Linux Audio

Check our new training course

Embedded Linux Audio

Check our new training course
with Creative Commons CC-BY-SA
lecture materials

Bootlin logo

Elixir Cross Referencer

Loading...
   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
/******************************************************************************
 *
 * Name:	skgesirq.c
 * Project:	GEnesis, PCI Gigabit Ethernet Adapter
 * Version:	$Revision: 1.49 $
 * Date:	$Date: 1999/12/17 11:02:50 $
 * Purpose:	Special IRQ module
 *
 ******************************************************************************/

/******************************************************************************
 *
 *	(C)Copyright 1998,1999 SysKonnect,
 *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
 *
 *	This program is free software; you can redistribute it and/or modify
 *	it under the terms of the GNU General Public License as published by
 *	the Free Software Foundation; either version 2 of the License, or
 *	(at your option) any later version.
 *
 *	The information in this file is provided "AS IS" without warranty.
 *
 ******************************************************************************/

/******************************************************************************
 *
 * History:
 *
 *	$Log: skgesirq.c,v $
 *	Revision 1.49  1999/12/17 11:02:50  gklug
 *	fix: read PHY_STAT of Broadcom chip more often to assure good status
 *	
 *	Revision 1.48  1999/12/06 10:01:17  cgoos
 *	Added SET function for Role.
 *	
 *	Revision 1.47  1999/11/22 13:34:24  cgoos
 *	Changed license header to GPL.
 *	
 *	Revision 1.46  1999/09/16 10:30:07  cgoos
 *	Removed debugging output statement from Linux.
 *	
 *	Revision 1.45  1999/09/16 07:32:55  cgoos
 *	Fixed dual-port copperfield bug (PHY_READ from resetted port).
 *	Removed some unused variables.
 *	
 *	Revision 1.44  1999/08/03 15:25:04  cgoos
 *	Removed workaround for disabled interrupts in half duplex mode.
 *	
 *	Revision 1.43  1999/08/03 14:27:58  cgoos
 *	Removed SENSE mode code from SkGePortCheckUpBcom.
 *	
 *	Revision 1.42  1999/07/26 09:16:54  cgoos
 *	Added some typecasts to avoid compiler warnings.
 *	
 *	Revision 1.41  1999/05/19 07:28:59  cgoos
 *	Changes for 1000Base-T.
 *	
 *	Revision 1.40  1999/04/08 13:59:39  gklug
 *	fix: problem with 3Com switches endless RESTARTs
 *	
 *	Revision 1.39  1999/03/08 10:10:52  gklug
 *	fix: AutoSensing did switch to next mode even if LiPa indicated offline
 *	
 *	Revision 1.38  1999/03/08 09:49:03  gklug
 *	fix: Bug using pAC instead of IoC, causing AIX problems
 *	fix: change compare for Linux compiler bug workaround
 *	
 *	Revision 1.37  1999/01/28 14:51:33  gklug
 *	fix: monitor for autosensing and extra RESETS the RX on wire counters
 *	
 *	Revision 1.36  1999/01/22 09:19:55  gklug
 *	fix: Init DupMode and InitPauseMd are now called in RxTxEnable
 *	
 *	Revision 1.35  1998/12/11 15:22:59  gklug
 *	chg: autosensing: check for receive if manual mode was guessed
 *	chg: simplified workaround for XMAC errata
 *	chg: wait additional 100 ms before link goes up.
 *	chg: autoneg timeout to 600 ms
 *	chg: restart autoneg even if configured to autonegotiation
 *	
 *	Revision 1.34  1998/12/10 10:33:14  gklug
 *	add: more debug messages
 *	fix: do a new InitPhy if link went down (AutoSensing problem)
 *	chg: Check for zero shorts if link is NOT up
 *	chg: reset Port if link goes down
 *	chg: wait additional 100 ms when link comes up to check shorts
 *	fix: dummy read extended autoneg status to prevent link going down immediately
 *	
 *	Revision 1.33  1998/12/07 12:18:29  gklug
 *	add: refinement of autosense mode: take into account the autoneg cap of LiPa
 *	
 *	Revision 1.32  1998/12/07 07:11:21  gklug
 *	fix: compiler warning
 *	
 *	Revision 1.31  1998/12/02 09:29:05  gklug
 *	fix: WA XMAC Errata: FCSCt check was not correct.
 *	fix: WA XMAC Errata: Prec Counter were NOT updated in case of short checks.
 *	fix: Clear Stat : now clears the Prev counters of all known Ports
 *	
 *	Revision 1.30  1998/12/01 10:54:15  gklug
 *	dd: workaround for XMAC errata changed. Check RX count and CRC err Count, too.
 *	
 *	Revision 1.29  1998/12/01 10:01:53  gklug
 *	fix: if MAC IRQ occurs during port down, this will be handled correctly
 *	
 *	Revision 1.28  1998/11/26 16:22:11  gklug
 *	fix: bug in autosense if manual modes are used
 *	
 *	Revision 1.27  1998/11/26 15:50:06  gklug
 *	fix: PNMI needs to set PLinkModeConf
 *	
 *	Revision 1.26  1998/11/26 14:51:58  gklug
 *	add: AutoSensing functionalty
 *	
 *	Revision 1.25  1998/11/26 07:34:37  gklug
 *	fix: Init PrevShorts when restarting port due to Link connection
 *	
 *	Revision 1.24  1998/11/25 10:57:32  gklug
 *	fix: remove unreferenced local vars
 *	
 *	Revision 1.23  1998/11/25 08:26:40  gklug
 *	fix: don't do a RESET on a starting or stopping port
 *	
 *	Revision 1.22  1998/11/24 13:29:44  gklug
 *	add: Workaround for MAC parity errata
 *	
 *	Revision 1.21  1998/11/18 15:31:06  gklug
 *	fix: lint bugs
 *	
 *	Revision 1.20  1998/11/18 12:58:54  gklug
 *	fix: use PNMI query instead of hardware access
 *	
 *	Revision 1.19  1998/11/18 12:54:55  gklug
 *	chg: add new workaround for XMAC Errata
 *	add: short event counter monitoring on active link too
 *	
 *	Revision 1.18  1998/11/13 14:27:41  malthoff
 *	Bug Fix: Packet Arbiter Timeout was not cleared correctly
 *	for timeout on TX1 and TX2.
 *	
 *	Revision 1.17  1998/11/04 07:01:59  cgoos
 *	Moved HW link poll sequence.
 *	Added call to SkXmRxTxEnable.
 *	
 *	Revision 1.16  1998/11/03 13:46:03  gklug
 *	add: functionality of SET_LMODE and SET_FLOW_MODE
 *	fix: send RLMT LinkDown event when Port stop is given with LinkUp
 *	
 *	Revision 1.15  1998/11/03 12:56:47  gklug
 *	fix: Needs more events
 *	
 *	Revision 1.14  1998/10/30 07:36:35  gklug
 *	rmv: unnecessary code
 *	
 *	Revision 1.13  1998/10/29 15:21:57  gklug
 *	add: Poll link feature for activating HW link
 *	fix: Deactivate HWLink when Port STOP is given
 *	
 *	Revision 1.12  1998/10/28 07:38:57  cgoos
 *	Checking link status at begin of SkHWLinkUp.
 *	
 *	Revision 1.11  1998/10/22 09:46:50  gklug
 *	fix SysKonnectFileId typo
 *	
 *	Revision 1.10  1998/10/14 13:57:47  gklug
 *	add: Port start/stop event
 *	
 *	Revision 1.9  1998/10/14 05:48:29  cgoos
 *	Added definition for Para.
 *	
 *	Revision 1.8  1998/10/14 05:40:09  gklug
 *	add: Hardware Linkup signal used
 *	
 *	Revision 1.7  1998/10/09 06:50:20  malthoff
 *	Remove ID_sccs by SysKonnectFileId.
 *
 *	Revision 1.6  1998/10/08 09:11:49  gklug
 *	add: clear IRQ commands
 *	
 *	Revision 1.5  1998/10/02 14:27:35  cgoos
 *	Fixed some typos and wrong event names.
 *	
 *	Revision 1.4  1998/10/02 06:24:17  gklug
 *	add: HW error function
 *	fix: OUT macros
 *	
 *	Revision 1.3  1998/10/01 07:03:00  gklug
 *	add: ISR for the usual interrupt source register
 *	
 *	Revision 1.2  1998/09/03 13:50:33  gklug
 *	add: function prototypes
 *	
 *	Revision 1.1  1998/08/27 11:50:21  gklug
 *	initial revision
 *	
 *
 *
 ******************************************************************************/


/*
	Special Interrupt handler

	The following abstract should show how this module is included
	in the driver path:

	In the ISR of the driver the bits for frame transmission complete and
	for receive complete are checked and handled by the driver itself.
	The bits of the slow path mask are checked after this and then the
	entry into the so-called "slow path" is prepared. It is an implemetors
	decision whether this is executed directly or just scheduled by
	disabling the mask. In the interrupt service routine events may be
	generated, so it would be a good idea to call the EventDispatcher
	right after this ISR.

