Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 | /****************************************************************************** * usb_halinit.c * * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved. * Linux device driver for RTL8192SU * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * Modifications for inclusion into the Linux staging tree are * Copyright(c) 2010 Larry Finger. All rights reserved. * * Contact information: * WLAN FAE <wlanfae@realtek.com> * Larry Finger <Larry.Finger@lwfinger.net> * ******************************************************************************/ #define _HCI_HAL_INIT_C_ #include "osdep_service.h" #include "drv_types.h" #include "usb_ops.h" #include "usb_osintf.h" u8 r8712_usb_hal_bus_init(struct _adapter *padapter) { u8 val8 = 0; u8 ret = _SUCCESS; int PollingCnt = 20; struct registry_priv *pregistrypriv = &padapter->registrypriv; if (pregistrypriv->chip_version == RTL8712_FPGA) { val8 = 0x01; /* switch to 80M clock */ r8712_write8(padapter, SYS_CLKR, val8); val8 = r8712_read8(padapter, SPS1_CTRL); val8 = val8 | 0x01; /* enable VSPS12 LDO Macro block */ r8712_write8(padapter, SPS1_CTRL, val8); val8 = r8712_read8(padapter, AFE_MISC); val8 = val8 | 0x01; /* Enable AFE Macro Block's Bandgap */ r8712_write8(padapter, AFE_MISC, val8); val8 = r8712_read8(padapter, LDOA15_CTRL); val8 = val8 | 0x01; /* enable LDOA15 block */ r8712_write8(padapter, LDOA15_CTRL, val8); val8 = r8712_read8(padapter, SPS1_CTRL); val8 = val8 | 0x02; /* Enable VSPS12_SW Macro Block */ r8712_write8(padapter, SPS1_CTRL, val8); val8 = r8712_read8(padapter, AFE_MISC); val8 = val8 | 0x02; /* Enable AFE Macro Block's Mbias */ r8712_write8(padapter, AFE_MISC, val8); val8 = r8712_read8(padapter, SYS_ISO_CTRL + 1); val8 = val8 | 0x08; /* isolate PCIe Analog 1.2V to PCIe 3.3V and PCIE Digital */ r8712_write8(padapter, SYS_ISO_CTRL + 1, val8); val8 = r8712_read8(padapter, SYS_ISO_CTRL + 1); val8 = val8 & 0xEF; /* attatch AFE PLL to MACTOP/BB/PCIe Digital */ r8712_write8(padapter, SYS_ISO_CTRL + 1, val8); val8 = r8712_read8(padapter, AFE_XTAL_CTRL + 1); val8 = val8 & 0xFB; /* enable AFE clock */ r8712_write8(padapter, AFE_XTAL_CTRL + 1, val8); val8 = r8712_read8(padapter, AFE_PLL_CTRL); val8 = val8 | 0x01; /* Enable AFE PLL Macro Block */ r8712_write8(padapter, AFE_PLL_CTRL, val8); val8 = 0xEE; /* release isolation AFE PLL & MD */ r8712_write8(padapter, SYS_ISO_CTRL, val8); val8 = r8712_read8(padapter, SYS_CLKR + 1); val8 = val8 | 0x08; /* enable MAC clock */ r8712_write8(padapter, SYS_CLKR + 1, val8); val8 = r8712_read8(padapter, SYS_FUNC_EN + 1); val8 = val8 | 0x08; /* enable Core digital and enable IOREG R/W */ r8712_write8(padapter, SYS_FUNC_EN + 1, val8); val8 = val8 | 0x80; /* enable REG_EN */ r8712_write8(padapter, SYS_FUNC_EN + 1, val8); val8 = r8712_read8(padapter, SYS_CLKR + 1); val8 = (val8 | 0x80) & 0xBF; /* switch the control path */ r8712_write8(padapter, SYS_CLKR + 1, val8); val8 = 0xFC; r8712_write8(padapter, CR, val8); val8 = 0x37; r8712_write8(padapter, CR + 1, val8); /* reduce EndPoint & init it */ r8712_write8(padapter, 0x102500ab, r8712_read8(padapter, 0x102500ab) | BIT(6) | BIT(7)); /* consideration of power consumption - init */ r8712_write8(padapter, 0x10250008, r8712_read8(padapter, 0x10250008) & 0xfffffffb); } else if (pregistrypriv->chip_version == RTL8712_1stCUT) { /* Initialization for power on sequence, */ r8712_write8(padapter, SPS0_CTRL + 1, 0x53); r8712_write8(padapter, SPS0_CTRL, 0x57); /* Enable AFE Macro Block's Bandgap and Enable AFE Macro * Block's Mbias */ val8 = r8712_read8(padapter, AFE_MISC); r8712_write8(padapter, AFE_MISC, (val8 | AFE_MISC_BGEN | AFE_MISC_MBEN)); /* Enable LDOA15 block */ val8 = r8712_read8(padapter, LDOA15_CTRL); r8712_write8(padapter, LDOA15_CTRL, (val8 | LDA15_EN)); val8 = r8712_read8(padapter, SPS1_CTRL); r8712_write8(padapter, SPS1_CTRL, (val8 | SPS1_LDEN)); msleep(20); /* Enable Switch Regulator Block */ val8 = r8712_read8(padapter, SPS1_CTRL); r8712_write8(padapter, SPS1_CTRL, (val8 | SPS1_SWEN)); r8712_write32(padapter, SPS1_CTRL, 0x00a7b267); val8 = r8712_read8(padapter, SYS_ISO_CTRL + 1); r8712_write8(padapter, SYS_ISO_CTRL + 1, (val8 | 0x08)); /* Engineer Packet CP test Enable */ val8 = r8712_read8(padapter, SYS_FUNC_EN + 1); r8712_write8(padapter, SYS_FUNC_EN + 1, (val8 | 0x20)); val8 = r8712_read8(padapter, SYS_ISO_CTRL + 1); r8712_write8(padapter, SYS_ISO_CTRL + 1, (val8 & 0x6F)); /* Enable AFE clock */ val8 = r8712_read8(padapter, AFE_XTAL_CTRL + 1); r8712_write8(padapter, AFE_XTAL_CTRL + 1, (val8 & 0xfb)); /* Enable AFE PLL Macro Block */ val8 = r8712_read8(padapter, AFE_PLL_CTRL); r8712_write8(padapter, AFE_PLL_CTRL, (val8 | 0x11)); /* Attach AFE PLL to MACTOP/BB/PCIe Digital */ val8 = r8712_read8(padapter, SYS_ISO_CTRL); r8712_write8(padapter, SYS_ISO_CTRL, (val8 & 0xEE)); /* Switch to 40M clock */ val8 = r8712_read8(padapter, SYS_CLKR); r8712_write8(padapter, SYS_CLKR, val8 & (~SYS_CLKSEL)); /* SSC Disable */ val8 = r8712_read8(padapter, SYS_CLKR); /* Enable MAC clock */ val8 = r8712_read8(padapter, SYS_CLKR + 1); r8712_write8(padapter, SYS_CLKR + 1, (val8 | 0x18)); /* Revised POS, */ r8712_write8(padapter, PMC_FSM, 0x02); /* Enable Core digital and enable IOREG R/W */ val8 = r8712_read8(padapter, SYS_FUNC_EN + 1); r8712_write8(padapter, SYS_FUNC_EN + 1, (val8 | 0x08)); /* Enable REG_EN */ val8 = r8712_read8(padapter, SYS_FUNC_EN + 1); r8712_write8(padapter, SYS_FUNC_EN + 1, (val8 | 0x80)); /* Switch the control path to FW */ val8 = r8712_read8(padapter, SYS_CLKR + 1); r8712_write8(padapter, SYS_CLKR + 1, (val8 | 0x80) & 0xBF); r8712_write8(padapter, CR, 0xFC); r8712_write8(padapter, CR + 1, 0x37); /* Fix the RX FIFO issue(usb error), */ val8 = r8712_read8(padapter, 0x1025FE5c); r8712_write8(padapter, 0x1025FE5c, (val8 | BIT(7))); val8 = r8712_read8(padapter, 0x102500ab); r8712_write8(padapter, 0x102500ab, (val8 | BIT(6) | BIT(7))); /* For power save, used this in the bit file after 970621 */ val8 = r8712_read8(padapter, SYS_CLKR); r8712_write8(padapter, SYS_CLKR, val8 & (~CPU_CLKSEL)); } else if (pregistrypriv->chip_version == RTL8712_2ndCUT || pregistrypriv->chip_version == RTL8712_3rdCUT) { /* Initialization for power on sequence, * E-Fuse leakage prevention sequence */ r8712_write8(padapter, 0x37, 0xb0); msleep(20); r8712_write8(padapter, 0x37, 0x30); /* Set control path switch to HW control and reset Digital Core, * CPU Core and MAC I/O to solve FW download fail when system * from resume sate. */ val8 = r8712_read8(padapter, SYS_CLKR + 1); if (val8 & 0x80) { val8 &= 0x3f; r8712_write8(padapter, SYS_CLKR + 1, val8); } val8 = r8712_read8(padapter, SYS_FUNC_EN + 1); val8 &= 0x73; r8712_write8(padapter, SYS_FUNC_EN + 1, val8); msleep(20); /* Revised POS, */ /* Enable AFE Macro Block's Bandgap and Enable AFE Macro * Block's Mbias */ r8712_write8(padapter, SPS0_CTRL + 1, 0x53); r8712_write8(padapter, SPS0_CTRL, 0x57); val8 = r8712_read8(padapter, AFE_MISC); /*Bandgap*/ r8712_write8(padapter, AFE_MISC, (val8 | AFE_MISC_BGEN)); r8712_write8(padapter, AFE_MISC, (val8 | AFE_MISC_BGEN | AFE_MISC_MBEN | AFE_MISC_I32_EN)); /* Enable PLL Power (LDOA15V) */ val8 = r8712_read8(padapter, LDOA15_CTRL); r8712_write8(padapter, LDOA15_CTRL, (val8 | LDA15_EN)); /* Enable LDOV12D block */ val8 = r8712_read8(padapter, LDOV12D_CTRL); r8712_write8(padapter, LDOV12D_CTRL, (val8 | LDV12_EN)); val8 = r8712_read8(padapter, SYS_ISO_CTRL + 1); r8712_write8(padapter, SYS_ISO_CTRL + 1, (val8 | 0x08)); /* Engineer Packet CP test Enable */ val8 = r8712_read8(padapter, SYS_FUNC_EN + 1); r8712_write8(padapter, SYS_FUNC_EN + 1, (val8 | 0x20)); /* Support 64k IMEM */ val8 = r8712_read8(padapter, SYS_ISO_CTRL + 1); r8712_write8(padapter, SYS_ISO_CTRL + 1, (val8 & 0x68)); /* Enable AFE clock */ val8 = r8712_read8(padapter, AFE_XTAL_CTRL + 1); r8712_write8(padapter, AFE_XTAL_CTRL + 1, (val8 & 0xfb)); /* Enable AFE PLL Macro Block */ val8 = r8712_read8(padapter, AFE_PLL_CTRL); r8712_write8(padapter, AFE_PLL_CTRL, (val8 | 0x11)); /* Some sample will download fw failure. The clock will be * stable with 500 us delay after reset the PLL * TODO: When usleep is added to kernel, change next 3 * udelay(500) to usleep(500) */ udelay(500); r8712_write8(padapter, AFE_PLL_CTRL, (val8 | 