000 0x100>;
		interrupts = <0 56 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_I2C0>;
		clock-names = "i2c";
		pinctrl-names = "default";
		pinctrl-0 = <&i2c0_bus>;
		samsung,sysreg-phandle = <&sysreg_system_controller>;
		status = "disabled";
	};

	i2c_1: i2c@12C70000 {
		compatible = "samsung,s3c2440-i2c";
		reg = <0x12C70000 0x100>;
		interrupts = <0 57 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_I2C1>;
		clock-names = "i2c";
		pinctrl-names = "default";
		pinctrl-0 = <&i2c1_bus>;
		samsung,sysreg-phandle = <&sysreg_system_controller>;
		status = "disabled";
	};

	i2c_2: i2c@12C80000 {
		compatible = "samsung,s3c2440-i2c";
		reg = <0x12C80000 0x100>;
		interrupts = <0 58 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_I2C2>;
		clock-names = "i2c";
		pinctrl-names = "default";
		pinctrl-0 = <&i2c2_bus>;
		samsung,sysreg-phandle = <&sysreg_system_controller>;
		status = "disabled";
	};

	i2c_3: i2c@12C90000 {
		compatible = "samsung,s3c2440-i2c";
		reg = <0x12C90000 0x100>;
		interrupts = <0 59 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_I2C3>;
		clock-names = "i2c";
		pinctrl-names = "default";
		pinctrl-0 = <&i2c3_bus>;
		samsung,sysreg-phandle = <&sysreg_system_controller>;
		status = "disabled";
	};

	i2c_4: i2c@12CA0000 {
		compatible = "samsung,s3c2440-i2c";
		reg = <0x12CA0000 0x100>;
		interrupts = <0 60 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_I2C4>;
		clock-names = "i2c";
		pinctrl-names = "default";
		pinctrl-0 = <&i2c4_bus>;
		status = "disabled";
	};

	i2c_5: i2c@12CB0000 {
		compatible = "samsung,s3c2440-i2c";
		reg = <0x12CB0000 0x100>;
		interrupts = <0 61 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_I2C5>;
		clock-names = "i2c";
		pinctrl-names = "default";
		pinctrl-0 = <&i2c5_bus>;
		status = "disabled";
	};

	i2c_6: i2c@12CC0000 {
		compatible = "samsung,s3c2440-i2c";
		reg = <0x12CC0000 0x100>;
		interrupts = <0 62 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_I2C6>;
		clock-names = "i2c";
		pinctrl-names = "default";
		pinctrl-0 = <&i2c6_bus>;
		status = "disabled";
	};

	i2c_7: i2c@12CD0000 {
		compatible = "samsung,s3c2440-i2c";
		reg = <0x12CD0000 0x100>;
		interrupts = <0 63 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_I2C7>;
		clock-names = "i2c";
		pinctrl-names = "default";
		pinctrl-0 = <&i2c7_bus>;
		status = "disabled";
	};

	i2c_8: i2c@12CE0000 {
		compatible = "samsung,s3c2440-hdmiphy-i2c";
		reg = <0x12CE0000 0x1000>;
		interrupts = <0 64 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_I2C_HDMI>;
		clock-names = "i2c";
		status = "disabled";
	};

	i2c_9: i2c@121D0000 {
                compatible = "samsung,exynos5-sata-phy-i2c";
                reg = <0x121D0000 0x100>;
                #address-cells = <1>;
                #size-cells = <0>;
		clocks = <&clock CLK_SATA_PHYI2C>;
		clock-names = "i2c";
		status = "disabled";
	};

	spi_0: spi@12d20000 {
		compatible = "samsung,exynos4210-spi";
		status = "disabled";
		reg = <0x12d20000 0x100>;
		interrupts = <0 66 0>;
		dmas = <&pdma0 5
			&pdma0 4>;
		dma-names = "tx", "rx";
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
		clock-names = "spi", "spi_busclk0";
		pinctrl-names = "default";
		pinctrl-0 = <&spi0_bus>;
	};