	The Interrupt service register of the adapter is NOT read by this
	module. SO if the drivers implemetor needs a while loop around the
	slow data paths Interrupt bits, he needs to call the SkGeIsr() for
	each loop entered.

	However, the XMAC Interrupt status registers are read in a while loop.

*/
static const char SysKonnectFileId[] =
	"$Id: skgesirq.c,v 1.49 1999/12/17 11:02:50 gklug Exp $" ;

#include "h/skdrv1st.h"		/* Driver Specific Definitions */
#include "h/skgepnmi.h"		/* PNMI Definitions */
#include "h/skrlmt.h"		/* RLMT Definitions */
#include "h/skdrv2nd.h"		/* Adapter Control- and Driver specific Def. */


/* local function prototypes */
static int	SkGePortCheckUpXmac(SK_AC*, SK_IOC, int);
static int	SkGePortCheckUpBcom(SK_AC*, SK_IOC, int);
static int	SkGePortCheckUpLone(SK_AC*, SK_IOC, int);
static int	SkGePortCheckUpNat(SK_AC*, SK_IOC, int);
static void	SkPhyIsrBcom(SK_AC*, SK_IOC, int, SK_U16);
static void	SkPhyIsrLone(SK_AC*, SK_IOC, int, SK_U16);


#ifdef __C2MAN__
/*
	Special IRQ function

	General Description:

 */
intro()
{}
#endif

/*
 * Define return codes of SkGePortCheckUp and CheckShort
 */
#define	SK_HW_PS_NONE		0	/* No action needed */
#define	SK_HW_PS_RESTART	1	/* Restart needed */
#define	SK_HW_PS_LINK		2	/* Link Up actions needed */

/******************************************************************************
 *
 *	SkHWInitDefSense() - Default Autosensing mode initialization
 *
 * Description:
 *	This function handles the Hardware link down signal
 *
 * Note:
 *
 */
void	SkHWInitDefSense(
SK_AC	*pAC,		/* adapter context */
SK_IOC	IoC,		/* IO context */
int	Port)		/* Port Index (MAC_1 + n) */
{
	SK_GEPORT	*pPrt;

	pPrt = &pAC->GIni.GP[Port] ;

	pPrt->PAutoNegTimeOut = 0;

	if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) {
		pPrt->PLinkMode = pPrt->PLinkModeConf;
		return;
	}

	SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_IRQ,
		("AutoSensing: First mode %d on Port %d\n",
		(int) SK_LMODE_AUTOFULL,
		 Port));

	pPrt->PLinkMode = SK_LMODE_AUTOFULL;

	return;
}

/******************************************************************************
 *
 *	SkHWSenseGetNext() - GetNextAutosensing Mode
 *
 * Description:
 *	This function handles the AutoSensing
 *
 * Note:
 *
 */
SK_U8	SkHWSenseGetNext(
SK_AC	*pAC,		/* adapter context */
SK_IOC	IoC,		/* IO context */
int	Port)		/* Port Index (MAC_1 + n) */
{
	SK_GEPORT	*pPrt;

	pPrt = &pAC->GIni.GP[Port] ;

	pPrt->PAutoNegTimeOut = 0;

	if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) {
		/* Leave all as configured */
		return(pPrt->PLinkModeConf);
	}

	if (pPrt->PLinkMode == SK_LMODE_AUTOFULL) {
		/* Return next mode AUTOBOTH */
		return(SK_LMODE_AUTOBOTH);
	}

	/* Return default autofull */
	return(SK_LMODE_AUTOFULL);
}

/******************************************************************************
 *
 *	SkHWSenseSetNext() - Autosensing Set next mode
 *
 * Description:
 *	This function sets the appropriate next mode.
 *
 * Note:
 *
 */
void	SkHWSenseSetNext(
SK_AC	*pAC,		/* adapter context */
SK_IOC	IoC,		/* IO context */
int	Port,		/* Port Index (MAC_1 + n) */
SK_U8	NewMode)	/* New Mode to be written in sense mode */
{
	SK_GEPORT	*pPrt;

	pPrt = &pAC->GIni.GP[Port] ;

	pPrt->PAutoNegTimeOut = 0;

	if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) {
		return;
	}

	SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_IRQ,
		("AutoSensing: next mode %d on Port %d\n", (int) NewMode,
		 Port));
	pPrt->PLinkMode = NewMode;

	return;
}

/******************************************************************************
 *
 *	SkHWLinkDown() - Link Down handling
 *
 * Description:
 *	This function handles the Hardware link down signal
 *
 * Note:
 *
 */
void	SkHWLinkDown(
SK_AC	*pAC,		/* adapter context */
SK_IOC	IoC,		/* IO context */
int	Port)		/* Port Index (MAC_1 + n) */
{
	SK_GEPORT	*pPrt;
	SK_U16		Word;

	pPrt = &pAC->GIni.GP[Port] ;

	/* Disable all XMAC interrupts */
	XM_OUT16(IoC, Port, XM_IMSK, 0xffff);

	/* Disable Receive and Transmitter */
	XM_IN16(IoC, Port, XM_MMU_CMD, &Word);
	XM_OUT16(IoC, Port, XM_MMU_CMD, Word & ~(XM_MMU_ENA_RX|XM_MMU_ENA_TX));
	
	/* disable all PHY interrupts */
	switch (pAC->GIni.GP[Port].PhyType) {
		case SK_PHY_BCOM:
			PHY_WRITE(IoC, pPrt, Port, PHY_BCOM_INT_MASK, 
				0xffff);
			break;
		case SK_PHY_LONE:
			PHY_WRITE(IoC, pPrt, Port, PHY_LONE_INT_ENAB, 
				0x0);
			break;
		case SK_PHY_NAT:
			/* todo: National
			PHY_WRITE(IoC, pPrt, Port, PHY_NAT_INT_MASK, 
				0xffff); */
			break;
	}

	/* Init default sense mode */
	SkHWInitDefSense(pAC, IoC, Port);

	if (!pPrt->PHWLinkUp) {
		return;
	} 

	SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_IRQ,
		("Link down Port %d\n", Port));

	/* Set Link to DOWN */
	pPrt->PHWLinkUp = SK_FALSE;

	/* Reset Port stati */
	pPrt->PLinkModeStatus = SK_LMODE_STAT_UNKNOWN;
	pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE ;

	/*
	 * Reinit Phy especially when the AutoSense default is set now
	 */
	SkXmInitPhy(pAC, IoC, Port, SK_FALSE);

	/*
	 * GP0: used for workaround of Rev. C
	 * Errata 2
	 */

	/* Do NOT signal to RLMT */

	/* Do NOT start the timer here */
}

/******************************************************************************
 *
 *	SkHWLinkUp() - Link Up handling
 *
 * Description:
 *	This function handles the Hardware link up signal
 *
 * Note:
 *
 */
void	SkHWLinkUp(
SK_AC	*pAC,		/* adapter context */
SK_IOC	IoC,		/* IO context */
int	Port)		/* Port Index (MAC_1 + n) */
{
	SK_GEPORT	*pPrt;

	pPrt = &pAC->GIni.GP[Port] ;

	if (pPrt->PHWLinkUp) {
		/* We do NOT need to proceed on active link */
		return;
	} 

	pPrt->PHWLinkUp = SK_TRUE ;
	pPrt->PAutoNegFail = SK_FALSE ;
	pPrt->PLinkModeStatus = SK_LMODE_STAT_UNKNOWN;

	if (pPrt->PLinkMode != SK_LMODE_AUTOHALF &&
	    pPrt->PLinkMode != SK_LMODE_AUTOFULL &&
	    pPrt->PLinkMode != SK_LMODE_AUTOBOTH) {
		/* Link is up and no Autonegotiation should be done */

