Loading...
/* DVB USB compliant Linux driver for the * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module * * Copyright (C) 2006 Alan Nisota (alannisota@gmail.com) * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) * * Thanks to GENPIX for the sample code used to implement this module. * * This module is based off the vp7045 and vp702x modules * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * * see Documentation/dvb/README.dvb-usb for more information */ #ifndef _DVB_USB_GP8PSK_H_ #define _DVB_USB_GP8PSK_H_ #define DVB_USB_LOG_PREFIX "gp8psk" #include "dvb-usb.h" extern int dvb_usb_gp8psk_debug; #define deb_info(args...) dprintk(dvb_usb_gp8psk_debug,0x01,args) #define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args) #define deb_rc(args...) dprintk(dvb_usb_gp8psk_debug,0x04,args) #define deb_fe(args...) dprintk(dvb_usb_gp8psk_debug,0x08,args) /* Twinhan Vendor requests */ #define TH_COMMAND_IN 0xC0 #define TH_COMMAND_OUT 0xC1 /* gp8psk commands */ #define GET_8PSK_CONFIG 0x80 /* in */ #define SET_8PSK_CONFIG 0x81 #define I2C_WRITE 0x83 #define I2C_READ 0x84 #define ARM_TRANSFER 0x85 #define TUNE_8PSK 0x86 #define GET_SIGNAL_STRENGTH 0x87 /* in */ #define LOAD_BCM4500 0x88 #define BOOT_8PSK 0x89 /* in */ #define START_INTERSIL 0x8A /* in */ #define SET_LNB_VOLTAGE 0x8B #define SET_22KHZ_TONE 0x8C #define SEND_DISEQC_COMMAND 0x8D #define SET_DVB_MODE 0x8E #define SET_DN_SWITCH 0x8F #define GET_SIGNAL_LOCK 0x90 /* in */ #define GET_FW_VERS 0x92 #define GET_SERIAL_NUMBER 0x93 /* in */ #define USE_EXTRA_VOLT 0x94 #define GET_FPGA_VERS 0x95 #define CW3K_INIT 0x9d /* PSK_configuration bits */ #define bm8pskStarted 0x01 #define bm8pskFW_Loaded 0x02 #define bmIntersilOn 0x04 #define bmDVBmode 0x08 #define bm22kHz 0x10 #define bmSEL18V 0x20 #define bmDCtuned 0x40 #define bmArmed 0x80 /* Satellite modulation modes */ #define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */ #define ADV_MOD_TURBO_QPSK 1 /* Turbo QPSK */ #define ADV_MOD_TURBO_8PSK 2 /* Turbo 8PSK (also used for Trellis 8PSK) */ #define ADV_MOD_TURBO_16QAM 3 /* Turbo 16QAM (also used for Trellis 8PSK) */ #define ADV_MOD_DCII_C_QPSK 4 /* Digicipher II Combo */ #define ADV_MOD_DCII_I_QPSK 5 /* Digicipher II I-stream */ #define ADV_MOD_DCII_Q_QPSK 6 /* Digicipher II Q-stream */ #define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */ #define ADV_MOD_DSS_QPSK 8 /* DSS (DIRECTV) QPSK */ #define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */ #define GET_USB_SPEED 0x07 #define RESET_FX2 0x13 #define FW_VERSION_READ 0x0B #define VENDOR_STRING_READ 0x0C #define PRODUCT_STRING_READ 0x0D #define FW_BCD_VERSION_READ 0x14 /* firmware revision id's */ #define GP8PSK_FW_REV1 0x020604 #define GP8PSK_FW_REV2 0x020704 #define GP8PSK_FW_VERS(_fw_vers) ((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0]) extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d); extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); extern int gp8psk_bcm4500_reload(struct dvb_usb_device *d); #endif |