Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 | /* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 2011 - 2012 Cavium, Inc. */ #include <linux/module.h> #include <linux/phy.h> #include <linux/of.h> #define PHY_ID_BCM8706 0x0143bdc1 #define PHY_ID_BCM8727 0x0143bff0 #define BCM87XX_PMD_RX_SIGNAL_DETECT (MII_ADDR_C45 | 0x1000a) #define BCM87XX_10GBASER_PCS_STATUS (MII_ADDR_C45 | 0x30020) #define BCM87XX_XGXS_LANE_STATUS (MII_ADDR_C45 | 0x40018) #define BCM87XX_LASI_CONTROL (MII_ADDR_C45 | 0x39002) #define BCM87XX_LASI_STATUS (MII_ADDR_C45 | 0x39005) #if IS_ENABLED(CONFIG_OF_MDIO) /* Set and/or override some configuration registers based on the * broadcom,c45-reg-init property stored in the of_node for the phydev. * * broadcom,c45-reg-init = <devid reg mask value>,...; * * There may be one or more sets of <devid reg mask value>: * * devid: which sub-device to use. * reg: the register. * mask: if non-zero, ANDed with existing register value. * value: ORed with the masked value and written to the regiser. * */ static int bcm87xx_of_reg_init(struct phy_device *phydev) { const __be32 *paddr; const __be32 *paddr_end; int len, ret; if (!phydev->mdio.dev.of_node) return 0; paddr = of_get_property(phydev->mdio.dev.of_node, "broadcom,c45-reg-init", &len); if (!paddr) return 0; paddr_end = paddr + (len /= sizeof(*paddr)); ret = 0; while (paddr + 3 < paddr_end) { u16 devid = be32_to_cpup(paddr++); u16 reg = be32_to_cpup(paddr++); u16 mask = be32_to_cpup(paddr++); u16 val_bits = be32_to_cpup(paddr++); int val; u32 regnum = MII_ADDR_C45 | (devid << 16) | reg; val = 0; if (mask) { val = phy_read(phydev, regnum); if (val < 0) { ret = val; goto err; } val &= mask; } val |= val_bits; ret = phy_write(phydev, regnum, val); if (ret < 0) goto err; } err: return ret; } #else static int bcm87xx_of_reg_init(struct phy_device *phydev) { return 0; } #endif /* CONFIG_OF_MDIO */ static int bcm87xx_config_init(struct phy_device *phydev) { phydev->supported = SUPPORTED_10000baseR_FEC; phydev->advertising = ADVERTISED_10000baseR_FEC; phydev->state = PHY_NOLINK; phydev->autoneg = AUTONEG_DISABLE; bcm87xx_of_reg_init(phydev); return 0; } static int bcm87xx_config_aneg(struct phy_device *phydev) { return -EINVAL; } static int bcm87xx_read_status(struct phy_device *phydev) { int rx_signal_detect; int pcs_status; int xgxs_lane_status; rx_signal_detect = phy_read(phydev, BCM87XX_PMD_RX_SIGNAL_DETECT); if (rx_signal_detect < 0) return rx_signal_detect; if ((rx_signal_detect & 1) == 0) goto no_link; pcs_status = phy_read(phydev, BCM87XX_10GBASER_PCS_STATUS); if (pcs_status < 0) return pcs_status; if ((pcs_status & 1) == 0) goto no_link; xgxs_lane_status = phy_read(phydev, BCM87XX_XGXS_LANE_STATUS); if (xgxs_lane_status < 0) return xgxs_lane_status; if ((xgxs_lane_status & 0x1000) == 0) goto no_link; phydev->speed = 10000; phydev->link = 1; phydev->duplex = 1; return 0; no_link: phydev->link = 0; return 0; } static int bcm87xx_config_intr(struct phy_device *phydev) { int reg, err; reg = phy_read(phydev, BCM87XX_LASI_CONTROL); if (reg < 0) return reg; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) reg |= 1; else reg &= ~1; err = phy_write(phydev, BCM87XX_LASI_CONTROL, reg); return err; } static int bcm87xx_did_interrupt(struct phy_device *phydev) { int reg; reg = phy_read(phydev, BCM87XX_LASI_STATUS); if (reg < 0) { phydev_err(phydev, "Error: Read of BCM87XX_LASI_STATUS failed: %d\n", reg); return 0; } return (reg & 1) != 0; } static int bcm87xx_ack_interrupt(struct phy_device *phydev) { /* Reading the LASI status clears it. */ bcm87xx_did_interrupt(phydev); return 0; } static int bcm8706_match_phy_device(struct phy_device *phydev) { return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8706; } static int bcm8727_match_phy_device(struct phy_device *phydev) { return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8727; } static struct phy_driver bcm87xx_driver[] = { { .phy_id = PHY_ID_BCM8706, .phy_id_mask = 0xffffffff, .name = "Broadcom BCM8706", .features = PHY_10GBIT_FEC_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_init = bcm87xx_config_init, .config_aneg = bcm87xx_config_aneg, .read_status = bcm87xx_read_status, .ack_interrupt = bcm87xx_ack_interrupt, .config_intr = bcm87xx_config_intr, .did_interrupt = bcm87xx_did_interrupt, .match_phy_device = bcm8706_match_phy_device, }, { .phy_id = PHY_ID_BCM8727, .phy_id_mask = 0xffffffff, .name = "Broadcom BCM8727", .features = PHY_10GBIT_FEC_FEATURES, .flags = PHY_HAS_INTERRUPT, .config_init = bcm87xx_config_init, .config_aneg = bcm87xx_config_aneg, .read_status = bcm87xx_read_status, .ack_interrupt = bcm87xx_ack_interrupt, .config_intr = bcm87xx_config_intr, .did_interrupt = bcm87xx_did_interrupt, .match_phy_device = bcm8727_match_phy_device, } }; module_phy_driver(bcm87xx_driver); MODULE_LICENSE("GPL"); |