		/* Configure Port */

		/* Set Link Mode */
		if (pPrt->PLinkMode == SK_LMODE_FULL) {
			pPrt->PLinkModeStatus = SK_LMODE_STAT_FULL;
		} else {
			pPrt->PLinkModeStatus = SK_LMODE_STAT_HALF;
		}

		/* No flow control without autonegotiation */
		pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE ;

		/* RX/TX enable */
		SkXmRxTxEnable(pAC, IoC, Port);
	}
}

/******************************************************************************
 *
 * SkMacParity	- does everything to handle MAC parity errors correctly
 *
 */
static	void	SkMacParity(
SK_AC	*pAC,		/* adapter context */
SK_IOC	IoC,		/* IO context */
int	Port)		/* Port Index of the port failed */
{
	SK_EVPARA	Para;
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
	SK_U64		TxMax;		/* TxMax Counter */
	unsigned int	Len;

	pPrt = &pAC->GIni.GP[Port];

	/* Clear IRQ */
	SK_OUT16(IoC, MR_ADDR(Port,TX_MFF_CTRL1), MFF_CLR_PERR) ;

	if (pPrt->PCheckPar) {
		if (Port == MAC_1) {
			SK_ERR_LOG(pAC, SK_ERRCL_HW , SKERR_SIRQ_E016,
				SKERR_SIRQ_E016MSG) ;
		} else {
			SK_ERR_LOG(pAC, SK_ERRCL_HW , SKERR_SIRQ_E017,
				SKERR_SIRQ_E017MSG) ;
		}
		Para.Para64 = Port;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
		Para.Para32[0] = Port;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);

		return;
	}


	/* Check whether frames with a size of 1k were sent */
	Len = sizeof(SK_U64);
	SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_MAX, (char *) &TxMax,
		&Len, (SK_U32) SK_PNMI_PORT_PHYS2INST(Port));

	if (TxMax > 0) {
		/* From now on check the parity */
		pPrt->PCheckPar = SK_TRUE;
	}
}

/******************************************************************************
 *
 *	Hardware Error service routine
 *
 * Description:
 *
 * Notes:
 */
static	void	SkGeHwErr(
SK_AC	*pAC,		/* adapter context */
SK_IOC	IoC,		/* IO context */
SK_U32	HwStatus)	/* Interrupt status word */
{
	SK_EVPARA	Para;

	if (HwStatus & IS_IRQ_STAT) {
		SK_ERR_LOG(pAC, SK_ERRCL_HW , SKERR_SIRQ_E013,
			SKERR_SIRQ_E013MSG) ;
		Para.Para64 = 0;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
	}

	if (HwStatus & IS_IRQ_MST_ERR) {
		SK_ERR_LOG(pAC, SK_ERRCL_HW , SKERR_SIRQ_E012,
			SKERR_SIRQ_E012MSG) ;
		Para.Para64 = 0;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
	}

	if (HwStatus & IS_NO_STAT_M1) {
		/* Ignore it */
		/* This situation is also indicated in the descriptor */
		SK_OUT16(IoC, MR_ADDR(MAC_1,RX_MFF_CTRL1), MFF_CLR_INSTAT) ;
	}

	if (HwStatus & IS_NO_STAT_M2) {
		/* Ignore it */
		/* This situation is also indicated in the descriptor */
		SK_OUT16(IoC, MR_ADDR(MAC_2,RX_MFF_CTRL1), MFF_CLR_INSTAT) ;
	}

	if (HwStatus & IS_NO_TIST_M1) {
		/* Ignore it */
		/* This situation is also indicated in the descriptor */
		SK_OUT16(IoC, MR_ADDR(MAC_1,RX_MFF_CTRL1), MFF_CLR_INTIST) ;
	}

	if (HwStatus & IS_NO_TIST_M2) {
		/* Ignore it */
		/* This situation is also indicated in the descriptor */
		SK_OUT16(IoC, MR_ADDR(MAC_2,RX_MFF_CTRL1), MFF_CLR_INTIST) ;
	}

	if (HwStatus & IS_RAM_RD_PAR) {
		SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_RD_PERR) ;
		SK_ERR_LOG(pAC, SK_ERRCL_HW , SKERR_SIRQ_E014,
			SKERR_SIRQ_E014MSG) ;
		Para.Para64 = 0;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
	}

	if (HwStatus & IS_RAM_WR_PAR) {
		SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_WR_PERR) ;
		SK_ERR_LOG(pAC, SK_ERRCL_HW , SKERR_SIRQ_E015,
			SKERR_SIRQ_E015MSG) ;
		Para.Para64 = 0;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para);
	}

	if (HwStatus & IS_M1_PAR_ERR) {
		SkMacParity(pAC, IoC, MAC_1) ;
	}

	if (HwStatus & IS_M2_PAR_ERR) {
		SkMacParity(pAC, IoC, MAC_2) ;
	}

	if (HwStatus & IS_R1_PAR_ERR) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_P) ;

		SK_ERR_LOG(pAC, SK_ERRCL_HW , SKERR_SIRQ_E018,
			SKERR_SIRQ_E018MSG) ;
		Para.Para64 = MAC_1;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
		Para.Para32[0] = MAC_1;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

	if (HwStatus & IS_R2_PAR_ERR) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_P) ;

		SK_ERR_LOG(pAC, SK_ERRCL_HW , SKERR_SIRQ_E019,
			SKERR_SIRQ_E019MSG) ;
		Para.Para64 = MAC_2;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
		Para.Para32[0] = MAC_2;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

}

/******************************************************************************
 *
 *	Interrupt service routine
 *
 * Description:
 *
 * Notes:
 */
void	SkGeSirqIsr(
SK_AC	*pAC,		/* adapter context */
SK_IOC	IoC,		/* IO context */
SK_U32	Istatus)	/* Interrupt status word */
{
	SK_U32		RegVal32;	/* Read register Value */
	SK_EVPARA	Para;
	SK_U16		XmIsr;

	if (Istatus & IS_HW_ERR) {
		SK_IN32(IoC, B0_HWE_ISRC, &RegVal32) ;
		SkGeHwErr(pAC, IoC, RegVal32) ;
	}

	/*
	 * Packet Timeout interrupts
	 */
	/* Check whether XMACs are correctly initialized */
	if ((Istatus & (IS_PA_TO_RX1 | IS_PA_TO_TX1)) &&
	    !pAC->GIni.GP[MAC_1].PState) {
		/* XMAC was not initialized but Packet timeout occured */
		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E004,
			SKERR_SIRQ_E004MSG) ;
	}

	if ((Istatus & (IS_PA_TO_RX2 | IS_PA_TO_TX2)) &&
	    !pAC->GIni.GP[MAC_2].PState) {
		/* XMAC was not initialized but Packet timeout occured */
		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E005,
			SKERR_SIRQ_E005MSG) ;
	}

	if (Istatus & IS_PA_TO_RX1) {
		/* Means network is filling us up */
		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E002,
			SKERR_SIRQ_E002MSG) ;
		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX1) ;
	}

	if (Istatus & IS_PA_TO_RX2) {
		/* Means network is filling us up */
		SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E003,
			SKERR_SIRQ_E003MSG) ;
		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX2) ;
	}

	if (Istatus & IS_PA_TO_TX1) {
		/* May be a normal situation in a server with a slow network */
		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX1) ;
	}

	if (Istatus & IS_PA_TO_TX2) {
		/* May be a normal situation in a server with a slow network */
		SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX2) ;
	}