	spi_1: spi@12d30000 {
		compatible = "samsung,exynos4210-spi";
		status = "disabled";
		reg = <0x12d30000 0x100>;
		interrupts = <0 67 0>;
		dmas = <&pdma1 5
			&pdma1 4>;
		dma-names = "tx", "rx";
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
		clock-names = "spi", "spi_busclk0";
		pinctrl-names = "default";
		pinctrl-0 = <&spi1_bus>;
	};

	spi_2: spi@12d40000 {
		compatible = "samsung,exynos4210-spi";
		status = "disabled";
		reg = <0x12d40000 0x100>;
		interrupts = <0 68 0>;
		dmas = <&pdma0 7
			&pdma0 6>;
		dma-names = "tx", "rx";
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
		clock-names = "spi", "spi_busclk0";
		pinctrl-names = "default";
		pinctrl-0 = <&spi2_bus>;
	};

	mmc_0: mmc@12200000 {
		compatible = "samsung,exynos5250-dw-mshc";
		interrupts = <0 75 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x12200000 0x1000>;
		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
		clock-names = "biu", "ciu";
		fifo-depth = <0x80>;
		status = "disabled";
	};

	mmc_1: mmc@12210000 {
		compatible = "samsung,exynos5250-dw-mshc";
		interrupts = <0 76 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x12210000 0x1000>;
		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
		clock-names = "biu", "ciu";
		fifo-depth = <0x80>;
		status = "disabled";
	};

	mmc_2: mmc@12220000 {
		compatible = "samsung,exynos5250-dw-mshc";
		interrupts = <0 77 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x12220000 0x1000>;
		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
		clock-names = "biu", "ciu";
		fifo-depth = <0x80>;
		status = "disabled";
	};

	mmc_3: mmc@12230000 {
		compatible = "samsung,exynos5250-dw-mshc";
		reg = <0x12230000 0x1000>;
		interrupts = <0 78 0>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
		clock-names = "biu", "ciu";
		fifo-depth = <0x80>;
		status = "disabled";
	};

	i2s0: i2s@03830000 {
		compatible = "samsung,s5pv210-i2s";
		status = "disabled";
		reg = <0x03830000 0x100>;
		dmas = <&pdma0 10
			&pdma0 9
			&pdma0 8>;
		dma-names = "tx", "rx", "tx-sec";
		clocks = <&clock_audss EXYNOS_I2S_BUS>,
			<&clock_audss EXYNOS_I2S_BUS>,
			<&clock_audss EXYNOS_SCLK_I2S>;
		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
		samsung,idma-addr = <0x03000000>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2s0_bus>;
	};

	i2s1: i2s@12D60000 {
		compatible = "samsung,s3c6410-i2s";
		status = "disabled";
		reg = <0x12D60000 0x100>;
		dmas = <&pdma1 12
			&pdma1 11>;
		dma-names = "tx", "rx";
		clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
		clock-names = "iis", "i2s_opclk0";
		pinctrl-names = "default";
		pinctrl-0 = <&i2s1_bus>;
	};

	i2s2: i2s@12D70000 {
		compatible = "samsung,s3c6410-i2s";
		status = "disabled";
		reg = <0x12D70000 0x100>;
		dmas = <&pdma0 12
			&pdma0 11>;
		dma-names = "tx", "rx";
		clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
		clock-names = "iis", "i2s_opclk0";
		pinctrl-names = "default";
		pinctrl-0 = <&i2s2_bus>;
	};

	usb@12000000 {
		compatible = "samsung,exynos5250-dwusb3";
		clocks = <&clock CLK_USB3>;
		clock-names = "usbdrd30";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		usbdrd_dwc3: dwc3 {
			compatible = "synopsys,dwc3";
			reg = <0x12000000 0x10000>;
			interrupts = <0 72 0>;
			phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
			phy-names = "usb2-phy", "usb3-phy";
		};
	};

	usbdrd_phy: phy@12100000 {
		compatible = "samsung,exynos5250-usbdrd-phy";
		reg = <0x12100000 0x100>;
		clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
		clock-names = "phy", "ref";
		samsung,pmu-syscon = <&pmu_system_controller>;
		#phy-cells = <1>;
	};

	ehci: usb@12110000 {
		compatible = "samsung,exynos4210-ehci";
		reg = <0x12110000 0x100>;
		interrupts = <0 71 0>;

