Loading...
/* * include/asm-arm/arch-lh7a40x/entry-macro.S * * Low-level IRQ helper macros for LH7A40x platforms * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ # if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404) # error "LH7A400 and LH7A404 are mutually exclusive" # endif # if defined (CONFIG_ARCH_LH7A400) .macro disable_fiq .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp mov \irqnr, #0 mov \base, #io_p2v(0x80000000) @ APB registers ldr \irqstat, [\base, #0x500] @ PIC INTSR 1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry bcs 1008f @ Bit set; irq found add \irqnr, \irqnr, #1 bne 1001b @ Until no bits b 1009f @ Nothing? Hmm. 1008: movs \irqstat, #1 @ Force !Z 1009: .endm #elif defined(CONFIG_ARCH_LH7A404) .macro disable_fiq .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp mov \irqnr, #0 @ VIC1 irq base mov \base, #io_p2v(0x80000000) @ APB registers add \base, \base, #0x8000 ldr \tmp, [\base, #0x0030] @ VIC1_VECTADDR tst \tmp, #VA_VECTORED @ Direct vectored bne 1002f tst \tmp, #VA_VIC1DEFAULT @ Default vectored VIC1 ldrne \irqstat, [\base, #0] @ VIC1_IRQSTATUS bne 1001f add \base, \base, #(0xa000 - 0x8000) ldr \tmp, [\base, #0x0030] @ VIC2_VECTADDR tst \tmp, #VA_VECTORED @ Direct vectored bne 1002f ldr \irqstat, [\base, #0] @ VIC2_IRQSTATUS mov \irqnr, #32 @ VIC2 irq base 1001: movs \irqstat, \irqstat, lsr #1 @ Shift into carry bcs 1008f @ Bit set; irq found add \irqnr, \irqnr, #1 bne 1001b @ Until no bits b 1009f @ Nothing? Hmm. 1002: and \irqnr, \tmp, #0x3f @ Mask for valid bits 1008: movs \irqstat, #1 @ Force !Z str \tmp, [\base, #0x0030] @ Clear vector 1009: .endm #endif |