	/*
	 * Check interrupts of the particular queues.
	 */
	if (Istatus & IS_R1_C) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_C) ;
		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E006,
			SKERR_SIRQ_E006MSG) ;
		Para.Para64 = MAC_1;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
		Para.Para32[0] = MAC_1;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

	if (Istatus & IS_R2_C) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_C) ;
		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E007,
			SKERR_SIRQ_E007MSG) ;
		Para.Para64 = MAC_2;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
		Para.Para32[0] = MAC_2;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

	if (Istatus & IS_XS1_C) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_XS1_CSR, CSR_IRQ_CL_C) ;
		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E008,
			SKERR_SIRQ_E008MSG) ;
		Para.Para64 = MAC_1;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
		Para.Para32[0] = MAC_1;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

	if (Istatus & IS_XA1_C) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_XA1_CSR, CSR_IRQ_CL_C) ;
		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E009,
			SKERR_SIRQ_E009MSG) ;
		Para.Para64 = MAC_1;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
		Para.Para32[0] = MAC_1;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

	if (Istatus & IS_XS2_C) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_XS2_CSR, CSR_IRQ_CL_C) ;
		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E010,
			SKERR_SIRQ_E010MSG) ;
		Para.Para64 = MAC_2;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
		Para.Para32[0] = MAC_2;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

	if (Istatus & IS_XA2_C) {
		/* Clear IRQ */
		SK_OUT32(IoC, B0_XA2_CSR, CSR_IRQ_CL_C) ;
		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E011,
			SKERR_SIRQ_E011MSG) ;
		Para.Para64 = MAC_2;
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
		Para.Para32[0] = MAC_2;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);
	}

	/*
	 * I2C Ready interrupt
	 */
	if (Istatus & IS_I2C_READY) {
		SK_U16 	PhyInt;
		SK_U16 	PhyIMsk;
		SK_BOOL	IsPhyInt = SK_FALSE;
		int	i;
		/* test IRQs from PHY */
		for (i=0; i<pAC->GIni.GIMacsFound; i++) {
			switch (pAC->GIni.GP[i].PhyType) {
			case SK_PHY_XMAC:
				break;
			case SK_PHY_BCOM:
	    			if(pAC->GIni.GP[i].PState) {
					PHY_READ(IoC, &pAC->GIni.GP[i], i,
						PHY_BCOM_INT_STAT, &PhyInt);
					PHY_READ(IoC, &pAC->GIni.GP[i], i,
						PHY_BCOM_INT_MASK, &PhyIMsk);
					
					if (PhyInt & (~PhyIMsk)) {
						SK_DBG_MSG(pAC,SK_DBGMOD_HWM,
							SK_DBGCAT_IRQ,
							("Port %d Bcom Int: %x "
							" Mask: %x\n",
							i, PhyInt, PhyIMsk));
						SkPhyIsrBcom(pAC, IoC, i,
							(SK_U16) 
							(PhyInt & (~PhyIMsk)));
						IsPhyInt = SK_TRUE;
					}
				}
				else {
				}
				break;
			case SK_PHY_LONE:
				PHY_READ(IoC, &pAC->GIni.GP[i], i,
					PHY_LONE_INT_STAT, &PhyInt);
				PHY_READ(IoC, &pAC->GIni.GP[i], i,
					PHY_LONE_INT_ENAB, &PhyIMsk);
				
				if (PhyInt & PhyIMsk) {
					SK_DBG_MSG(pAC,SK_DBGMOD_HWM,
						SK_DBGCAT_IRQ,
						("Port %d  Lone Int: %x "
						" Mask: %x\n",
						i, PhyInt, PhyIMsk));
					SkPhyIsrLone(pAC, IoC, i,
						(SK_U16) (PhyInt & PhyIMsk));
					IsPhyInt = SK_TRUE;
				}
				break;
			case SK_PHY_NAT:
				/* todo: National */
				break;
			}
		}
		if (!IsPhyInt) {
			SkI2cIsr(pAC, IoC);
		}
	}

	if (Istatus & IS_LNK_SYNC_M1) {
		/*
		 * We do NOT need the Link Sync interrupt, because it shows
		 * us only a link going down.
		 */
		/* clear interrupt */
		SK_OUT8(IoC, MR_ADDR(MAC_1,LNK_SYNC_CTRL), LED_CLR_IRQ);
	}

	/* Check MAC after link sync counter */
	if (Istatus & IS_MAC1) {
		XM_IN16(IoC, MAC_1, XM_ISRC, &XmIsr) ;
		SkXmIrq(pAC, IoC, MAC_1, XmIsr);
	}

	if (Istatus & IS_LNK_SYNC_M2) {
		/*
		 * We do NOT need the Link Sync interrupt, because it shows
		 * us only a link going down.
		 */
		/* clear interrupt */
		SK_OUT8(IoC, MR_ADDR(MAC_2,LNK_SYNC_CTRL), LED_CLR_IRQ);
	}

	/* Check MAC after link sync counter */
	if (Istatus & IS_MAC2) {
		XM_IN16(IoC, MAC_2, XM_ISRC, &XmIsr) ;
		SkXmIrq(pAC, IoC, MAC_2, XmIsr);
	}

	/*
	 * Timer interrupt
	 *  To be served last
	 */
	if (Istatus & IS_TIMINT) {
		SkHwtIsr(pAC, IoC);
	}
}

/*
 * Define an array of RX counter which are checked
 * in AutoSense mode to check whether a link is not able to autonegotiate.
 */
static const SK_U32 SkGeRxOids[]= {
	OID_SKGE_STAT_RX_64,
	OID_SKGE_STAT_RX_127,
	OID_SKGE_STAT_RX_255,
	OID_SKGE_STAT_RX_511,
	OID_SKGE_STAT_RX_1023,
	OID_SKGE_STAT_RX_MAX,
} ;
/******************************************************************************
 *
 * SkGePortCheckShorts - Implementing of the Workaround Errata # 2
 *
 * return:
 *	0	o.k. nothing needed
 *	1	Restart needed on this port
 */
int	SkGePortCheckShorts(
SK_AC	*pAC,		/* Adapters context */
SK_IOC	IoC,		/* IO Context */
int	Port)		/* Which port should be checked */
{
	SK_U64		Shorts;		/* Short Event Counter */
	SK_U64		CheckShorts;	/* Check value for Short Event Counter */
	SK_U64		RxCts;		/* RX Counter (packets on network) */
	SK_U64		RxTmp;		/* RX temp. Counter */
	SK_U64		FcsErrCts;	/* FCS Error Counter */
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
	unsigned int	Len;
	int		Rtv;		/* Return value */
	int		i;

	pPrt = &pAC->GIni.GP[Port];

	/* Default: no action */
	Rtv = SK_HW_PS_NONE;

	/*
	 * Extra precaution: check for short Event counter
	 */
	Len = sizeof(SK_U64);
	SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_RX_SHORTS, (char *) &Shorts,
		&Len, (SK_U32) SK_PNMI_PORT_PHYS2INST(Port));

	/*
	 * Read RX counter (packets seen on the network and not neccesarily
	 * really received.
	 */
	Len = sizeof(SK_U64);
	RxCts = 0;

	for (i = 0; i < sizeof(SkGeRxOids)/sizeof(SK_U32) ; i++) {
		SkPnmiGetVar(pAC, IoC, SkGeRxOids[i], (char *) &RxTmp,
			&Len, (SK_U32) SK_PNMI_PORT_PHYS2INST(Port));
		RxCts += RxTmp;
	}

	/* On default: check shorts against zero */
	CheckShorts = 0;

	/*
	 * Extra extra precaution on active links:
	 */
	if (pPrt->PHWLinkUp) {
		/*
		 * Reset Link Restart counter
		 */
		pPrt->PLinkResCt = 0;

		/* If link is up check for 2 */
		CheckShorts = 2;