		clocks = <&clock CLK_USB2>;
		clock-names = "usbhost";
		#address-cells = <1>;
		#size-cells = <0>;
		port@0 {
			reg = <0>;
			phys = <&usb2_phy_gen 1>;
		};
	};

	ohci: usb@12120000 {
		compatible = "samsung,exynos4210-ohci";
		reg = <0x12120000 0x100>;
		interrupts = <0 71 0>;

		clocks = <&clock CLK_USB2>;
		clock-names = "usbhost";
		#address-cells = <1>;
		#size-cells = <0>;
		port@0 {
			reg = <0>;
			phys = <&usb2_phy_gen 1>;
		};
	};

	usb2_phy_gen: phy@12130000 {
		compatible = "samsung,exynos5250-usb2-phy";
		reg = <0x12130000 0x100>;
		clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
		clock-names = "phy", "ref";
		#phy-cells = <1>;
		samsung,sysreg-phandle = <&sysreg_system_controller>;
		samsung,pmureg-phandle = <&pmu_system_controller>;
	};

	pwm: pwm@12dd0000 {
		compatible = "samsung,exynos4210-pwm";
		reg = <0x12dd0000 0x100>;
		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
		#pwm-cells = <3>;
		clocks = <&clock CLK_PWM>;
		clock-names = "timers";
	};

	amba {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "arm,amba-bus";
		interrupt-parent = <&gic>;
		ranges;

		pdma0: pdma@121A0000 {
			compatible = "arm,pl330", "arm,primecell";
			reg = <0x121A0000 0x1000>;
			interrupts = <0 34 0>;
			clocks = <&clock CLK_PDMA0>;
			clock-names = "apb_pclk";
			#dma-cells = <1>;
			#dma-channels = <8>;
			#dma-requests = <32>;
		};

		pdma1: pdma@121B0000 {
			compatible = "arm,pl330", "arm,primecell";
			reg = <0x121B0000 0x1000>;
			interrupts = <0 35 0>;
			clocks = <&clock CLK_PDMA1>;
			clock-names = "apb_pclk";
			#dma-cells = <1>;
			#dma-channels = <8>;
			#dma-requests = <32>;
		};

		mdma0: mdma@10800000 {
			compatible = "arm,pl330", "arm,primecell";
			reg = <0x10800000 0x1000>;
			interrupts = <0 33 0>;
			clocks = <&clock CLK_MDMA0>;
			clock-names = "apb_pclk";
			#dma-cells = <1>;
			#dma-channels = <8>;
			#dma-requests = <1>;
		};

		mdma1: mdma@11C10000 {
			compatible = "arm,pl330", "arm,primecell";
			reg = <0x11C10000 0x1000>;
			interrupts = <0 124 0>;
			clocks = <&clock CLK_MDMA1>;
			clock-names = "apb_pclk";
			#dma-cells = <1>;
			#dma-channels = <8>;
			#dma-requests = <1>;
		};
	};

	gsc_0:  gsc@13e00000 {
		compatible = "samsung,exynos5-gsc";
		reg = <0x13e00000 0x1000>;
		interrupts = <0 85 0>;
		power-domains = <&pd_gsc>;
		clocks = <&clock CLK_GSCL0>;
		clock-names = "gscl";
		iommu = <&sysmmu_gsc0>;
	};

	gsc_1:  gsc@13e10000 {
		compatible = "samsung,exynos5-gsc";
		reg = <0x13e10000 0x1000>;
		interrupts = <0 86 0>;
		power-domains = <&pd_gsc>;
		clocks = <&clock CLK_GSCL1>;
		clock-names = "gscl";
		iommu = <&sysmmu_gsc1>;
	};

	gsc_2:  gsc@13e20000 {
		compatible = "samsung,exynos5-gsc";
		reg = <0x13e20000 0x1000>;
		interrupts = <0 87 0>;
		power-domains = <&pd_gsc>;
		clocks = <&clock CLK_GSCL2>;
		clock-names = "gscl";
		iommu = <&sysmmu_gsc2>;
	};

	gsc_3:  gsc@13e30000 {
		compatible = "samsung,exynos5-gsc";
		reg = <0x13e30000 0x1000>;
		interrupts = <0 88 0>;
		power-domains = <&pd_gsc>;
		clocks = <&clock CLK_GSCL3>;
		clock-names = "gscl";
		iommu = <&sysmmu_gsc3>;
	};

