Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 | /* * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) * * May be copied or modified under the terms of the GNU General Public * License. See linux/COPYING for more information. * * This file contains the I/O routines for use on the overdrive board * */ #include <linux/config.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/delay.h> #include <asm/system.h> #include <asm/processor.h> #include <asm/io.h> /* * readX/writeX() are used to access memory mapped devices. On some * architectures the memory mapped IO stuff needs to be accessed * differently. On the SuperH architecture, we just read/write the * memory location directly. */ /* This is horrible at the moment - needs more work to do something sensible */ #define IO_DELAY() #define OUT_DELAY(x,type) \ void out##x##_p(unsigned type value,unsigned long port){out##x(value,port);IO_DELAY();} #define IN_DELAY(x,type) \ unsigned type in##x##_p(unsigned long port) {unsigned type tmp=in##x(port);IO_DELAY();return tmp;} #if 1 OUT_DELAY(b, long) OUT_DELAY(w, long) OUT_DELAY(l, long) IN_DELAY(b, long) IN_DELAY(w, long) IN_DELAY(l, long) #endif /* Now for the string version of these functions */ void outsb(unsigned long port, const void *addr, unsigned long count) { int i; unsigned char *p = (unsigned char *) addr; for (i = 0; i < count; i++, p++) { outb(*p, port); } } void insb(unsigned long port, void *addr, unsigned long count) { int i; unsigned char *p = (unsigned char *) addr; for (i = 0; i < count; i++, p++) { *p = inb(port); } } /* For the 16 and 32 bit string functions, we have to worry about alignment. * The SH does not do unaligned accesses, so we have to read as bytes and * then write as a word or dword. * This can be optimised a lot more, especially in the case where the data * is aligned */ void outsw(unsigned long port, const void *addr, unsigned long count) { int i; unsigned short tmp; unsigned char *p = (unsigned char *) addr; for (i = 0; i < count; i++, p += 2) { tmp = (*p) | ((*(p + 1)) << 8); outw(tmp, port); } } void insw(unsigned long port, void *addr, unsigned long count) { int i; unsigned short tmp; unsigned char *p = (unsigned char *) addr; for (i = 0; i < count; i++, p += 2) { tmp = inw(port); p[0] = tmp & 0xff; p[1] = (tmp >> 8) & 0xff; } } void outsl(unsigned long port, const void *addr, unsigned long count) { int i; unsigned tmp; unsigned char *p = (unsigned char *) addr; for (i = 0; i < count; i++, p += 4) { tmp = (*p) | ((*(p + 1)) << 8) | ((*(p + 2)) << 16) | ((*(p + 3)) << 24); outl(tmp, port); } } void insl(unsigned long port, void *addr, unsigned long count) { int i; unsigned tmp; unsigned char *p = (unsigned char *) addr; for (i = 0; i < count; i++, p += 4) { tmp = inl(port); p[0] = tmp & 0xff; p[1] = (tmp >> 8) & 0xff; p[2] = (tmp >> 16) & 0xff; p[3] = (tmp >> 24) & 0xff; } } void memcpy_toio(void __iomem *to, const void *from, long count) { unsigned char *p = (unsigned char *) from; while (count) { count--; writeb(*p++, to++); } } void memcpy_fromio(void *to, void __iomem *from, long count) { int i; unsigned char *p = (unsigned char *) to; for (i = 0; i < count; i++) { p[i] = readb(from); from++; } } |