		Len = sizeof(SK_U64);
		SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_RX_FCS,
			(char *) &FcsErrCts, &Len,
			(SK_U32) SK_PNMI_PORT_PHYS2INST(Port));
		
		if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
		    pPrt->PLipaAutoNeg == SK_LIPA_UNKNOWN &&
		    (pPrt->PLinkMode == SK_LMODE_HALF ||
		     pPrt->PLinkMode == SK_LMODE_FULL)) {
			/*
			 * This is autosensing and we are in the fallback
			 * manual full/half duplex mode.
			 */
			if (RxCts == pPrt->PPrevRx) {
				/*
				 * Nothing received
				 * restart link
				 */
				pPrt->PPrevFcs = FcsErrCts;
				pPrt->PPrevShorts = Shorts;
				return(SK_HW_PS_RESTART);
			} else {
				pPrt->PLipaAutoNeg = SK_LIPA_MANUAL;
			}
		}

		if (((RxCts - pPrt->PPrevRx) > pPrt->PRxLim) ||
		    (!(FcsErrCts - pPrt->PPrevFcs))) {
			/*
			 * Note: The compare with zero above has to be done
			 * the way shown, otherwise the Linux driver will
			 * have a problem.
			 */
			/*
			 * we received a bunch of frames or no
			 * CRC error occured on the network ->
			 * ok.
			 */
			pPrt->PPrevRx = RxCts;
			pPrt->PPrevFcs = FcsErrCts;
			pPrt->PPrevShorts = Shorts;

			return(SK_HW_PS_NONE) ;
		}

		pPrt->PPrevFcs = FcsErrCts;
	}


	if ((Shorts - pPrt->PPrevShorts) > CheckShorts) {
		SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_IRQ,
			("Short Event Count Restart Port %d \n", Port));
		Rtv = SK_HW_PS_RESTART;
	}

	pPrt->PPrevShorts = Shorts;
	pPrt->PPrevRx = RxCts;

	return(Rtv);
}


/******************************************************************************
 *
 * SkGePortCheckUp - Implementing of the Workaround Errata # 2
 *
 * return:
 *	0	o.k. nothing needed
 *	1	Restart needed on this port
 *	2	Link came up
 */
int	SkGePortCheckUp(
SK_AC	*pAC,		/* Adapters context */
SK_IOC	IoC,		/* IO Context */
int	Port)		/* Which port should be checked */
{
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */

	pPrt = &pAC->GIni.GP[Port];

	switch (pPrt->PhyType) {
	case SK_PHY_XMAC:
		return (SkGePortCheckUpXmac(pAC, IoC, Port));
	case SK_PHY_BCOM:
		return (SkGePortCheckUpBcom(pAC, IoC, Port));
	case SK_PHY_LONE:
		return (SkGePortCheckUpLone(pAC, IoC, Port));
	case SK_PHY_NAT:
		return (SkGePortCheckUpNat(pAC, IoC, Port));
	}
	
	return(SK_HW_PS_NONE) ;
}


/******************************************************************************
 *
 * SkGePortCheckUpXmac - Implementing of the Workaround Errata # 2
 *
 * return:
 *	0	o.k. nothing needed
 *	1	Restart needed on this port
 *	2	Link came up
 */
static int	SkGePortCheckUpXmac(
SK_AC	*pAC,		/* Adapters context */
SK_IOC	IoC,		/* IO Context */
int	Port)		/* Which port should be checked */
{
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
	SK_BOOL		AutoNeg;	/* Is Autonegotiation used ? */
	SK_U16		Isrc;		/* Interrupt source register */
	SK_U32		GpReg;		/* General Purpose register value */
	SK_U16		IsrcSum;	/* Interrupt source register sum */
	SK_U16		LpAb;		/* Link Partner Ability */
	SK_U16		ResAb;		/* Resolved Ability */
	SK_U64		Shorts;		/* Short Event Counter */
	unsigned int	Len;
	SK_U8		NextMode;	/* Next AutoSensing Mode */
	SK_U16		ExtStat;	/* Extended Status Register */
	int		Done;

	pPrt = &pAC->GIni.GP[Port];

	if (pPrt->PHWLinkUp) {
		if (pPrt->PhyType != SK_PHY_XMAC) {
			return(SK_HW_PS_NONE) ;
		}
		else {
			return(SkGePortCheckShorts(pAC, IoC, Port)) ;
		}
	}

	IsrcSum = pPrt->PIsave;
	pPrt->PIsave = 0;

	/* Now wait for each ports link */
	if (pPrt->PLinkMode == SK_LMODE_HALF ||
	    pPrt->PLinkMode == SK_LMODE_FULL) {
		AutoNeg = SK_FALSE;
	} else {
		AutoNeg = SK_TRUE;
	}

	if (pPrt->PLinkBroken) {
		/* Link was broken */
		XM_IN32(IoC,Port,XM_GP_PORT, &GpReg) ;

		if ((GpReg & XM_GP_INP_ASS) == 0) {
			/* The Link is in sync */
			XM_IN16(IoC,Port,XM_ISRC, &Isrc) ;
			IsrcSum |= Isrc;
			SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum);
			if ((Isrc & XM_IS_INP_ASS) == 0) {
				/* It has been in sync since last Time */
				/* Restart the PORT */
	
				SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_IRQ,
					("Link in sync Restart Port %d\n",
					 Port));

				/*
				 * We now need to reinitialize the PrevSHorts
				 * counter.
				 */
				Len = sizeof(SK_U64);
				SkPnmiGetVar(pAC, IoC,
					OID_SKGE_STAT_RX_SHORTS,
					(char *) &Shorts,
					&Len,
					(SK_U32) SK_PNMI_PORT_PHYS2INST(Port));
				pPrt->PPrevShorts = Shorts;

				pAC->GIni.GP[Port].PLinkBroken = SK_FALSE ;

				/*
				 * Link Restart Workaround:
				 *  it may be possible that the other Link side
				 *  restarts its link as well an we detect
				 *  another LinkBroken. To prevent this
				 *  happening we check for a maximum number
				 *  of consecutive restart. If those happens,
				 *  we do NOT restart the active link and
				 *  check whether the lionk is now o.k.
				 */
				pAC->GIni.GP[Port].PLinkResCt ++;
				pPrt->PAutoNegTimeOut = 0;

				if (pAC->GIni.GP[Port].PLinkResCt <
					SK_MAX_LRESTART) {
					return(SK_HW_PS_RESTART) ;
				}

				SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
					("Do NOT restart on Port %d %x %x\n",
					Port, Isrc, IsrcSum));
				pAC->GIni.GP[Port].PLinkResCt = 0;
			} else {
				pPrt->PIsave = (SK_U16) (IsrcSum & (XM_IS_AND));
				SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
					("Save Sync/nosync Port %d %x %x\n",
					Port, Isrc, IsrcSum));
				/* Do nothing more if link is broken */
				return(SK_HW_PS_NONE) ;
			}
		} else {
			/* Do nothing more if link is broken */
			return(SK_HW_PS_NONE) ;
		}

	} else {
		/* Link was not broken, check if it is */
		XM_IN16(IoC,Port,XM_ISRC, &Isrc) ;
		IsrcSum |= Isrc;
		if ((Isrc & XM_IS_INP_ASS) == XM_IS_INP_ASS) {
			XM_IN16(IoC,Port,XM_ISRC, &Isrc) ;
			IsrcSum |= Isrc;
			if ((Isrc & XM_IS_INP_ASS) == XM_IS_INP_ASS) {
				XM_IN16(IoC,Port,XM_ISRC, &Isrc) ;
				IsrcSum |= Isrc;
				if ((Isrc & XM_IS_INP_ASS) == XM_IS_INP_ASS) {
					pPrt->PLinkBroken = SK_TRUE ;
					/*
					 * Re-Init Link partner Autoneg flag
					 */
					pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN;
					SK_DBG_MSG(pAC,SK_DBGMOD_HWM,
					   SK_DBGCAT_IRQ,
					   ("Link broken Port %d\n",
						 Port));

					/* cable removed-> reinit Sensemode */
					/* Init default sense mode */
					SkHWInitDefSense(pAC, IoC, Port);

					return(SK_HW_PS_RESTART) ;
				}
			}
		} else {
			SkXmAutoNegLipaXmac(pAC, IoC, Port, Isrc);
			if (SkGePortCheckShorts(pAC, IoC, Port) ==
				SK_HW_PS_RESTART) {
				return(SK_HW_PS_RESTART) ;
			}
		}
	}