	hdmi: hdmi {
		compatible = "samsung,exynos4212-hdmi";
		reg = <0x14530000 0x70000>;
		power-domains = <&pd_disp1>;
		interrupts = <0 95 0>;
		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
			 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
			 <&clock CLK_MOUT_HDMI>;
		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
				"sclk_hdmiphy", "mout_hdmi";
		samsung,syscon-phandle = <&pmu_system_controller>;
	};

	mixer {
		compatible = "samsung,exynos5250-mixer";
		reg = <0x14450000 0x10000>;
		power-domains = <&pd_disp1>;
		interrupts = <0 94 0>;
		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
			 <&clock CLK_SCLK_HDMI>;
		clock-names = "mixer", "hdmi", "sclk_hdmi";
		iommus = <&sysmmu_tv>;
	};

	dp_phy: video-phy@10040720 {
		compatible = "samsung,exynos5250-dp-video-phy";
		samsung,pmu-syscon = <&pmu_system_controller>;
		#phy-cells = <0>;
	};

	adc: adc@12D10000 {
		compatible = "samsung,exynos-adc-v1";
		reg = <0x12D10000 0x100>;
		interrupts = <0 106 0>;
		clocks = <&clock CLK_ADC>;
		clock-names = "adc";
		#io-channel-cells = <1>;
		io-channel-ranges;
		samsung,syscon-phandle = <&pmu_system_controller>;
		status = "disabled";
	};

	sss@10830000 {
		compatible = "samsung,exynos4210-secss";
		reg = <0x10830000 0x10000>;
		interrupts = <0 112 0>;
		clocks = <&clock CLK_SSS>;
		clock-names = "secss";
	};

	sysmmu_g2d: sysmmu@10A60000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x10A60000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <24 5>;
		clock-names = "sysmmu", "master";
		clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
		#iommu-cells = <0>;
	};

	sysmmu_mfc_r: sysmmu@11200000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x11200000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <6 2>;
		power-domains = <&pd_mfc>;
		clock-names = "sysmmu", "master";
		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
		#iommu-cells = <0>;
	};

	sysmmu_mfc_l: sysmmu@11210000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x11210000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <8 5>;
		power-domains = <&pd_mfc>;
		clock-names = "sysmmu", "master";
		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
		#iommu-cells = <0>;
	};

	sysmmu_rotator: sysmmu@11D40000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x11D40000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <4 0>;
		clock-names = "sysmmu", "master";
		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
		#iommu-cells = <0>;
	};

	sysmmu_jpeg: sysmmu@11F20000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x11F20000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <4 2>;
		power-domains = <&pd_gsc>;
		clock-names = "sysmmu", "master";
		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
		#iommu-cells = <0>;
	};

	sysmmu_fimc_isp: sysmmu@13260000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x13260000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <10 6>;
		clock-names = "sysmmu";
		clocks = <&clock CLK_SMMU_FIMC_ISP>;
		#iommu-cells = <0>;
	};

	sysmmu_fimc_drc: sysmmu@13270000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x13270000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <11 6>;
		clock-names = "sysmmu";
		clocks = <&clock CLK_SMMU_FIMC_DRC>;
		#iommu-cells = <0>;
	};

	sysmmu_fimc_fd: sysmmu@132A0000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x132A0000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <5 0>;
		clock-names = "sysmmu";
		clocks = <&clock CLK_SMMU_FIMC_FD>;
		#iommu-cells = <0>;
	};

	sysmmu_fimc_scc: sysmmu@13280000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x13280000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <5 2>;
		clock-names = "sysmmu";
		clocks = <&clock CLK_SMMU_FIMC_SCC>;
		#iommu-cells = <0>;
	};

	sysmmu_fimc_scp: sysmmu@13290000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x13290000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <3 6>;
		clock-names = "sysmmu";
		clocks = <&clock CLK_SMMU_FIMC_SCP>;
		#iommu-cells = <0>;
	};

