Loading...
* Amlogic Meson8, Meson8b and GXBB USB2 PHY Required properties: - compatible: Depending on the platform this should be one of: "amlogic,meson8-usb2-phy" "amlogic,meson8b-usb2-phy" "amlogic,meson-gxbb-usb2-phy" - reg: The base address and length of the registers - #phys-cells: should be 0 (see phy-bindings.txt in this directory) - clocks: phandle and clock identifier for the phy clocks - clock-names: "usb_general" and "usb" Optional properties: - resets: reference to the reset controller - phy-supply: see phy-bindings.txt in this directory Example: usb0_phy: usb-phy@c0000000 { compatible = "amlogic,meson-gxbb-usb2-phy"; #phy-cells = <0>; reg = <0x0 0xc0000000 0x0 0x20>; resets = <&reset RESET_USB_OTG>; clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; clock-names = "usb_general", "usb"; phy-supply = <&usb_vbus>; }; |