	/*
	 * here we usually can check whether the link is in sync and
	 * autonegotiation is done.
	 */
	XM_IN32(IoC,Port,XM_GP_PORT, &GpReg) ;
	XM_IN16(IoC,Port,XM_ISRC, &Isrc) ;
	IsrcSum |= Isrc;

	SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum);
	if ((GpReg & XM_GP_INP_ASS) != 0 || (IsrcSum & XM_IS_INP_ASS) != 0) {
		if ((GpReg & XM_GP_INP_ASS) == 0) {
			/*
			 * Save Autonegotiation Done interrupt only if link 
			 * is in sync
			 */
			pPrt->PIsave = (SK_U16) (IsrcSum & (XM_IS_AND));
		}
#ifdef	DEBUG
		if (pPrt->PIsave & (XM_IS_AND)) {
			SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
				("AutoNeg done rescheduled Port %d\n", Port));
		}
#endif
		return(SK_HW_PS_NONE) ;
	}

	if (AutoNeg) {
		if (IsrcSum & XM_IS_AND) {
			SkHWLinkUp(pAC, IoC, Port) ;
			Done = SkXmAutoNegDone(pAC,IoC,Port);
			if (Done != SK_AND_OK) {
				/* Get PHY parameters, for debuging only */
				PHY_READ(IoC, pPrt, Port, PHY_XMAC_AUNE_LP,
					&LpAb);
				PHY_READ(IoC, pPrt, Port, PHY_XMAC_RES_ABI,
					&ResAb);
				SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
					("AutoNeg FAIL Port %d (LpAb %x, ResAb %x)\n",
					 Port, LpAb, ResAb));
					
				/* Try next possible mode */
				NextMode = SkHWSenseGetNext(pAC, IoC, Port);
				SkHWLinkDown(pAC, IoC, Port) ;
				if (Done == SK_AND_DUP_CAP) {
					/* GoTo next mode */
					SkHWSenseSetNext(pAC, IoC, Port,
						NextMode);
				}

				return(SK_HW_PS_RESTART) ;

			} else {
				/*
				 * Dummy Read extended status to prevent
				 * extra link down/ups
				 * (clear Page Received bit if set)
				 */
				PHY_READ(IoC, pPrt, Port, PHY_XMAC_AUNE_EXP, &ExtStat);
				SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
					("AutoNeg done Port %d\n", Port));
				return(SK_HW_PS_LINK) ;
			}
		} 
		
		/*
		 * AutoNeg not done, but HW link is up. Check for timeouts
		 */
		pPrt->PAutoNegTimeOut ++;
		if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) {
			/*
			 * Timeout occured.
			 * What do we need now?
			 */
			SK_DBG_MSG(pAC,SK_DBGMOD_HWM,
				SK_DBGCAT_IRQ,
				("AutoNeg timeout Port %d\n",
				 Port));
			if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
				pPrt->PLipaAutoNeg != SK_LIPA_AUTO) {
				/*
				 * Timeout occured
				 * Set Link manually up.
				 */
				SkHWSenseSetNext(pAC, IoC, Port,
					SK_LMODE_FULL);
				SK_DBG_MSG(pAC,SK_DBGMOD_HWM,
					SK_DBGCAT_IRQ,
					("Set manual full duplex Port %d\n",
					 Port));
			}

			/*
			 * Do the restart
			 */
			return(SK_HW_PS_RESTART) ;
		}
	} else {
		/*
		 * Link is up and we don't need more.
		 */
#ifdef	DEBUG
		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
			SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
				("ERROR: Lipa auto detected on port %d\n",
				Port));
		}
#endif

		SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_IRQ,
			("Link sync(GP), Port %d\n", Port));
		SkHWLinkUp(pAC, IoC, Port) ;
		return(SK_HW_PS_LINK) ;
	}

	return(SK_HW_PS_NONE) ;
}


/******************************************************************************
 *
 * SkGePortCheckUpBcom - Check, if the link is up
 *
 * return:
 *	0	o.k. nothing needed
 *	1	Restart needed on this port
 *	2	Link came up
 */
static int	SkGePortCheckUpBcom(
SK_AC	*pAC,		/* Adapters context */
SK_IOC	IoC,		/* IO Context */
int	Port)		/* Which port should be checked */
{
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
	SK_BOOL		AutoNeg;	/* Is Autonegotiation used ? */
	SK_U16		Isrc;		/* Interrupt source register */
	SK_U16		LpAb;		/* Link Partner Ability */
	SK_U16		ExtStat;	/* Extended Status Register */
	SK_U16		PhyStat;	/* Phy Status Register */
	int		Done;
	SK_U16		ResAb;

	pPrt = &pAC->GIni.GP[Port];
	PHY_READ(IoC, pPrt, Port, PHY_BCOM_STAT, &PhyStat);

	if (pPrt->PHWLinkUp) {
		return(SK_HW_PS_NONE) ;
	}

	pPrt->PIsave = 0;

	/* Now wait for each port's link */
	if (pPrt->PLinkMode == SK_LMODE_HALF ||
	    pPrt->PLinkMode == SK_LMODE_FULL) {
		AutoNeg = SK_FALSE;
	} else {
		AutoNeg = SK_TRUE;
	}

	/*
	 * here we usually can check whether the link is in sync and
	 * autonegotiation is done.
	 */
	XM_IN16(IoC, Port, XM_ISRC, &Isrc) ;

	PHY_READ(IoC, pPrt, Port, PHY_BCOM_STAT, &PhyStat);

	SkXmAutoNegLipaBcom(pAC, IoC, Port, PhyStat);
	
	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
		("AutoNeg:%d, PhyStat: %Xh.\n", AutoNeg, PhyStat));

	PHY_READ(IoC, pPrt, Port, PHY_BCOM_1000T_STAT, &ResAb);

	if ((PhyStat & PHY_ST_LSYNC) == 0) {
		if (ResAb & (PHY_B_1000S_MSF)) {
			/* Error */
			SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
				("Master/Slave Fault port %d\n", Port));
			pPrt->PAutoNegFail = SK_TRUE;
			pPrt->PMSStatus = SK_MS_STAT_FAULT;
			return (SK_AND_OTHER);
		}
		return (SK_HW_PS_NONE);
	}
	
	if (ResAb & (PHY_B_1000S_MSF)) {
		/* Error */
		SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
			("Master/Slave Fault port %d\n", Port));
		pPrt->PAutoNegFail = SK_TRUE;
		pPrt->PMSStatus = SK_MS_STAT_FAULT;
		return (SK_AND_OTHER);
	} else if (ResAb & PHY_B_1000S_MSR) {
		pPrt->PMSStatus = SK_MS_STAT_MASTER;
	} else {
		pPrt->PMSStatus = SK_MS_STAT_SLAVE;
	}
	
	SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL,
		("AutoNeg:%d, PhyStat: %Xh.\n", AutoNeg, PhyStat));

	if (AutoNeg) {
		if (PhyStat & PHY_ST_AN_OVER) {
			SkHWLinkUp(pAC, IoC, Port);
			Done = SkXmAutoNegDone(pAC,IoC,Port);
			if (Done != SK_AND_OK) {
				/* Get PHY parameters, for debuging only */
				PHY_READ(IoC, pPrt, Port,
					PHY_BCOM_AUNE_LP,
					&LpAb);
				PHY_READ(IoC, pPrt, Port,
					PHY_BCOM_1000T_STAT,
					&ExtStat);
				SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
					("AutoNeg FAIL Port %d (LpAb %x, "
					"1000TStat %x)\n",
					 Port, LpAb, ExtStat));
				return(SK_HW_PS_RESTART) ;

			} else {
				/*
				 * Dummy Read interrupt status to prevent
				 * extra link down/ups
				 */
				PHY_READ(IoC, pPrt, Port, PHY_BCOM_INT_STAT,
					&ExtStat);
				SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
					("AutoNeg done Port %d\n", Port));
				return(SK_HW_PS_LINK) ;
			}
		} 
	} else {
		/*
		 * Link is up and we don't need more.
		 */
#ifdef	DEBUG
		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
			SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
				("ERROR: Lipa auto detected on port %d\n",
				Port));
		}
#endif

