Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 | /* * arch/ppc/platforms/4xx/ibmstbx25.h * * Author: Armin Kuster <akuster@mvista.com> * * 2002 (c) MontaVista, Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. */ #ifdef __KERNEL__ #ifndef __ASM_IBMSTBX25_H__ #define __ASM_IBMSTBX25_H__ #include <linux/config.h> /* serial port defines */ #define STBx25xx_IO_BASE ((uint)0xe0000000) #define PPC4xx_ONB_IO_PADDR STBx25xx_IO_BASE #define PPC4xx_ONB_IO_VADDR ((uint)0xe0000000) #define PPC4xx_ONB_IO_SIZE ((uint)14*64*1024) /* * map STBxxxx internal i/o address (0x400x00xx) to an address * which is below the 2GB limit... * * 4000 000x uart1 -> 0xe000 000x * 4001 00xx uart2 * 4002 00xx smart card * 4003 000x iic * 4004 000x uart0 * 4005 0xxx timer * 4006 00xx gpio * 4007 00xx smart card * 400b 000x iic * 400c 000x scp * 400d 000x modem * 400e 000x uart2 */ #define STBx25xx_MAP_IO_ADDR(a) (((uint)(a)) + (STBx25xx_IO_BASE - 0x40000000)) #define RS_TABLE_SIZE 3 #define OPB_BASE_START 0x40000000 #define EBIU_BASE_START 0xF0100000 #define DCR_BASE_START 0x0000 #ifdef __BOOTER__ #define UART1_IO_BASE 0x40000000 #define UART2_IO_BASE 0x40010000 #else #define UART1_IO_BASE 0xe0000000 #define UART2_IO_BASE 0xe0010000 #endif #define SC0_BASE 0x40020000 /* smart card #0 */ #define IIC0_BASE 0x40030000 #ifdef __BOOTER__ #define UART0_IO_BASE 0x40040000 #else #define UART0_IO_BASE 0xe0040000 #endif #define SCC0_BASE 0x40040000 /* Serial 0 controller IrdA */ #define GPT0_BASE 0x40050000 /* General purpose timers */ #define GPIO0_BASE 0x40060000 #define SC1_BASE 0x40070000 /* smart card #1 */ #define SCP0_BASE 0x400C0000 /* Serial Controller Port */ #define SSP0_BASE 0x400D0000 /* Sync serial port */ #define IDE0_BASE 0xf0100000 #define REDWOOD_IDE_CTRL 0xf1100000 #define RTCFPC_IRQ 0 #define XPORT_IRQ 1 #define AUD_IRQ 2 #define AID_IRQ 3 #define DMA0 4 #define DMA1_IRQ 5 #define DMA2_IRQ 6 #define DMA3_IRQ 7 #define SC0_IRQ 8 #define IIC0_IRQ 9 #define IIR0_IRQ 10 #define GPT0_IRQ 11 #define GPT1_IRQ 12 #define SCP0_IRQ 13 #define SSP0_IRQ 14 #define GPT2_IRQ 15 /* count down timer */ #define SC1_IRQ 16 /* IRQ 17 - 19 external */ #define UART0_INT 20 #define UART1_INT 21 #define UART2_INT 22 #define XPTDMA_IRQ 23 #define DCRIDE_IRQ 24 /* IRQ 25 - 30 external */ #define IDE0_IRQ 26 #define IIC_NUMS 1 #define UART_NUMS 3 #define IIC_OWN 0x55 #define IIC_CLOCK 50 #define BD_EMAC_ADDR(e,i) bi_enetaddr[i] #define STD_UART_OP(num) \ { 0, BASE_BAUD, 0, UART##num##_INT, \ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ iomem_base: (u8 *)UART##num##_IO_BASE, \ io_type: SERIAL_IO_MEM}, #if defined(CONFIG_UART0_TTYS0) #define SERIAL_DEBUG_IO_BASE UART0_IO_BASE #define SERIAL_PORT_DFNS \ STD_UART_OP(0) \ STD_UART_OP(1) \ STD_UART_OP(2) #endif #if defined(CONFIG_UART0_TTYS1) #define SERIAL_DEBUG_IO_BASE UART2_IO_BASE #define SERIAL_PORT_DFNS \ STD_UART_OP(1) \ STD_UART_OP(0) \ STD_UART_OP(2) #endif #if defined(CONFIG_UART0_TTYS2) #define SERIAL_DEBUG_IO_BASE UART2_IO_BASE #define SERIAL_PORT_DFNS \ STD_UART_OP(2) \ STD_UART_OP(0) \ STD_UART_OP(1) #endif #define DCRN_BE_BASE 0x090 #define DCRN_DMA0_BASE 0x0C0 #define DCRN_DMA1_BASE 0x0C8 #define DCRN_DMA2_BASE 0x0D0 #define DCRN_DMA3_BASE 0x0D8 #define DCRNCAP_DMA_CC 1 /* have DMA chained count capability */ #define DCRN_DMASR_BASE 0x0E0 #define DCRN_PLB0_BASE 0x054 #define DCRN_PLB1_BASE 0x064 #define DCRN_POB0_BASE 0x0B0 #define DCRN_SCCR_BASE 0x120 #define DCRN_UIC0_BASE 0x040 #define DCRN_BE_BASE 0x090 #define DCRN_DMA0_BASE 0x0C0 #define DCRN_DMA1_BASE 0x0C8 #define DCRN_DMA2_BASE 0x0D0 #define DCRN_DMA3_BASE 0x0D8 #define DCRN_CIC_BASE 0x030 #define DCRN_DMASR_BASE 0x0E0 #define DCRN_EBIMC_BASE 0x070 #define DCRN_DCRX_BASE 0x020 #define DCRN_CPMFR_BASE 0x102 #define DCRN_SCCR_BASE 0x120 #define DCRN_RTCFP_BASE 0x310 #define UIC0 DCRN_UIC0_BASE #define IBM_CPM_IIC0 0x80000000 /* IIC 0 interface */ #define IBM_CPM_CPU 0x10000000 /* PPC405B3 clock control */ #define IBM_CPM_AUD 0x08000000 /* Audio Decoder */ #define IBM_CPM_EBIU 0x04000000 /* External Bus Interface Unit */ #define IBM_CPM_IRR 0x02000000 /* Infrared receiver */ #define IBM_CPM_DMA 0x01000000 /* DMA controller */ #define IBM_CPM_UART2 0x00200000 /* Serial Control Port */ #define IBM_CPM_UART1 0x00100000 /* Serial 1 / Infrared */ #define IBM_CPM_UART0 0x00080000 /* Serial 0 / 16550 */ #define IBM_PM_DCRIDE 0x00040000 /* DCR timeout & IDE line Mode clock */ #define IBM_CPM_SC0 0x00020000 /* Smart Card 0 */ #define IBM_CPM_VID 0x00010000 /* reserved */ #define IBM_CPM_SC1 0x00008000 /* Smart Card 0 */ #define IBM_CPM_XPT0 0x00002000 /* Transport - 54 Mhz */ #define IBM_CPM_CBS 0x00001000 /* Cross Bar Switch */ #define IBM_CPM_GPT 0x00000800 /* GPTPWM */ #define IBM_CPM_GPIO0 0x00000400 /* General Purpose IO 0 */ #define IBM_CPM_DENC 0x00000200 /* Digital video Encoder */ #define IBM_CPM_C405T 0x00000100 /* CPU timers */ #define IBM_CPM_XPT27 0x00000080 /* Transport - 27 Mhz */ #define IBM_CPM_UIC 0x00000040 /* Universal Interrupt Controller */ #define IBM_CPM_RTCFPC 0x00000020 /* Realtime clock and front panel */ #define IBM_CPM_SSP 0x00000010 /* Modem Serial Interface (SSP) */ #define IBM_CPM_VID2 0x00000002 /* Video Decoder clock domain 2 */ #define DFLT_IBM4xx_PM ~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_DMA \ | IBM_CPM_CBS | IBM_CPM_XPT0 | IBM_CPM_C405T \ | IBM_CPM_XPT27 | IBM_CPM_UIC) #define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */ #define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register */ /* DCRN_BESR */ #define BESR_DSES 0x80000000 /* Data-Side Error Status */ #define BESR_DMES 0x40000000 /* DMA Error Status */ #define BESR_RWS 0x20000000 /* Read/Write Status */ #define BESR_ETMASK 0x1C000000 /* Error Type */ #define ET_PROT 0 #define ET_PARITY 1 #define ET_NCFG 2 #define ET_BUSERR 4 #define ET_BUSTO 6 #define CHR1_CETE 0x00800000 /* CPU external timer enable */ #define CHR1_PCIPW 0x00008000 /* PCI Int enable/Peripheral Write enable */ #define DCRN_CICCR (DCRN_CIC_BASE + 0x0) /* CIC Control Register */ #define DCRN_DMAS1 (DCRN_CIC_BASE + 0x1) /* DMA Select1 Register */ #define DCRN_DMAS2 (DCRN_CIC_BASE + 0x2) /* DMA Select2 Register */ #define DCRN_CICVCR (DCRN_CIC_BASE + 0x3) /* CIC Video COntro Register */ #define DCRN_CICSEL3 (DCRN_CIC_BASE + 0x5) /* CIC Select 3 Register */ #define DCRN_SGPO (DCRN_CIC_BASE + 0x6) /* CIC GPIO Output Register */ #define DCRN_SGPOD (DCRN_CIC_BASE + 0x7) /* CIC GPIO OD Register */ #define DCRN_SGPTC (DCRN_CIC_BASE + 0x8) /* CIC GPIO Tristate Ctrl Reg */ #define DCRN_SGPI (DCRN_CIC_BASE + 0x9) /* CIC GPIO Input Reg */ #define DCRN_DCRXICR (DCRN_DCRX_BASE + 0x0) /* Internal Control Register */ #define DCRN_DCRXISR (DCRN_DCRX_BASE + 0x1) /* Internal Status Register */ #define DCRN_DCRXECR (DCRN_DCRX_BASE + 0x2) /* External Control Register */ #define DCRN_DCRXESR (DCRN_DCRX_BASE + 0x3) /* External Status Register */ #define DCRN_DCRXTAR (DCRN_DCRX_BASE + 0x4) /* Target Address Register */ #define DCRN_DCRXTDR (DCRN_DCRX_BASE + 0x5) /* Target Data Register */ #define DCRN_DCRXIGR (DCRN_DCRX_BASE + 0x6) /* Interrupt Generation Register */ #define DCRN_DCRXBCR (DCRN_DCRX_BASE + 0x7) /* Line Buffer Control Register */ #define DCRN_BRCRH0 (DCRN_EBIMC_BASE + 0x0) /* Bus Region Config High 0 */ #define DCRN_BRCRH1 (DCRN_EBIMC_BASE + 0x1) /* Bus Region Config High 1 */ #define DCRN_BRCRH2 (DCRN_EBIMC_BASE + 0x2) /* Bus Region Config High 2 */ #define DCRN_BRCRH3 (DCRN_EBIMC_BASE + 0x3) /* Bus Region Config High 3 */ #define DCRN_BRCRH4 (DCRN_EBIMC_BASE + 0x4) /* Bus Region Config High 4 */ #define DCRN_BRCRH5 (DCRN_EBIMC_BASE + 0x5) /* Bus Region Config High 5 */ #define DCRN_BRCRH6 (DCRN_EBIMC_BASE + 0x6) /* Bus Region Config High 6 */ #define DCRN_BRCRH7 (DCRN_EBIMC_BASE + 0x7) /* Bus Region Config High 7 */ #define DCRN_BRCR0 (DCRN_EBIMC_BASE + 0x10) /* BRC 0 */ #define DCRN_BRCR1 (DCRN_EBIMC_BASE + 0x11) /* BRC 1 */ #define DCRN_BRCR2 (DCRN_EBIMC_BASE + 0x12) /* BRC 2 */ #define DCRN_BRCR3 (DCRN_EBIMC_BASE + 0x13) /* BRC 3 */ #define DCRN_BRCR4 (DCRN_EBIMC_BASE + 0x14) /* BRC 4 */ #define DCRN_BRCR5 (DCRN_EBIMC_BASE + 0x15) /* BRC 5 */ #define DCRN_BRCR6 (DCRN_EBIMC_BASE + 0x16) /* BRC 6 */ #define DCRN_BRCR7 (DCRN_EBIMC_BASE + 0x17) /* BRC 7 */ #define DCRN_BEAR0 (DCRN_EBIMC_BASE + 0x20) /* Bus Error Address Register */ #define DCRN_BESR0 (DCRN_EBIMC_BASE + 0x21) /* Bus Error Status Register */ #define DCRN_BIUCR (DCRN_EBIMC_BASE + 0x2A) /* Bus Interfac Unit Ctrl Reg */ #define DCRN_RTC_FPC0_CNTL (DCRN_RTCFP_BASE + 0x00) /* RTC cntl */ #define DCRN_RTC_FPC0_INT (DCRN_RTCFP_BASE + 0x01) /* RTC Interrupt */ #define DCRN_RTC_FPC0_TIME (DCRN_RTCFP_BASE + 0x02) /* RTC time reg */ #define DCRN_RTC_FPC0_ALRM (DCRN_RTCFP_BASE + 0x03) /* RTC Alarm reg */ #define DCRN_RTC_FPC0_D1 (DCRN_RTCFP_BASE + 0x04) /* LED Data 1 */ #define DCRN_RTC_FPC0_D2 (DCRN_RTCFP_BASE + 0x05) /* LED Data 2 */ #define DCRN_RTC_FPC0_D3 (DCRN_RTCFP_BASE + 0x06) /* LED Data 3 */ #define DCRN_RTC_FPC0_D4 (DCRN_RTCFP_BASE + 0x07) /* LED Data 4 */ #define DCRN_RTC_FPC0_D5 (DCRN_RTCFP_BASE + 0x08) /* LED Data 5 */ #define DCRN_RTC_FPC0_FCNTL (DCRN_RTCFP_BASE + 0x09) /* LED control */ #define DCRN_RTC_FPC0_BRT (DCRN_RTCFP_BASE + 0x0A) /* Brightness cntl */ #include <asm/ibm405.h> #endif /* __ASM_IBMSTBX25_H__ */ #endif /* __KERNEL__ */ |