0x51)); udelay(500); r8712_write8(padapter, AFE_PLL_CTRL, (val8 | 0x11)); udelay(500); /* Attach AFE PLL to MACTOP/BB/PCIe Digital */ val8 = r8712_read8(padapter, SYS_ISO_CTRL); r8712_write8(padapter, SYS_ISO_CTRL, (val8 & 0xEE)); /* Switch to 40M clock */ r8712_write8(padapter, SYS_CLKR, 0x00); /* CPU Clock and 80M Clock SSC Disable to overcome FW download * fail timing issue. */ val8 = r8712_read8(padapter, SYS_CLKR); r8712_write8(padapter, SYS_CLKR, (val8 | 0xa0)); /* Enable MAC clock */ val8 = r8712_read8(padapter, SYS_CLKR + 1); r8712_write8(padapter, SYS_CLKR + 1, (val8 | 0x18)); /* Revised POS, */ r8712_write8(padapter, PMC_FSM, 0x02); /* Enable Core digital and enable IOREG R/W */ val8 = r8712_read8(padapter, SYS_FUNC_EN + 1); r8712_write8(padapter, SYS_FUNC_EN + 1, (val8 | 0x08)); /* Enable REG_EN */ val8 = r8712_read8(padapter, SYS_FUNC_EN + 1); r8712_write8(padapter, SYS_FUNC_EN + 1, (val8 | 0x80)); /* Switch the control path to FW */ val8 = r8712_read8(padapter, SYS_CLKR + 1); r8712_write8(padapter, SYS_CLKR + 1, (val8 | 0x80) & 0xBF); r8712_write8(padapter, CR, 0xFC); r8712_write8(padapter, CR + 1, 0x37); /* Fix the RX FIFO issue(usb error), 970410 */ val8 = r8712_read8(padapter, 0x1025FE5c); r8712_write8(padapter, 0x1025FE5c, (val8 | BIT(7))); /* For power save, used this in the bit file after 970621 */ val8 = r8712_read8(padapter, SYS_CLKR); r8712_write8(padapter, SYS_CLKR, val8 & (~CPU_CLKSEL)); /* Revised for 8051 ROM code wrong operation. */ r8712_write8(padapter, 0x1025fe1c, 0x80); /* To make sure that TxDMA can ready to download FW. * We should reset TxDMA if IMEM RPT was not ready. */ do { val8 = r8712_read8(padapter, TCR); if ((val8 & _TXDMA_INIT_VALUE) == _TXDMA_INIT_VALUE) break; udelay(5); /* PlatformStallExecution(5); */ } while (PollingCnt--); /* Delay 1ms */ if (PollingCnt <= 0) { val8 = r8712_read8(padapter, CR); r8712_write8(padapter, CR, val8 & (~_TXDMA_EN)); udelay(2); /* PlatformStallExecution(2); */ /* Reset TxDMA */ r8712_write8(padapter, CR, val8 | _TXDMA_EN); } } else { ret = _FAIL; } return ret; } unsigned int r8712_usb_inirp_init(struct _adapter *padapter) { u8 i; struct recv_buf *precvbuf; struct intf_hdl *pintfhdl = &padapter->pio_queue->intf; struct recv_priv *precvpriv = &(padapter->recvpriv); precvpriv->ff_hwaddr = RTL8712_DMA_RX0FF; /* mapping rx fifo address */ /* issue Rx irp to receive data */ precvbuf = (struct recv_buf *)precvpriv->precv_buf; for (i = 0; i < NR_RECVBUFF; i++) { if (r8712_usb_read_port(pintfhdl, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf) == false) return _FAIL; precvbuf++; precvpriv->free_recv_buf_queue_cnt--; } return _SUCCESS; } unsigned int r8712_usb_inirp_deinit(struct _adapter *padapter) { r8712_usb_read_port_cancel(padapter); return _SUCCESS; } |