#if 0
		PHY_READ(IoC, pPrt, Port, PHY_BCOM_1000T_STAT, &ResAb);
		if (ResAb & (PHY_B_1000S_MSF)) {
			/* Error */
			SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
				("Master/Slave Fault port %d\n", Port));
			pPrt->PAutoNegFail = SK_TRUE;
			pPrt->PMSStatus = SK_MS_STAT_FAULT;
			return (SK_AND_OTHER);
		} else if (ResAb & PHY_B_1000S_MSR) {
			pPrt->PMSStatus = SK_MS_STAT_MASTER ;
		} else {
			pPrt->PMSStatus = SK_MS_STAT_SLAVE ;
		}
#endif	/* 0 */


		/*
		 * Dummy Read interrupt status to prevent
		 * extra link down/ups
		 */
		PHY_READ(IoC, pPrt, Port, PHY_BCOM_INT_STAT, &ExtStat);
		
		SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_IRQ,
			("Link sync(GP), Port %d\n", Port));
		SkHWLinkUp(pAC, IoC, Port) ;
		return(SK_HW_PS_LINK) ;
	}

	return(SK_HW_PS_NONE) ;
}

/******************************************************************************
 *
 * SkGePortCheckUpLone - Check if the link is up
 *
 * return:
 *	0	o.k. nothing needed
 *	1	Restart needed on this port
 *	2	Link came up
 */
static int	SkGePortCheckUpLone(
SK_AC	*pAC,		/* Adapters context */
SK_IOC	IoC,		/* IO Context */
int	Port)		/* Which port should be checked */
{
	SK_GEPORT	*pPrt;		/* GIni Port struct pointer */
	SK_BOOL		AutoNeg;	/* Is Autonegotiation used ? */
	SK_U16		Isrc;		/* Interrupt source register */
	SK_U16		LpAb;		/* Link Partner Ability */
	SK_U8		NextMode;	/* Next AutoSensing Mode */
	SK_U16		ExtStat;	/* Extended Status Register */
	SK_U16		PhyStat;	/* Phy Status Register */
	SK_U16		StatSum;
	int		Done;

	pPrt = &pAC->GIni.GP[Port];

	if (pPrt->PHWLinkUp) {
		return(SK_HW_PS_NONE) ;
	}

	StatSum = pPrt->PIsave;
	pPrt->PIsave = 0;

	/* Now wait for each ports link */
	if (pPrt->PLinkMode == SK_LMODE_HALF ||
	    pPrt->PLinkMode == SK_LMODE_FULL) {
		AutoNeg = SK_FALSE;
	} else {
		AutoNeg = SK_TRUE;
	}

	/*
	 * here we usually can check whether the link is in sync and
	 * autonegotiation is done.
	 */
	XM_IN16(IoC, Port, XM_ISRC, &Isrc) ;
	PHY_READ(IoC, pPrt, Port, PHY_LONE_STAT, &PhyStat);
	StatSum |= PhyStat;

	SkXmAutoNegLipaLone(pAC, IoC, Port, PhyStat);
	if ((PhyStat & PHY_ST_LSYNC) == 0){
		/*
		 * Save Autonegotiation Done bit
		 */
		pPrt->PIsave = (SK_U16) (StatSum & PHY_ST_AN_OVER);
#ifdef DEBUG
		if (pPrt->PIsave & PHY_ST_AN_OVER) {
			SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
				("AutoNeg done rescheduled Port %d\n", Port));
		}
#endif
		return(SK_HW_PS_NONE) ;
	}

	if (AutoNeg) {
		if (StatSum & PHY_ST_AN_OVER) {
			SkHWLinkUp(pAC, IoC, Port) ;
			Done = SkXmAutoNegDone(pAC,IoC,Port);
			if (Done != SK_AND_OK) {
				/* Get PHY parameters, for debuging only */
				PHY_READ(IoC, pPrt, Port,
					PHY_LONE_AUNE_LP,
					&LpAb);
				PHY_READ(IoC, pPrt, Port,
					PHY_LONE_1000T_STAT,
					&ExtStat);
				SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
					("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n",
					 Port, LpAb, ExtStat));
					
				/* Try next possible mode */
				NextMode = SkHWSenseGetNext(pAC, IoC, Port);
				SkHWLinkDown(pAC, IoC, Port) ;
				if (Done == SK_AND_DUP_CAP) {
					/* GoTo next mode */
					SkHWSenseSetNext(pAC, IoC, Port,
						NextMode);
				}

				return(SK_HW_PS_RESTART) ;

			} else {
				/*
				 * Dummy Read interrupt status to prevent
				 * extra link down/ups
				 */
				PHY_READ(IoC, pPrt, Port, PHY_LONE_INT_STAT,
					&ExtStat);
				SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
					("AutoNeg done Port %d\n", Port));
				return(SK_HW_PS_LINK) ;
			}
		} 
		
		/*
		 * AutoNeg not done, but HW link is up. Check for timeouts
		 */
		pPrt->PAutoNegTimeOut ++;
		if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) {
			/*
			 * Timeout occured.
			 * What do we need now?
			 */
			SK_DBG_MSG(pAC,SK_DBGMOD_HWM,
				SK_DBGCAT_IRQ,
				("AutoNeg timeout Port %d\n",
				 Port));
			if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE &&
				pPrt->PLipaAutoNeg != SK_LIPA_AUTO) {
				/*
				 * Timeout occured
				 * Set Link manually up.
				 */
				SkHWSenseSetNext(pAC, IoC, Port,
					SK_LMODE_FULL);
				SK_DBG_MSG(pAC,SK_DBGMOD_HWM,
					SK_DBGCAT_IRQ,
					("Set manual full duplex Port %d\n",
					 Port));
			}

			/*
			 * Do the restart
			 */
			return(SK_HW_PS_RESTART) ;
		}
	} else {
		/*
		 * Link is up and we don't need more.
		 */
#ifdef	DEBUG
		if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) {
			SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_CTRL,
				("ERROR: Lipa auto detected on port %d\n",
				Port));
		}
#endif

		/*
		 * Dummy Read interrupt status to prevent
		 * extra link down/ups
		 */
		PHY_READ(IoC, pPrt, Port, PHY_LONE_INT_STAT, &ExtStat);
		
		SK_DBG_MSG(pAC,SK_DBGMOD_HWM,SK_DBGCAT_IRQ,
			("Link sync(GP), Port %d\n", Port));
		SkHWLinkUp(pAC, IoC, Port) ;
		return(SK_HW_PS_LINK) ;
	}

	return(SK_HW_PS_NONE) ;
}


/******************************************************************************
 *
 * SkGePortCheckUpNat - Check if the link is up
 *
 * return:
 *	0	o.k. nothing needed
 *	1	Restart needed on this port
 *	2	Link came up
 */
static int	SkGePortCheckUpNat(
SK_AC	*pAC,		/* Adapters context */
SK_IOC	IoC,		/* IO Context */
int	Port)		/* Which port should be checked */
{
	/* todo: National */
	return(SK_HW_PS_NONE) ;
}


/******************************************************************************
 *
 *	Event service routine
 *
 * Description:
 *
 * Notes:
 */
int	SkGeSirqEvent(
SK_AC		*pAC,		/* Adapters context */
SK_IOC		IoC,		/* Io Context */
SK_U32		Event,		/* Module specific Event */
SK_EVPARA	Para)		/* Event specific Parameter */
{
	SK_U32	Port;
	SK_U32	Time;
	SK_U8	Val8 ;
	int	PortStat;

	Port = Para.Para32[0];

	switch (Event) {
	case SK_HWEV_WATIM:
		/* Check whether port came up */
		PortStat = SkGePortCheckUp(pAC, IoC, Port);

		switch (PortStat) {
		case SK_HW_PS_RESTART:
			if (pAC->GIni.GP[Port].PHWLinkUp) {
				/*
				 * Set Link to down.
				 */
				SkHWLinkDown(pAC, IoC, Port);