	sysmmu_fimc_mcuctl: sysmmu@132B0000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x132B0000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <5 4>;
		clock-names = "sysmmu";
		clocks = <&clock CLK_SMMU_FIMC_MCU>;
		#iommu-cells = <0>;
	};

	sysmmu_fimc_odc: sysmmu@132C0000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x132C0000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <11 0>;
		clock-names = "sysmmu";
		clocks = <&clock CLK_SMMU_FIMC_ODC>;
		#iommu-cells = <0>;
	};

	sysmmu_fimc_dis0: sysmmu@132D0000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x132D0000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <10 4>;
		clock-names = "sysmmu";
		clocks = <&clock CLK_SMMU_FIMC_DIS0>;
		#iommu-cells = <0>;
	};

	sysmmu_fimc_dis1: sysmmu@132E0000{
		compatible = "samsung,exynos-sysmmu";
		reg = <0x132E0000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <9 4>;
		clock-names = "sysmmu";
		clocks = <&clock CLK_SMMU_FIMC_DIS1>;
		#iommu-cells = <0>;
	};

	sysmmu_fimc_3dnr: sysmmu@132F0000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x132F0000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <5 6>;
		clock-names = "sysmmu";
		clocks = <&clock CLK_SMMU_FIMC_3DNR>;
		#iommu-cells = <0>;
	};

	sysmmu_fimc_lite0: sysmmu@13C40000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x13C40000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <3 4>;
		power-domains = <&pd_gsc>;
		clock-names = "sysmmu", "master";
		clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
		#iommu-cells = <0>;
	};

	sysmmu_fimc_lite1: sysmmu@13C50000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x13C50000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <24 1>;
		power-domains = <&pd_gsc>;
		clock-names = "sysmmu", "master";
		clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
		#iommu-cells = <0>;
	};

	sysmmu_gsc0: sysmmu@13E80000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x13E80000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <2 0>;
		power-domains = <&pd_gsc>;
		clock-names = "sysmmu", "master";
		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
		#iommu-cells = <0>;
	};

	sysmmu_gsc1: sysmmu@13E90000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x13E90000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <2 2>;
		power-domains = <&pd_gsc>;
		clock-names = "sysmmu", "master";
		clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
		#iommu-cells = <0>;
	};

	sysmmu_gsc2: sysmmu@13EA0000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x13EA0000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <2 4>;
		power-domains = <&pd_gsc>;
		clock-names = "sysmmu", "master";
		clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
		#iommu-cells = <0>;
	};

	sysmmu_gsc3: sysmmu@13EB0000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x13EB0000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <2 6>;
		power-domains = <&pd_gsc>;
		clock-names = "sysmmu", "master";
		clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
		#iommu-cells = <0>;
	};

	sysmmu_fimd1: sysmmu@14640000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x14640000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <3 2>;
		power-domains = <&pd_disp1>;
		clock-names = "sysmmu", "master";
		clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
		#iommu-cells = <0>;
	};

	sysmmu_tv: sysmmu@14650000 {
		compatible = "samsung,exynos-sysmmu";
		reg = <0x14650000 0x1000>;
		interrupt-parent = <&combiner>;
		interrupts = <7 4>;
		power-domains = <&pd_disp1>;
		clock-names = "sysmmu", "master";
		clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
		#iommu-cells = <0>;
	};
};

&dp {
	power-domains = <&pd_disp1>;
	clocks = <&clock CLK_DP>;
	clock-names = "dp";
	phys = <&dp_phy>;
	phy-names = "dp";
};

&fimd {
	power-domains = <&pd_disp1>;
	clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
	clock-names = "sclk_fimd", "fimd";
	iommus = <&sysmmu_fimd1>;
};

&rtc {
	clocks = <&clock CLK_RTC>;
	clock-names = "rtc";
	interrupt-parent = <&pmu_system_controller>;
	status = "disabled";
};

&serial_0 {
	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
	clock-names = "uart", "clk_uart_baud0";
};

&serial_1 {
	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
	clock-names = "uart", "clk_uart_baud0";
};

&serial_2 {
	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
	clock-names = "uart", "clk_uart_baud0";
};

&serial_3 {
	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
	clock-names = "uart", "clk_uart_baud0";
};

#include "exynos5250-pinctrl.dtsi"