				/*
				 * Signal directly to RLMT to ensure correct
				 * sequence of SWITCH and RESET event.
				 */
				Para.Para32[0] = (SK_U32) Port;
				SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);

				/* Start workaround Errata #2 timer */
				SkTimerStart(pAC, IoC,
					&pAC->GIni.GP[Port].PWaTimer,
					SK_WA_INA_TIME,
					SKGE_HWAC,
					SK_HWEV_WATIM,
					Para);
			}

			/* Restart needed */
			SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);
			break;

		case SK_HW_PS_LINK:
			/* Signal to RLMT */
			SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_UP, Para);
			break;

		}

		/* Start again the check Timer */
		if (pAC->GIni.GP[Port].PHWLinkUp) {
			Time = SK_WA_ACT_TIME;
		} else {
			Time = SK_WA_INA_TIME;
		}

		/* todo: still needed for non-Xmac-PHYs ??? */
		/* Start workaround Errata #2 timer */
		SkTimerStart(pAC, IoC, &pAC->GIni.GP[Port].PWaTimer, Time,
			SKGE_HWAC, SK_HWEV_WATIM, Para);

		break;

	case SK_HWEV_PORT_START:
		if (pAC->GIni.GP[Port].PHWLinkUp) {
			/*
			 * Signal directly to RLMT to ensure correct
			 * sequence of SWITCH and RESET event.
			 */
			Para.Para32[0] = (SK_U32) Port;
			SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
		}

		SkHWLinkDown(pAC, IoC, Port) ;

		/* Schedule Port RESET */
		SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para);

		/* Start workaround Errata #2 timer */
		SkTimerStart(pAC, IoC, &pAC->GIni.GP[Port].PWaTimer,
			SK_WA_INA_TIME,SKGE_HWAC,SK_HWEV_WATIM,Para);
		break;

	case SK_HWEV_PORT_STOP:
		if (pAC->GIni.GP[Port].PHWLinkUp) {
			/*
			 * Signal directly to RLMT to ensure correct
			 * sequence of SWITCH and RESET event.
			 */
			Para.Para32[0] = (SK_U32) Port;
			SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para);
		}
		/* Stop Workaround Timer */
		SkTimerStop(pAC, IoC, &pAC->GIni.GP[Port].PWaTimer) ;

		SkHWLinkDown(pAC, IoC, Port) ;
		break;

	case SK_HWEV_UPDATE_STAT:
		/* We do NOT need to update any statistics */
		break;

	case SK_HWEV_CLEAR_STAT:
		/* We do NOT need to clear any statistics */
		for (Port = 0; Port < (SK_U32) pAC->GIni.GIMacsFound; Port++) {
			pAC->GIni.GP[Port].PPrevRx = 0;
			pAC->GIni.GP[Port].PPrevFcs = 0;
			pAC->GIni.GP[Port].PPrevShorts = 0;
		}
		break;

	case SK_HWEV_SET_LMODE:
		Val8 = (SK_U8) Para.Para32[1];
		if (pAC->GIni.GP[Port].PLinkModeConf != Val8) {
			/* Set New link mode */
			pAC->GIni.GP[Port].PLinkModeConf = Val8;

			/* Restart Port */
			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
		}
		break;

	case SK_HWEV_SET_FLOWMODE:
		Val8 = (SK_U8) Para.Para32[1];
		if (pAC->GIni.GP[Port].PFlowCtrlMode != Val8) {
			/* Set New Flow Control mode */
			pAC->GIni.GP[Port].PFlowCtrlMode = Val8;

			/* Restart Port */
			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
		}
		break;

	case SK_HWEV_SET_ROLE:
		Val8 = (SK_U8) Para.Para32[1];
		if (pAC->GIni.GP[Port].PMSMode != Val8) {
			/* Set New link mode */
			pAC->GIni.GP[Port].PMSMode = Val8;

			/* Restart Port */
			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para);
			SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para);
		}
		break;

	default:
		SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_SIRQ_E001,
			SKERR_SIRQ_E001MSG);
		break;
	}

	return(0) ;
}


/******************************************************************************
 *
 *	SkPhyIsrBcom - PHY interrupt service routine
 *
 * Description: handle all interrupts from BCOM PHY
 *
 * Returns: N/A
 */
static void SkPhyIsrBcom(
SK_AC		*pAC,		/* Adapters context */
SK_IOC		IoC,		/* Io Context */
int		Port,		/* Port Num = PHY Num */
SK_U16		IStatus)	/* Interrupts masked with PHY-Mask */
{
	SK_EVPARA	Para;

	if (IStatus & PHY_B_IS_PSE) {
		/* incorrectable pair swap error */
		SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E022,
			SKERR_SIRQ_E022MSG) ;
	}
	
	if (IStatus & PHY_B_IS_MDXI_SC) {
		/* not used */
	}
	
	if (IStatus & PHY_B_IS_HCT) {
		/* not used */
	}
	
	if (IStatus & PHY_B_IS_LCT) {
		/* not used */
	}
	
	if (IStatus & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) {
		SkHWLinkDown(pAC, IoC, Port);

		/* Signal to RLMT */
		Para.Para32[0] = (SK_U32) Port;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);

		/* Start workaround Errata #2 timer */
		SkTimerStart(pAC, IoC, &pAC->GIni.GP[Port].PWaTimer,
			SK_WA_INA_TIME,SKGE_HWAC,SK_HWEV_WATIM,Para);
	}

	if (IStatus & PHY_B_IS_NO_HDCL) {
		/* not used */
	}

	if (IStatus & PHY_B_IS_NO_HDC) {
		/* not used */
	}

	if (IStatus & PHY_B_IS_NEG_USHDC) {
		/* not used */
	}

	if (IStatus & PHY_B_IS_SCR_S_ER) {
		/* not used */
	}

	if (IStatus & PHY_B_IS_RRS_CHANGE) {
		/* not used */
	}

	if (IStatus & PHY_B_IS_LRS_CHANGE) {
		/* not used */
	}

	if (IStatus & PHY_B_IS_DUP_CHANGE) {
		/* not used */
	}

	if (IStatus & PHY_B_IS_LSP_CHANGE) {
		/* not used */
	}

	if (IStatus & PHY_B_IS_CRC_ER) {
		/* not used */
	}

}


/******************************************************************************
 *
 *	SkPhyIsrLone - PHY interrupt service routine
 *
 * Description: handle all interrupts from LONE PHY
 *
 * Returns: N/A
 */
static void SkPhyIsrLone(
SK_AC		*pAC,		/* Adapters context */
SK_IOC		IoC,		/* Io Context */
int		Port,		/* Port Num = PHY Num */
SK_U16		IStatus)	/* Interrupts masked with PHY-Mask */
{
	SK_EVPARA	Para;

	if (IStatus & PHY_L_IS_CROSS) {
		/* not used */
	}
	
	if (IStatus & PHY_L_IS_POL) {
		/* not used */
	}
	
	if (IStatus & PHY_L_IS_SS) {
		/* not used */
	}
	
	if (IStatus & PHY_L_IS_CFULL) {
		/* not used */
	}
	
	if (IStatus & PHY_L_IS_AN_C) {
		/* not used */
	}
	
	if (IStatus & PHY_L_IS_SPEED) {
		/* not used */
	}
	
	if (IStatus & PHY_L_IS_CFULL) {
		/* not used */
	}
	
	if (IStatus & (PHY_L_IS_DUP | PHY_L_IS_ISOL)) {
		SkHWLinkDown(pAC, IoC, Port);

		/* Signal to RLMT */
		Para.Para32[0] = (SK_U32) Port;
		SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para);

		/* Start workaround Errata #2 timer */
		SkTimerStart(pAC, IoC, &pAC->GIni.GP[Port].PWaTimer,
			SK_WA_INA_TIME,SKGE_HWAC,SK_HWEV_WATIM,Para);
	}

	if (IStatus & PHY_L_IS_MDINT) {
		/* not used */
	}

}


/* End of File */